SummerF

JDJDJD

The Smoothy Mount is the official mount designed for use with the <a target="_blank" href="https://makerworld.com/en/models/18174" rel="nofollow noopener">Smoothy PTFE Bowden Y Connector</a>. The Smoothy allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;The Smoothy can happily rest inline without a mount which has some advantages, but some users have requested a mounting method so I'm delivering for you!&nbsp;The Smoothy Mount features a universal mounting design so it can be used with either an M3x8mm screw or magnets.&nbsp;Having the mount separate allows for easy removal of the Smoothy without removing fasteners like screws, etc.&nbsp;I've designed a couple images with placement ideas but the location and method is up to you.&nbsp;The screw mount is most secure, while the magnets allow for more flexible placement. On the X1C, the screw hole closest to the outside edge of the machine works best.&nbsp;Several magnet sizes are now supported for flexibility (see files). The magnets need to be fairly strong. If you don't have strong magnets, I recommend the screw mounting method.&nbsp;The Smoothy Mount is compatible with Smoothy models that have flanges at both ends, which includes:<ul><li>Smoothy V2 PC4-M6</li><li>Smoothy V2 PC4-M10</li><li>Smoothy V1 PC4-M10</li></ul>If you have a Smoothy V1 M6 with no flange, simply upgrade to a Smoothy V2 and you'll be good to go!<h2>FEATURING:</h2><ul><li>No Supports</li><li>No Brims</li><li>No Overhangs</li></ul><h2>NOTES:</h2>I printed all tests successfully with the following:<ul><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Walls: 4+</li><li>Infill: Gyroid</li><li>Brims: Disabled</li><li>Supports: Disabled</li><li>Orientation: Vertical, wide side down</li><li>Glue Stick: Yes</li><li>Bambu Lab X1C</li><li>Cool Plate</li></ul><h2>UPDATES:</h2><ul><li>Support for several new magnet sizes has been added!</li></ul>The Smoothy can be used commercially, but can't be resold.&nbsp;Enjoy!&nbsp;Download The Smoothy PTFE Bowden Y Connecter here: <a target="_blank" href="https://makerworld.com/en/models/18174" rel="nofollow noopener">https://makerworld.com/en/models/18174</a>

The Smoothy Mount - For The Smoothy Y Splitter

X1CC

Dr.  J. Ma

Remake BetaFPV Pavo 20 whoop duct 3d printed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/140989/2023-10-31_0a118a627612d.gif"></figure>&nbsp;Why 3d print the ductThe original whoop duct cost $4 but your printed one is even cheaper ;-) also with different colors and to try different materials!&nbsp;Pavo20 has a molded frame with PA12 material. It is quite heavy. Here is a free version of it. It is not reverse engineering the original frame but fleshly design. &nbsp;The original whoop weighed 13.8g. &nbsp;There are 2 versions<ul><li>Lite: single wall, weighed 9.6 grams, 4 grams lighter than original molded frame. </li><li>Strong: 2 walls, weighed the same as original whoop but stronger. </li></ul>&nbsp;Original frame dimension from BetaFPV website. <figure class="image image_resized" style="width:65.92%;"><img src="https://cdn.shopifycdn.net/s/files/1/1778/6615/files/1_b9a7b382-a2e6-4c5e-959b-eaa1df63e036_1024x1024.jpg?v=1695626159"></figure>&nbsp;Suggested materials:<ul><li>PETG-CF</li><li>PLA-CF</li><li>PC</li></ul>PETG has a very similar mechanical properties to the orginal PA12 but when it with CF, it loads much better. You can also try with PLA for prototypes. &nbsp;You will need 4 m2 screw inserts with diameter 3 or 3.2 mm. Use heat insert by soldering iron or screw driver heated by a lighter. Press from top until it is the same level as the plastic part. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/140989/2023-10-30_656118fd198e1.png"></figure>&nbsp;&nbsp;

BetaFPV Pavo 20 3D Printed Whoop Duct (strong & lite)

飞机

Dicklong

This is an accessory designed specifically for A1 mini printers to prevent waste from popping up, with cat ears included ο (=• ω＜=)ρ⌒ ☆这个是A1mini专用的防止竹屎乱弹，保证每一个废料都往下落的零件，有一对小小的猫耳ο (=• ω＜=)ρ⌒ ☆

A1 mini Cat baffle

A1 Mini

wuguigui

<div><h1>Summary</h1><div>Updated 15/06/2022 Someone mentioned the magnet issue of the file"Clip Crab". I found I forgot to remove the magnet model when I export the file. Now it's fixed. Thanks.Updated 05/06/2022 Someone asked for a bigger tolerance version, I add 0.1mm tolerance, have a try:) Different settings and different machines may have different results. This is a lovely crab clip.One day when I was making an instant noodle, I couldn't find something to hold the cap of the instant noodle bowl. Then I designed this crab clip.Its claws have a rotating joint, which can be printed by one-time. The legs can be used to puncture the plastic packaging of the instant noodles.When the crab clip is resting on the refrigerator, it can hold sticks for you to deliver messages.The magnet size is D6x30mm, you can buy it on Amazon easily.0.1 layer height and more than 60% infill are recommended for strength.May the peace and love with you, enjoy! There is another Non-free version with a more rounded shape, more flexible ball joint, and multiple patterns at:<a href="https://www.myminifactory.com/object/3d-print-225769" rel="nofollow">https://www.myminifactory.com/object/3d-print-225769</a></div><h1>Post-Printing</h1><img src="https://cdn.thingiverse.com/assets/5d/f2/1e/00/49/_202205290947276.jpg" alt="image"><pre><code> <img src="https://cdn.thingiverse.com/assets/83/48/ae/2a/b9/_20220529103548.jpg"> <img src="https://cdn.thingiverse.com/assets/ae/1d/cb/5c/4e/_20220529103547.jpg"></code></pre></div>

X1CC

飞机

A1 Mini

玩具