Printed great, I would probably recommend against the Cool Plate SuperTack as it holds so well it’s very difficult to get the fabric off of the plate even with the Bambu Lab scraper. I absolutely prints beautifully with one, but with how fragile the connections are anyway some will break. I made the little random pattern in silk green and red and it looms fantastic just don’t look too closely as there are spots held together with hot glue, superglue & in one small spot a subtle piece of black tape. Once you have it put together though it moves just fine and acts kind of like a stiff canvas and seems to be usable, moving it around doesn’t shed squares. if you do have issues, you can use the cut feature in you slicer to prints section to “patch on” but pay attention to the patterns of holes and hole types to figure out where to cut

I love this thing, printed great!

Printed extremely well, no issues whatsoever. Need design and surprisingly simple spring mechanism. Took me longer than I'd like to figure out that the tolerance test model was a combination of the hinge used and the top latch. Very simple and effective. Great design and print profile.

This filament swatch organizer is great! Everything printed absolutely perfectly, the designer was extremely fast and responsive to inquiries. The compact design is great and the entire project has been designed to use as little filament as possible, the tolerances built into the design make even the thin aspects work well. I would definitely follow the designers suggestion and use a nail file, sandpaper or a sharp knife to smooth the bumps on the shuttle, particularly if you print with a matte filament. The swatch that he included has a transparency test and an area to add some text, although if it's a long name you may need a .2 nozzle to make it legible. It's a good size to frame a small thermal label with the basic info and a QR code to re-order or you could use a .2 nozzle and see what works for you.

Missing Model Parts:In order to actually install and use this model, you need to mirror the "left Side" bracket as just rotating it prevents any lower level brackets from being added after it is screwed to your shelf. If you happen to have printed exactly the number of parts you needed to fit into a set width of space, you would have wasted about $2.00 and two and a half hours per bracket that would have been wasted. Luckily I was already planning to use more and it worked out perfectly. Even a heads up in the description would suffice. This is not exactly a "print profile" issue and did not affect my rating of the print profile. In use, the weight of the filament boxes causes the ends to bow outward from plumb. I "fixed" it with a really long zip tie from the nearest middle section and the end bracket at the bottom that pulls them back in. I think you could solve with a simple bracket that connects each pair for install spacing, a backstop and to prevent bowing.

I ran a double set of these in TPU and they are perfect for dusty wiring closets!

It took me a few tries to get the height parameter right - if you set it to the actual width of the roll it is almost 1/4 too long. Once I realized what had happened it took a little trial and error but it worked great. I’d like to see this with a multipoint slot instead of screw holes for a Multiboard mount as I don’t think I’ve seen a good one yet.

Perfect print. No issues whatsoever. Designer responded immediately when I asked if other sizes would be available and they had one uploaded the day following my query. Just an all around nicely designed model. The button actions is smooth and easy, the cosmetic aspects are handled well and the tolerances for the donor rubber feet and for the Bambu Lab anti-vibration feet were exactly the right size - tight enough that it holds the feet in place and loose enough they aren't under enough pressure to pop out.

Printed perfectly!

Everything was perfect, could not be happier!