Stormblessed

ysk1025

<h2>First of all</h2><p>This model is created based on the wonderful idea from the following link. I pay my respects.</p><p><strong>Spinning top mold 陀螺模具 by 潦草小狗爱吃雪糕</strong></p><p><a target="_blank" href="https://makerworld.com/en/models/437241" rel="nofollow noopener">https://makerworld.com/en/models/437241</a></p><p>&nbsp;</p><h2>Related models are available!</h2><figure class="image image_resized" style="width: 46.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-04_075683aa86343.webp"></figure><p style="text-align: center"><a target="_blank" href="https://makerworld.com/en/models/481189" rel="nofollow noopener">https://makerworld.com/en/models/481189</a></p><p style="text-align: center"> </p><p style="text-align: center"> </p><figure class="image image_resized" style="width: 487.675px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-04_65faf2abbdd7.jpg"></figure><p style="text-align: center"><a target="_blank" href="https://makerworld.com/en/models/473846" rel="nofollow noopener">https://makerworld.com/en/models/473846</a></p><h2><span style="color: #E14747">[New Information]</span></h2><p>For those who are concerned about layer lines, try printing with the mold tilted at a 45-degree angle.</p><p>This can eliminate the steps on the top surface. Give it a try!</p><figure class="image image_resized" style="width: 59.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-12_008abeb3180f5.jpg"></figure><figure class="image image_resized" style="width: 60.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-12_afc5de07de3ac.jpg"></figure><h2>What is this ?</h2><p>This PoopKeyCap is designed to repurpose purge material (Poop) and support material generated by 3D printers into keycaps.</p><p>The mold is printed with PETG, and the stem, made with a 0.2mm nozzle, is embedded into the heated and kneaded PLA through insert molding.</p><h2>How to use</h2><h3>Print</h3><p>Please print the mold with PETG, using at least 6 wall layers and at least 5 top layers.</p><p>If you are using Bambu Studio, select the 0.2mm Strength setting.</p><figure class="image image_resized" style="width: 60.1%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_aea9507b52a53.jpg"></figure><p>Please print the stem with PLA using a 0.2mm nozzle.</p><p>It was difficult to achieve a good fit for the key switch with a 0.4mm nozzle. However, it&#39;s not impossible with a 0.4mm nozzle, so feel free to give it a try.</p><figure class="image image_resized" style="width: 60.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_724039fa03d9e.jpg"></figure><p>Insert the printed stem into the male mold. Insert it in the direction where the chamfered edges align.</p><figure class="image image_resized" style="width: 59.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_b4c62105a738f.png"></figure><figure class="image image_resized" style="width: 60.1%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_744d59bc2f0e5.jpg"></figure><h3>Applying a release agent</h3><p>Please apply a release agent to female mold.</p><figure class="image image_resized" style="width: 26.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_289f7ecb51da3.jpg"></figure><figure class="image image_resized" style="width: 59.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_917bd212cb11a.jpg"></figure><p>Wipe off any excess release agent.</p><figure class="image image_resized" style="width: 60.12%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_ca2aa0533e117.jpg"></figure><p>Use the wiped paper to apply the release agent to the male mold and other parts.(Do not apply to stem.)</p><figure class="image image_resized" style="width: 60%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_e802623b3ffe1.jpg"></figure><h3>Weighing out Poops</h3><p>You need 3.5g Poops. (in case of PLA)</p><figure class="image image_resized" style="width: 60.88%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_0f195d27ee7de.jpg"></figure><h3>Heating PLA</h3><p>Heat the PLA to around 230°C using a soldering hot plate or an oven.</p><p>Using a cup-shaped silicone mold is convenient.</p><p>If you use a hot plate, covering it with aluminum foil will help it melt faster.</p><figure class="image image_resized" style="width: 60.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_df16745da3294.jpg"></figure><figure class="image image_resized" style="width: 60.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_52f25f0db8108.jpg"></figure><p>For quicker melting and to achieve a nice marbled pattern, it is also recommended to flatten the PLA with a spatula.</p><h3>Compression molding</h3><p>Form the melted PLA into a sphere inside the silicone mold.</p><p>Once it has cooled slightly, you can also form it into a sphere using leather gloves.</p><p>The important thing at this stage is to ensure it is thoroughly shaped into a sphere to remove any air bubbles.</p><figure class="image image_resized" style="width: 60.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_5360190b44e94.jpg"></figure><figure class="image image_resized" style="width: 60.06%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_91f811e740bf6.jpg"></figure><figure class="image image_resized" style="width: 60.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_3cbdcc53ae78f.jpg"></figure><p>Once the PLA is in the mold, compress it using the mold. Hand pressure is sufficient.</p><p>Using a vise or similar tool can cause the mold to adhere too tightly, making it difficult to remove keycap and potentially damaging the mold.</p><figure class="image image_resized" style="width: 59.71%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_795b555b67db5.jpg"></figure><h3>Demolding</h3><p>Once the mold has cooled sufficiently, demold the keycap.</p><p>Using a utility knife can make it easier to remove, but be careful to avoid injury.</p><figure class="image image_resized" style="width: 60.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_cec68fac1a045.jpg"></figure><p>If it&#39;s difficult to demold with a utility knife, there are demolding protrusions that you can grip with pliers and pull to remove.</p><figure class="image image_resized" style="width: 59.75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_4f13fc7ff34eb.jpg"></figure><h3>Finishing</h3><p>Wipe off the release agent and remove any burrs using nippers or a file.</p><p>It is also a good idea to sand the entire surface to remove any layer lines.</p><p>Using thin-blade nippers for plastic models is recommended as they can cleanly cut off burrs.</p><figure class="image image_resized" style="width: 59.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_958f930c3d485.jpg"></figure><figure class="image image_resized" style="width: 60%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_f100f4948cb64.jpg"></figure><h2>Enjoy!</h2><figure class="image image_resized" style="width: 60.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_068ad0b2432a9.jpg"></figure><figure class="image image_resized" style="width: 60.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_1b046c6067acd.jpg"></figure><figure class="image image_resized" style="width: 60.17%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_f4dd8be6799d8.jpg"></figure>

PoopKeyCap Ver.Artisan

poop projects

hako85

<p>Easily test the stringing of filaments.</p><p>Approximately 13 min.</p><p>&nbsp;</p><p>Calibration requires many trials, so use a simple test model.</p>

Stringing test mini

calibration tests

Duane777

<p>Various configurations of compartments and an empty one.</p><p>Use a length of filament to complete the hinge.</p><p>Add your own text to the nameplate in the slicer.</p><p>&nbsp;</p><p><strong>To edit the text on the nameplate:-</strong></p><p>1. Set 'Global/Objects' to Objects<br>2. Select the text object in the list<br>3. click the text icon on the toolbar<br>4. Edit the text, it will jump and stick out again this is ok.<br>5. Make sure the text object is selected and click the Move toolbar icon.<br>6. Use the axis arrow to move the text in X&Y to your liking.<br>7. Enter <strong>-1.2mm</strong> for the Z position in the move popup dialog, press enter.<br>8. And you done.</p><p>&nbsp;</p><p>There is a 4 bay rack for these boxes <a target="_blank" href="https://makerworld.com/en/models/204390#profileId-224562" rel="nofollow noopener">here</a></p>

Small Items Box 175x125x30

organizers

Krookr

<p><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">Print-in-place model to hold CR2032 Batteries.</span></p><h4><strong>Print instructions:</strong></h4><p>0.2 or less layer height. No supports needed.</p><p>The hinge for this box is print-in-place. I used a 0.2mm clearance which should be fine for most well-calibrated printers. The first time you move the hinge may require a bit of pressure. Repeatedly opening and closing the box will make the hinge movement smoother. </p><p>Same goes for the clasp, which may be a bit hard to open the first couple of times. Open and close it a few times, and it should be fine.</p><p>&nbsp;</p><p><strong>Disclaimer:</strong></p><p>This is not my own design, but by fuchsr: https://www.printables.com/model/63026-print-in-place-customizable-cases-for-button-type-</p>

Print-in-Place CR2032 Battery Case

batteries

Jochen R.

<p>Holder for up to six mini SandingBlocks (https://makerworld.com/en/models/35423#profileId-33018) fits on Ikea Skadis wall.</p><p>I printed it upside down with a little support under the hangers and a higher infill for extra strengt.</p>

SandingBlock Holder for Ikea Skadis

skadis

Neebick

<p>Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.</p><h3>Printing</h3><p>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.</p><p>&nbsp;</p><p>Print at lower layer heights for better detail and smoother feel while handling.</p><p>&nbsp;</p><p>Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.</p><p>&nbsp;</p><p>I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.</p><h3>Assembly</h3><p>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.</p><figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure><p>&nbsp;</p><p>The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.</p><figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure><p>&nbsp;</p><p>Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.</p><figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure><p>&nbsp;</p><p>Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.</p><figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure><p>&nbsp;</p><p>To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.</p>

Master Sword Pen

Gifts

Brian Dean

<h2><strong>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</strong></h2><h3>PROFILE NOTE</h3><p><strong>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</strong></p><h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol><p>See below for the more detailed update notes.</p><h2><strong>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</strong></h2><p><span style="color:rgb(55,65,81);font-size:16px;">The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.</span></p><h3><strong>Key Features</strong></h3><h4><strong>Dual Dispensers for Perfect Alignment</strong></h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4><strong>Design and Utility</strong></h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4><strong>Ease of Use</strong></h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4><strong>Convenience and Storage</strong></h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4><strong>Customization and Printability</strong></h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4><strong>Visual Guide</strong></h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4><strong>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</strong></h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of <i>Version 5</i></h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol><p>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.</p><p>&nbsp;</p><p>NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.</p><p>&nbsp;</p><p>STEP and STL raw files are included if you do not wish to use the provided profile.</p><h3>Quality Assurance Testing</h3><ul><li><span style="color:rgb(55,65,81);font-size:16px;">All dispenser sizes have been printed by me and extensively tested</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">I have purchased all magnet sizes at significant expense to myself to ensure fit</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit</span><ul><li><span style="color:rgb(55,65,81);font-size:16px;">Multiple iterations of each dispenser were printed and refined</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Many kilograms of filament and hundreds of hours of print-time were consumed during this process</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">All to ensure the best quality printing and fit-up for each dispenser size</span></li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3><p>Be sure and check out some nice accessories that other folks have created to work with these dispensers.</p><ul><li><strong>Tip Caps</strong> - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li><strong>Vertical Workbench Stand</strong> - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li><strong>Vertical Workbench Stand (parametric)</strong> - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3><strong>Version 2: 2023-11-20</strong></h3><p>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.</p><ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Embedded Magnet Dispenser Tool for 3D Prints

tools n stuff

A2S dESING

<p>This is a very special wheel. Keep your rings hanging from the wheel and they will go round and round without stopping. It is very decorative and practical.</p><p>Print the pieces in the quantities indicated in the files:</p><p>Foot (Pie.stl): 2 un.</p><p>Arm (Brazo.stl): 10 un.</p><p>Support Ring (SoporteAnillo.stl): 10 un.</p><p>The rest of the files only one unit is necessary.</p><figure class="image image_resized" style="width:48.52%;"><img src="https://makerworld.bblmw.com/makerworld/draft/465729/2024-01-28_0f2e1d1954494.jpg"></figure><p>Files used to print the model on an i3 Mega S have been added.</p><p>To assemble it, we must first glue the arms to one of the wheels, making sure that they are well aligned.</p><figure class="image image_resized" style="width:56.58%;"><img src="https://makerworld.bblmw.com/makerworld/draft/465729/2024-01-28_867bfc21e83788.jpg"></figure><figure class="image image_resized" style="width:63.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/465729/2024-01-28_b8c5e96574dff.jpg"></figure><p>Later, we will glue the remaining wheel to this assembly.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/496816/rich_content/069aa1f5-b17a-43b4-9cfc-8a5a906ef047/thumbs/cover/800x720/jpg/img_20230603_160027.webp"></figure><p>&nbsp;</p><p>Once we have the complete wheel, we will insert the feet into the axis of the wheel and glue the platform to the feet.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/496816/rich_content/ad3bb9bb-9bbf-43c7-9cc0-b34d18c20cf4/thumbs/cover/800x663/jpg/img_20230603_161129.webp"></figure><p>When we have all this assembled, we will hang the ring holders on the arms. And now we can hang the rings and the wheel begins to turn and turn.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/496816/rich_content/de9de5f8-c12b-4681-93f6-6e827118c85d/thumbs/cover/800x941/jpg/img_20230603_161207.webp"></figure><p>I hope you liked this model and enjoy it.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/496816/rich_content/c258c386-6c1a-4e40-bccc-a6550ea4c8d7/thumbs/cover/800x1171/jpg/img_20230603_162317.webp"></figure><p>&nbsp;</p><p>&nbsp;</p>

Wheel of rings

xtina?

MKCAMC

<p>I designed this modular spice rack to be stacked as high as you need it. Then a lid is placed on to to allow you to place items on top of the rack. It can be kept on the counter of in the cabinet. All of the pieces interlock well and there is no need for glue. Each section has slots for 4 bottles and a slot for small bags of spices. No supports are required for this print. I tried to make it as efficient as possible to reduce the amount of filament it takes to print each section. It only uses 177g of filament per section. Each slot is 52mm in diameter. If you would like to scale it for larger jars, you can use that as a point of reference.</p>

Modular Spice Rack

stuffs

Wcad00

<p>Update december 1st</p><ul><li>the chair is modified with a larger magnet hole </li><li>the missiles from the underside launcher are a little smaller</li><li>the back gun now has an aligment to make it easier to fit</li><li>updated the assembly pdf with the underside launcher and cockpit assembly</li></ul><p>&nbsp;</p><p>&nbsp;</p><p>This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.</p><p>the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..</p><p>all pieces printed perfectly and require no sanding.</p><p>Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.</p><p>its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeous</p><p>Also it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.</p><p>&nbsp;</p><p>Also photos are available at</p><p>https://s.go.ro/vs3zltii | password: 230926</p><p>there are over 60 so i couldnt upload them here.</p><p>Next few days i will upload better quality photos of the entire plane</p><p>&nbsp;</p><p>I also have a project for a batman beyond style vehicle, it will be proportional to this one. so stay tuned if you like my overall aesthetic .</p>

Batwing

ooooo

Chris1974

<h2>Summary</h2><p><strong>3-11-2023 New Version of THE BASE!</strong></p><p>&nbsp;</p><p>This is the thing you never knew you needed. But once printed you can't understand how you ever lived without it.</p><p>&nbsp;</p><p>It is a very sturdy base for your printer that organises all your printer accessories neetly within the footprint of the printer.</p><p>If you want to find out if this is worth printing, just go and read the comments.</p><p>&nbsp;</p><p>It features:</p><ul><li>Storage space for 4 buildplates</li><li>Storage space for your gluestick, scraper and small tools (left and right side versions)</li><li>2 slide out drawers to store spare parts and other tools</li><li>No screws or extra parts needed</li><li>It is compatible with my popular Poop chute (<a target="_blank" href="https://makerworld.com/en/models/15350" rel="nofollow noopener">https://makerworld.com/en/models/15350</a>)</li></ul><p>And the best thing is… It looks like it came this way from the factory!</p><p>&nbsp;</p><p>The system is modular, so print only the parts that you want / need.</p><p>&nbsp;</p><p>Let me know what you think and post your makes below!</p><p>&nbsp;</p><p>Enjoy!!!</p><p>&nbsp;</p><p>The download contains:</p><ul><li>The .stl files of all parts</li><li>The .step files of the model for easy remixing</li><li>The .3mf file with all parts on plates with the settings I used for printing</li><li>Different frontplates so you can add your own text</li><li>TPU feet to keep the tray from sliding on your workbench</li><li>You don’t need screws or glue. The parts snap together with a press fit.</li></ul>