This is a top tier print file. I printed one shoe so far (size 11.5) on a P2S. The design is flawless and easy to use. Print came out perfectly. Solid sole on the shoe, feels heavy enough to withstand some abuse. I changed a few settings but they weren't my settings. I got them from @joestarcosplay 's Insta posts (follow him for TPU tips) and the supports came off like butter. The settings I edited were in filament settings - Max volumetric speed - lowered to 4mm/s. Also, Setting overrides -Retraction - Length @ 1.2mm, Z hop when retract @ 0.4mm, Z hop type @ Spiral, Retraction Speed 35mm/s. Lastly, in Supports, i changed the Top Z distance to .24mm. The print for one shoe was a 25+ hour print but the supports came off with hardly any resistance. Update: I got both printed and have worm them a bit. I love them. Use my setting changes at your own discretion. Update 2: These filament setting overrides work on TPU 95 but not TPU 85 or 90 nearly as well. I tried it on 90.

top tier print file! this thing is double sided which I didn't realize (maybe because I didn't read) and it's amazing quality. the bottom of the print turns out flawless. I ran it on a smooth plate and textured. both were great. the top side had some slight bleeding of the black and white so I turned up the flushing settings and that worked.