NET-Gyver

Fomfom

Simple 120mm fan to 75mm pipe adapter.No support.

120mm Fan to 75mm Pipe Adapter

Mining

AstraCD

Drill attachment for V-Spooler!!! The best spooler out there!!!&nbsp;&nbsp;https://makerworld.com/en/models/98832#profileId-105442

V-Spooler 2 in 1 Drill and Crank Attachment

4 printer 

Heiko_Hoffmann2000

Eine Kabel Löt Hilfe mit zusätzlichen Löchern fürWiderstände und 3 mm und 5 mm Leds.&nbsp;A cable soldering aid with additional holes for resistors and 3 mm and 5 mm LEDs.

Cable Soldering Station with LED holder an Resistor/Kabel Löt Hilfe mit Led Halterung 1+3+5 mm

Elektronik 

ByteSlinger

I designed this display stand for FPV style drones.&nbsp;Buy online:If you don't have a 3D printer but would like one of these, I now sell them on my Etsy store here: <a target="_blank" href="https://www.etsy.com/uk/listing/1411458192" rel="nofollow noopener">https://www.etsy.com/uk/listing/1411458192</a>&nbsp;Whilst I built this from scratch, there are a couple already on here that I took inspiration from, but I found them either unbalanced or that they require a crazy amount of support material to print.&nbsp;This doesn't require any support material, and it can hold even larger drones (see pictured my Chimera 7 HD) at a cool looking 25 degree angle very securely.&nbsp;In the pictures you can see it holds a wide range of drones, from my Bumblebee, through the Nazgul5, all the way up to the Chimera 7!If you'd like to check if it will fit your quad in it's default scale, the two prongs are 55mm apart (centre to centre) and are 5mm wide.For most drones, you'll rest your quad with the front arms hooking behind the prongs. If however you have something more like the bumblebee, look underneath your quad and find a pair of holes that will fit them (check there are no cables, components or propellers that the prongs could damage before placing).&nbsp;<figure class="image image_resized" style="width:24.68%;"><a href="https://www.buymeacoffee.com/joshforwood" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/288427/2023-11-16_b48ac1ef59a22.webp"></a></figure>If you like this design, you can tip me via 'Buy Me a Coffee' here: <a target="_blank" href="https://www.buymeacoffee.com/JoshForwood" rel="nofollow noopener">https://www.buymeacoffee.com/JoshForwood</a> Alternatively, if you enjoy my free designs and videos on <a target="_blank" href="https://www.youtube.com/@3DRevolution" rel="nofollow noopener">my YouTube channel</a>, please support me and my channel via Patreon: <a href="www.patreon.com/3DRevolution" rel="nofollow">www.patreon.com/3DRevolution</a> You'll also gain access to the exclusive 3D Revolution discord community, and can get early or exclusive access to additional content including STLs, custom designs, and more!&nbsp;I printed this in PLA at 40% infill with Gyroid infill. You could probably get away with lower infill (especially for smaller/lighter quads), but as I was going to be using heavier quads on it I didn't want to risk it. Even if you do lower the infill for most of it, I'd recommend using a decent amount of infill on the prongs as this is what will be holding back the drone from sliding off so you don't want them to be brittle. Mine at 40% feels rock solid!<h3>Print Settings</h3>Printer Brand:PrusaPrinter: I3 MK3SRafts:NoSupports: NoResolution:0.2Infill: 40%Filament: Filamentive PLA Black Notes:&nbsp;Unlike other stands on here that either require support material or to be printed in multiple pieces, this is a single print in-place stand with no need for any support material.I printed this in PLA at 40% infill with Gyroid infill. You could probably get away with lower infill (especially for smaller/lighter quads), but as I was going to be using heavier quads on it I didn't want to risk it. Even if you do lower the infill for most of it, I'd recommend using a decent amount of infill on the prongs as this is what will be holding back the drone from sliding off so you don't want them to be brittle. Mine at 40% feels rock solid!<h3>Custom Section</h3>This item is not for commercial use!This item is for printing for personal use only. If you wish to use it for another purpose, please feel free to pop me a message. This has been used as prizes in FPV competitions etc which is great and people have been wonderful at getting in contact.Please note, this design is not by "Eric Carrender Garrido" and he has no rights to it's commercial use. He's trying to sell prints of this but please do not encourage him. If you want this item and don't have a printer of your own, pop me a message and I'll see how I can help.&nbsp;&nbsp;&nbsp;

FPV Racing Drone Stand (No Supports Needed)

Copter

Tag3mand

This version two of my other plier holder: https://makerworld.com/en/models/176903#profileId-194499 can hold up to 12 different size pliers. 7 ‘normal’ size pliers and 5 smaller ones. For example i use this for circlip pliers. This one is also made with a riser in under the pliers, so they are pushed up against the back wall, so they won't fall out.

Plier holder version 2 - Wall mounted

Organisation 

user_4212982009

搭配各种螺丝用于木板，塑料板等板材的连接固定。

corner code 木板连接件 角码

Werkstatt

NoycePrints

The first of 3 watch stands I aim to release. Like my other designs, I tried to incorporate an “industrial” theme into these stands. They look especially good with G-SHOCK branded watches however I'm sure they will suit others. Incorporated is an optional strap tensioner for those with large wrists/ straps. Simply tighten or loosen the M3 screw to adjust the tensioner. These stands look great with the optional M3 countersunk washers, however button head screws will work just fine on their own if you prefer. &nbsp;Assembly TipScrew Cradle part B to the arm first before screwing the cradle together. Print at 25% gyroid infill for a good level of strength.Add a little glue to the guide notches on cradle part B. This will help prevent the cradle from moving when removing/ displaying your watch. &nbsp;Screws required to complete:2 M3x12mm countersunk or button head screws to attach the arm to the base.2 M3x18mm countersunk or button head screws to attach the watch cradle to the arm.1 M3x10mm countersunk or button head screw to lock cradle parts A and B together. 1 M3x8mm screw for the optional Strap tensioner.

Watch stand (industrial themed)

Yedoggie

I did a remix of niltsh (<a target="_blank" href="https://makerworld.com/en/u/1906626152" rel="nofollow noopener">https://makerworld.com/en/u/1906626152</a>) awesome Hybrid Crossbow. When I initially built his model, the hand grips wear very tight due to tolerance and I ended up having to enlarge it to 100.5% to get it to fit correctly. After the build, my son asked if I could mount a rifle style hand grip so his fingers would not catch the string when he launched the balls. Well, with some simple modification, I developed a new hangrip style for him.&nbsp;MODS to original:Hand grip modificationenlarged upper and lower grips to 100.5% for easier install.&nbsp;niltsh posted a great step by step install slide on his site. <a target="_blank" href="https://makerworld.com/en/models/142373#profileId-155031" rel="nofollow noopener">https://makerworld.com/en/models/142373#profileId-155031</a>&nbsp;Items i purchase on US Amazon to make the Crossbow.<a target="_blank" href="https://www.amazon.com/dp/B088QLQL27?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B088QLQL27?ref=ppx_yo2ov_dt_b_product_details&th=1</a><a target="_blank" href="https://www.amazon.com/dp/B08XYMX5HS?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B08XYMX5HS?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;