Stefan E.

bambaxp

Make up organizer

Badezimmer

FiBaLi

Servus eggs in multiple sizes have fun with it&nbsp;&nbsp;

Egg XXL

Ostern

Vitormhs

tiktok led light box

TikTok

technerd

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, USB or battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

Liebe

Adam L

This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing.One of the things the Bambu X1/X1C/P1P printers cannot do for you is calibrate fan speeds for different filaments auto-magically. Temperature and cooling, along with flow and pressure advance is important to do for good printing performance, particularly for overhangs & bridging performance, as well as stringing.This model tests curved, straight, and thin overhangs in different orientations and by repeatedly printing a model at different heights. I have pre-sliced Fan and Temperature 3MF files for you, but you can “Scan” any printing variable you wish at 10 mm intervals. This model tries the most challenging types of curved overhangs, up to 90%, as well as bridges (100% overhang). It also prints several tiny features to make sure you don't accidentally over-optimize for one area of performance at the cost of another. <h3>Which file should I use?</h3>Bambu/SoftFever Users : (other slicers see below)Note: These files assume you are using an X1C (machine I tested on). If you are using a X1 or P1P or other machine, you will need to copy/paste the custom before-layer-change code into a copy of your machine's profile and save a copy and then slice. See the temperature instructions below for where to find this.<ul><li>Temperature : 5xTempScan.3MF (This file does 5 different temps)</li><li>Fan Speed: 10xFanScan.3MF (This file scans 10 different speeds)</li></ul>If you use another slicer or want different sizes, STEP & STL files are included for 10x,5x,1x and separate base and repeating unit.<h3>Important Instructions:</h3>It is very important to make sure you're scanning the variable you think you are by checking in the slicer preview (temperature or fan speed view). Additionally, my files have a preset for Overture PETG by default setup. Make sure to change it to your filament of choice!<ul><li>For fan-scanning it is very important to change your filament cooling settings temporarily to not conflict with the machine “before-layer-change” overrides that have been setup for you in the 3MF files! Simply change your filament settings to specify no cooling for the first 1000 layers to prevent issues:<img src="https://media.printables.com/media/prints/366923/rich_content/7c30eb2f-215d-40f5-a9b8-f33c1422ce7d/image.png#%7B%22uuid%22%3A%22a0adba3d-26a2-4ef2-9c0c-58fe0fbb40e9%22%2C%22w%22%3A483%2C%22h%22%3A192%7D"></li></ul>&nbsp;<ul><li>For temperature scanning you will need to go into the machine GCODE settings and set the temperatures you want to scan. Click here to open the dialog, and then find the Before Layer Change G-Code dialog and modify the temperatures you want to scan, along with your starting temperature (see other-slicer instructions):</li></ul><img src="https://media.printables.com/media/prints/366923/rich_content/96879c10-0de8-4dfb-b9a0-68be29a72d75/image.png#%7B%22uuid%22%3A%22bda48a94-9eb2-45df-84a7-5aaaa48435ec%22%2C%22w%22%3A536%2C%22h%22%3A124%7D">Then change the yellow highlighted values:<img src="https://media.printables.com/media/prints/366923/rich_content/d9a1de9c-6617-4bd0-8b23-46a41434b880/image.png#%7B%22uuid%22%3A%224ab758ee-a8fc-45a6-a2b2-33d527c7fb2d%22%2C%22w%22%3A744%2C%22h%22%3A288%7D">&nbsp;PrusaSlicer / SuperSlicer / Other Users:<ul><li>I've provided the STL & STEP files for you folks. You'll need to configure your slicer to scan the variable you want by adding the appropriate “Before Layer Change G-Code” in your slicer. Here's copy-paste templates for 5x Temperature and 10x Fan towers: </li></ul>Example Temperature code:<code>{if layer_z<2.0}M104 S285 ; Temp Tower starting temp</code> <code>{elsif layer_z<=12.0} M104 S285 ; Temp Tower Temp #1</code> <code>{elsif layer_z<=22.0} M104 S280 ; Temp Tower Temp #2</code> <code>{elsif layer_z<=32.0} M104 S275 ; Temp Tower Temp #3</code> <code>{elsif layer_z<=42.0} M104 S270 ; Temp Tower Temp #4</code> <code>{elsif layer_z<=52.0} M104 S265 ; Temp Tower Temp #5</code> <code>{endif}</code>Example Fan Code:<code>{if layer_z<2.0}M106 S0 ; FanTest floor 1 (no fan)</code> <code>{elsif layer_z<=12.0} M106 S26 ; FanTest floor 2 (10% fan)</code> <code>{elsif layer_z<=22.0} M106 S51 ; FanTest floor 3 (20% fan)</code> <code>{elsif layer_z<=32.0} M106 S77 ; FanTest floor 4 (30% fan)</code> <code>{elsif layer_z<=42.0} M106 S102 ; FanTest floor 5 (40% fan)</code> <code>{elsif layer_z<=52.0} M106 S128 ; FanTest floor 6 (50% fan)</code> <code>{elsif layer_z<=62.0} M106 S153 ; FanTest floor 7 (60% fan)</code> <code>{elsif layer_z<=72.0} M106 S179 ; FanTest floor 8 (70% fan)</code> <code>{elsif layer_z<=82.0} M106 S204 ; FanTest floor 9 (80% fan)</code> <code>{elsif layer_z<=92.0} M106 S230 ; FanTest floor 10 (90% fan)</code> <code>{elsif layer_z<=102.0} M106 S255 ; FanTest floor 11 (100% fan)</code> <code>{endif}</code>&nbsp;Other Printing Details<ul><li>Filament Print Temperature: Any filament will work for temperature scanning. I recommend using default fan settings for that filament type when scanning temperatures to get a good guess at which temperature is ideal.</li><li>Filament Fan Speeds: This test variant is particularly useful on filaments that need to balance strength or warping with detail and quality. Typical examples include PETG, Nylon, ABS, etc. </li><li>Layer height: Typically 0.20 or 0.16 mm. The 3MF files provided are the faster 0.2 mm prints, but are easily changed by adjusting the layer height in the slicer. 0.2 mm is also more challenging and may help accentuate temp/cooling differences. However, you should use whatever layer height you use the most frequently.</li><li>Nozzle size: This test assumes you are using a standard 0.4 mm nozzle, but in theory can work with any nozzle with some adjustments.</li></ul>Why did I make it this way ?I adapted this model from the thingiverse model <a href="https://www.thingiverse.com/thing:2003594/files" rel="nofollow">here </a>, but made several modifications to really push the printer hard to accentuate differences between different settings. These included adding several new features and adjusting the overhangs to be longer and more aggressive in various different ways.Which printers does this work with ?Any printer! However, the 3MF files contain BambuSlicer settings to make people's lives easier who use that slicer. This was sliced with<a href="https://github.com/SoftFever/BambuStudio-SoftFever" rel="nofollow"> SoftFever's fork </a>(v1.4.2) of the official BambuSlicer, but it is also drop-in compatible with the official slicer. Works fine also with PrusaSlicer, but you'll need to do your own “before layer change” setups for fan/temperature.

Scan Tower : Calibrate a Filament's Fan & Temperature Settings (Bambu X1/X1C/P1P or any printer)

Testdrucke

Williams Industries

This is included in my Patreon below, which will have about 100 files in total for the Halloween themed drop. This is a layered print and this is meant to be printed on a Bambu with AMS or Multicolor printer. Makes for great wall art, or you can scale it down and add a magnet on the back for a magnet. If you would like to sell this, please join my patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

Happy Halloween Sign 

Halloween

Print4Gods

Bambu Lab X1 Screen Protection CoverYou only need 1.75mm Filamet to assembleI've improved the print bed adhesionHave Fun

Bambu Lab X1 Screen Protection Cover

Bambu X1 Zubehör

mcgybeer

Articulated Lizard, the original!No supports or assembly required. Just slice and print!!

Articulated Lizard v2

Articulated

Bastien

WORK IN PROGRESS&nbsp;First, I want to thank 86duino the original author for his excellent work, we can find it on <a href="https://cults3d.com/en/3d-model/game/super-mario-complete-set" rel="nofollow">cults</a> and <a href="https://www.thingiverse.com/thing:1991111" rel="nofollow">thingiverse</a>.I really like the work done but the watermark completely “distorts” Mario...so I made the following changes:<ul><li>removed watermark on the right leg</li><li>removed watermark on both gloves</li><li>removed watermark behind the head (this one was hidden, I realized it after)</li></ul>&nbsp;<ul><li>added “marks” on gloves</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/2918283e-84fb-4d94-8272-a13ee567dc90/capture-decran-2023-05-22-a-193747.jpg#%7B%22uuid%22%3A%2289ec36c1-5270-4cd7-8e3d-0c4ba56782cb%22%2C%22w%22%3A880%2C%22h%22%3A876%7D"></li><li>added theeth to the smile</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/ae1009aa-d035-45cb-82fe-0486875c8621/capture-decran-2023-05-22-a-195422.jpg#%7B%22uuid%22%3A%225e733898-a9cf-48c2-8674-2a169464d138%22%2C%22w%22%3A652%2C%22h%22%3A632%7D"><img src="https://media.printables.com/media/prints/487664/rich_content/22b09f86-cf87-4aa5-bcc1-1f1f5c150682/capture-decran-2023-05-22-a-200526.jpg#%7B%22uuid%22%3A%223e190a02-e97f-42be-b6d8-44030a460341%22%2C%22w%22%3A1438%2C%22h%22%3A766%7D"></li><li>added fully printable eye</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/83cfe222-39c7-493a-a598-2f522d0a33c0/capture-decran-2023-05-22-a-195707.jpg#%7B%22uuid%22%3A%22f505f3a3-1c26-47f4-8786-00a38395428a%22%2C%22w%22%3A652%2C%22h%22%3A632%7D"><img src="https://media.printables.com/media/prints/487664/rich_content/64ed3ab1-8fb6-43d4-8423-eed108283393/capture-decran-2023-05-22-a-200448.jpg#%7B%22uuid%22%3A%22378b6dac-0ef3-4fec-b57a-8a0c2baa0637%22%2C%22w%22%3A1350%2C%22h%22%3A884%7D"></li><li>added fully printable logo M</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/dbc7bf7b-c6b3-4c00-8bbb-0b45b730c8a3/capture-decran-2023-05-22-a-195747.jpg#%7B%22uuid%22%3A%22d778452b-27d8-46ed-a02e-0deecc17a055%22%2C%22w%22%3A652%2C%22h%22%3A632%7D"><img src="https://media.printables.com/media/prints/487664/rich_content/2aa0e20b-b2ae-43ea-b513-e3e65254dab0/capture-decran-2023-05-22-a-200556.jpg#%7B%22uuid%22%3A%2203de00f9-7ca4-427f-8ff5-af70a5856f97%22%2C%22w%22%3A1534%2C%22h%22%3A766%7D"></li></ul>I have a multi-material printer and was able to print the mouth, eyes and M logo by painting from the Slicer, but I also printed a <a href="https://www.thingiverse.com/thing:2939398" rel="nofollow">Luigi where the author</a> had separated all the colored parts for everyone to print. As a result I created an assembly version of Mario by separating the M logo from the cap in 2 parts, the eyes in 3 parts and the mouth in 2 parts.&nbsp;There is 2 folders:<ul><li>Painting or MMU contains the closest files to the original, only the watermarks have been removed and the gloves have been modified</li><li>Multipart contains all the modifications but also the eyes, the mouth and the logo in several parts</li></ul>The tolerances can be different depending on the calibration of your printers, make a test by printing the 3 parts of the eyes.The model is 90cm high, happy printing

Mario reworked (no watermark)

Figuren

Grumpy Ol Vet Printing

Merry Christmas Ornament&nbsp;Feel free to use this as you see fit. Please don't sell the stl or 3mf files as I would like to keep them open and free. If you would like to sell the actual model, that's fine too, but I would ask that you consider buying me a coffee or something. My cashapp is $dejjen.

Merry Christmas Ornament

Weihnachten

Spoolholder / Adapter für GRAUTS Spulen