SuperDrew3D

chris

<h2>Introducing the Toothbrush Travel Case V2 </h2><h4>– now 20% smaller but 100% more fabulous! If you thought Version 1 was the bee&#39;s knees, wait until you see the upgrades on this beauty.</h4>Crafted by me, your friendly neighborhood 3D printing enthusiast, this case is a labor of love. Gone are the days of awkwardly large cases; our V2 fits snugly in your hand like it was custom-made just for you. Plus, I’ve added a dedicated spot for your toothpaste, so your entire dental regime travels together in harmony. The newly improved toothbrush head holder ensures your brush stays as still as a yoga master in a zen garden, no wobbles, no worries.&nbsp;Print all parts in one go – this case is a marvel of compact efficiency! I recommend using supports for printing and opting for high wall thickness to ensure your travel case withstands the rigors of your adventurous lifestyle.<h4>So why wait? Upgrade your travel game with the Ultimate Toothbrush Travel Case V2. Your teeth – and your travel kit – deserve the best!</h4>

Toothbrush Travel Case V2

Travel 

r4nd0m42

I designed these for under my desk to help keep all those pesky cables out off the way and off the floor, I wanted something that was easy to use putting cables in and out and could also store plenty of large gauge cables.&nbsp;These clips have approximately a 30mm cross section for cables, it features a single countersunk mounting hole at the top for a up to 4mm screw and a 6.5mm hole at the bottom to fit a screw driver through for easy mounting.&nbsp;The print includes a sprue to help against warping of the small clip end.&nbsp;Print time: ~30min&nbsp;Print settings used:&nbsp;After some experimentation I recommend that the parts are printed either separately or by object so as to get best accuracy in dimensions, further it may also help to print the clip part at slower speeds again to increase accuracy.&nbsp;Brim: NoneSupport: NoneInfill: 40% Triangles (too little infill will cause clip to become too flexible)Layer height: 0.2Walls: 3Bottom Layers: 3Top Layers: 3Post Processing: Remove sprue from clip and assemble

Under Desk Cable Clip Organiser

home_things

WallyMike

This model contains the Gridfinity Base for a Harbor Freight US General 26" x 22" tool chest drawer.&nbsp;Due to the dimensions of Gridfinity and the tool chest there is a approx ½" Gap around the completed structure.&nbsp;The model has 4 plates. You will need<ul><li>Plate 1 - 4 x 6 - 2 Prints</li><li>Plate 2 - 5 x 6 - 1 Print</li><li>Plate 3 - 4 x 5 - 2 Prints</li><li>Plate 4 - 5 x5 - 1 Print</li></ul>&nbsp;Layout of sections to fit the drawer.<figure class="image image_resized" style="width:40.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/657326/2024-03-07_4b37e402508e88.png"></figure>

US General 26" x 22"  Gridfinity Base

tools

tupsyvejle

No support needed if printed standing up.

SHARK SKWAL I3 GO PRO chin mount

MTB bike 

Moon-extinguisher

an adapter plate to attach a Garmin Montana 700 with case to a standard cell phone holder on the bike

Garmin Montana 700 700i with case universal bike adapter 

Moto

ProjectSkyDroid

Wanted to reprint this in PAHT-CF so it would endure the scorching Arizona summers but also wanted to make some adjustments to the design to make it even easier to print then my first version. &nbsp;Changes:-V2 now prints at a default orientation on its side with the front laying down against the plate. &nbsp;-Various small adjustments and changes have been made to reduce filament usage by about 30% since this can now be printed without using any supports. &nbsp;-The inner top face of the slots have an added ‘support’ arm added to allow for the long bridging in this area. &nbsp;-Triangular cutouts added to front face as design element and to reduce filament use while maintaining necessary rigidity. &nbsp;-Side circles cutouts have been replaced with triangular elements for different look and also to facilitate cleaner print with no supports.&nbsp;-All other mounting holes and dimensions identical to V1 and still 100% with the mounting plate.&nbsp;Designed this mounting system to for my F250s center dash console to attached AMPS and RAM mount style plates/balls. Inspired by similar systems sold by various vendors, but with adjustments to add the required rigidity for 3D printed application. &nbsp;Grab the back plate also for added strength and rigidity when attaching to the plastic dash tray:&nbsp;https://makerworld.com/en/models/61836#profileId-64262&nbsp;Printed in PAHT-CF, and is very strong.

V2 - Dash Mount for Ford F-150 2015-2020 and F-250 F-350 (2017-2022) with 8" Screen

Truck

Krookr

<h3>Model</h3>Print-in-place model to hold CR2025 Batteries.<h4>Print instructions:</h4>0.2 or less layer height. No supports needed.The hinge for this box is print-in-place. I used a 0.2mm clearance which should be fine for most well-calibrated printers. The first time you move the hinge may require a bit of pressure. Repeatedly opening and closing the box will make the hinge movement smoother. Same goes for the clasp, which may be a bit hard to open the first couple of times. Open and close it a few times, and it should be fine.&nbsp;Disclaimer:This is not my own design, but by fuchsr: https://www.printables.com/model/63026-print-in-place-customizable-cases-for-button-type-

Print-in-Place CR2025 Battery Case

Storage things

yannik.fpv

This poop chute does not require any exact magnets or anything like that but all the items you need should be in your stock if you own a bambulabs printer. REVISON 1.1 FILES NOW AVAILABLE (25th oct 2023) check following change-log and re-print for better results This is currently a prototype as its not 100% perfect.already have some improvements for next version that will be adjusted soon. I would also love to get some feedback from you - please post a make and your opinion when tested. If you think its worth some support i appreciate every <a target="_blank" href="https://www.paypal.me/yannikfpv" rel="nofollow noopener">donation</a>. The special: -Very space saving design. The box can be pulled forward so that there needs to be only about 70mm of space to the side of the printer. -No new exact parts are used that you have to buy. -The fill level of the box is easy to see. -The box can be easily gripped. -Compfortable emptying of the box even in small bags. -Appealing design Changelog: Rev 1.0 - basic files Rev 1.1 -optimized ramp for less chance of clog -added a cover for the ramps notch on the back - less chance of clog -optimized ramp for x1 printers -optimized bucket to store ~3x more poop b4 need to emptying.&nbsp;The ramp and box are printed from PLA (Or other hard plastics). To assemble, replace two housing screws on the back, the new screws are included in the spare parts to the printer (spare extruder screw & spare scrapper screw), see pictures.&nbsp;The printing parts both fit on one printing plate or can be printed separately from one another to use different colors. The models are printed with little tree support (only on printplate).&nbsp;Tip: Use a double sided tape to stick the ramp to the back of the printer when screwing. This reduces the likelihood of vibration.

Bambu (X1/P1) SMART POOP CHUTE

x1_Carbon

ildarcheg

Box: AMMO BOX 9mm AMMUNITION STORAGE 50 ROUNDS AMMO CRATE 9 mm&nbsp;Includes: - base (lower) - lid (upper) - insert - front plate multicolor - front plate single colorMaterials PLA, PETG, ABS, CFMulticolor Vs Single Color If you have a single-color printer like Ender 3 use MONO version (lid and front plate). If you have a multicolor printer like Bambu with AMS use the non-mono version (lid and front plate) and paint in Slicer.&nbsp;<h2>100+ CALIBERS AVAILABLE ON CULTS3D 2 DESIGNS</h2><h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/bbox" rel="nofollow noopener">BBOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/bbox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812775/2024-04-04_2cc9e9200b0068.png"></a></figure>&nbsp;<h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/abox" rel="nofollow noopener">ABOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/abox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812775/2024-04-04_49d3cd51ef544.png"></a></figure>   Following calibers are also available: 9mm 9 mm 40 S&amp;W 40s&amp;w 40sw 45 AUTO 45 ACP 45auto 45acp 6.5 Creedmoor 6.5 CM 243 WIN 243win 5.56 556 NATO 270 WIN 270win 308 WIN 308win 300 BLK 300blk Blackout 8x51R 8x51mm R Lebel 41 REM MAG 41 Mag 6mm ARC 6mm 6.8 REM SPC 6.8spc 224 Valkyrie 224 22-250 REM 22-250rem 450 Bushmaster 450 30-06 SPRG 30-06 Springfield 38 SPECIAL 38 S&amp;W Special 357 MAGNUM 357mag 10mm 10 mm 223 REM 223rem 7.62x51mm NATO 7.62x51 30 Carbine 7.62x33mm FN 5.7x28mm 5.7x28 7.62x39mm 7.62x39 22 LR 22 LR Long Rifle 350 Legend 9x43mm 17 HMR 17hmr 22 WMR 22wmr 44 REM MAG 44 Mag 45 Colt 45colt 6.5 PRC 6.5prc 6mm Creedmoor 6mm 300 WIN MAG 300 win 28 Nosler 28nosler 7MM REM MAG 7mm 6.8 Western 6.8western 380 ACP 380 auto 300 WSM 300wsm 8x57 mm Mauser 8x57mm 8x60 mm 8x60mm 7.5x55mm Swiss 7.5x55 6.5x55mm Swedish 6.5x55 357 SIG 357sig 30-30 WIN 30-30win 9x18 Makarov 9x18mm 7x57mm Mauser 7x57 32 ACP 32 auto 50 AE 50 Action Express Desert Eagle 32 S&amp;W LONG 32 WadCutter 375 H&amp;H Magnum 375 Holland &amp; Holland 9.3x62 mm Mauser 9.3x62mm 300 PRC 300prc 7mm RSAUM 7mm Rem SAUM 500 S&amp;W Magnum  500sw 7.62x54R 7.62x54R Mosin 45-70 GOVT 45-70govt 300 RUM 300RUM 260 REM 260rem 22-243 22-243 Middlestead 44-40 44-40 WCF Winchester 280 REM 280 Remington 458 SOCOM 458socom 303 BRITISH 303british 25-06 REM 25-05rem 280 ACKLEY 280 AI 338 LAPUA 338lapua 338 WIN MAG 338winmag 220 SWIFT 220swift 32 French 7.65×20mm Long 7mm-08 Remington 7mm08 9.3x74R 9.3x74mm 7x64mm 7x64 mm 300 Savage 300savage 444 Marlin 444marlin 35 Whelen 35whelen 460 S&amp;W Magnum 460SW 454 Casull 454casull 6.5 Grendel 65grendel 270 WSM 270wsm 8x68S 8x68 S 26 Nosler 26nosler 300 WBY MAG 300 Weatherby Magnum 256 WIN 256 Winchester Magnum 7mm PRC 7mm PRC 25 ACP 25ACP 222 REM 222rem 300 NORMA MAG 300 NORMA MAGNUM 6mm Dasher 6mm 410 ga 410 ga 22 Hornet 22 hornet 38-55 Win 38-55 WCF 7x33 Sako 7x33 6mm XC 6mmXC 375 Ruger 375Ruger 7mm BR Rem 7mm Benchrest Remington 22 Savage 22savage 250 Savage 250Savage 7mm WSM 7mm 30-40 Krag 30 US Army 50 Beowulf Beowulf 7.62x25 Tokarev 7.62×25mm Tokarev Custom Lids Feel free to reach me if you are interested in custom lids--------- ammo box, ammo crate, ammo storage, ammunition box, ammunition storage, ammunition crate, 3d print, stl, 3d model, 9mm, 9 mm

Ammo Box 9mm 50 rounds Ammunition Storage Ammo

pewpew

KefmaDE

"4 IN A ROW" is a strategic two-player board game, also known as "Connect Four." The game board consists of six rows and seven columns, where players take turns dropping their tokens. The objective is to be the first to connect four of one's own tokens horizontally, vertically, or diagonally. Players must strategically plan their moves to either create their own four-in-a-row or simultaneously block the opponent. I designed the game in a compact box, making it convenient for on-the-go or travel gaming.

4 IN A ROW - Travel Edition

games

Technikfussel

This amazing design comes from Widgets @JeremyStense_1058276 on printables. it looks amazing and i want to share it with you for a fast and easy printing experience.

sound diffusion panels  -  wall panels

Randoms

ronindesu

I needed some plugs for a panel box and rather than bulky plugs, I used XT60 connectors from my R/C toys.You can place the XT60 male or female end as needed. I made flat panel mounts and plug housings that can stack as well. This makes a solid-feeling plug setup.You will need:Plug mount- 2 M3x10mm bolts (I used socket heads. It's what I had.) and 2 M3 locknutsPanel mount holder- 2 M3x10mm bolts and 2 M3 locknuts to hold the XT60Panel mount backing- 2 M3x10mm + your bulkhead thickness (ex. 10mm+3mm bulkhead =~15mm bolt) bolts and 2 M3 locknutsIf you are stacking them, allow 10mm for each housing; 3 stacked fittings= 30mm boltThere are two plug mount files. One has arrows pointing in and one has arrows pointing out. This can be a reminder of POWER IN or SIGNAL OUT, etc.Have fun!<h3>Print Settings</h3>Printer Brand:MakerGearPrinter: <div>M2</div>Rafts:NoSupports: <div>No</div>Resolution:.20mm layers minimumInfill: <div>20-30%</div>Notes:2 perimeters, printed in PLA. This is going to be a close fit, so your machine should be in good tune. My XT60s fit in with no modification and stay locked in when closed.Prints great at .20mm and no cleanup other than maybe a light chamfer pass around the locknut holding areas with an x-acto to make it easy to insert them.You should not be tightening these bolts to crushing torque, just snug, OK?Category: Hobby

Sweet stackable XT60 panel and plug mounts

FPV_Stuff

Matthew

My 12 foot skeleton fell over and took out my streetlamp. When choosing the replacement, I knew I wanted to add a USB port to power my Wyze cam instead of taking up the electrical port with a plug in converter. I decided on using one of these: www.amazon.com/gp/product/Unfortunately, there was a small lip on the lamp where I wanted to mount the panel so I designed this simple spacer to fill in the space. It is parametric so it should be easily modifiable to anything similar that needs 0, 1, or 3 mounting holes along the centerline of the spacer.