Starport 75

MottN.

OverviewThis is a wall mounted counter sign that uses customizable sign plates. The signs can be made with the MakerLab make my sign app. You can use some that I have uploaded or make your own - instructions for sizing are below.&nbsp;Unfortunately at this time this is not printable on the A1 Mini. I might make a scaled down version in the future.&nbsp;The sign features a face plate that holds two dials which can be turned from the left or right. Springs on both dials make turning snappy and keep the display indexed on a number.&nbsp;&nbsp;There are 3 hang points at the top.<img src="https://makerworld.bblmw.com/makerworld/draft/238906/2023-11-28_70a731e70ec85.png">&nbsp;Once Printed, snap pegs, springs, and respective dials into position.&nbsp;Parts PrintingPrint each plate of the included print profile, or print parts as below.&nbsp;1x of each dial. Apply a color change at height for the numbers, and I recommend fuzzy skin on the lower part of the dial so it is a little more grippy when turning.&nbsp;Face 1x - make sure and print with no supports.&nbsp;springs 2x. PLA is fine. PETG is good too but will be a little less stiff.&nbsp;Pegs 4x&nbsp;I put the small parts (springs and pegs) onto their own plate. You could print together with the bigger parts, but I wanted the pegs for mine to be white to match the sign backgrounds.&nbsp; Make Your Own SignsThis counter uses an upper and lower sign, make each as indicated.If you have a good idea for sign plates for use with this counter, Upload your signs as a remix to this file so other people can easily find them!&nbsp;&nbsp;Parameters:<ul><li>Dimensions<ul><li>Upper sign size: 200x50mm</li><li>Upper sign size: 200x100mm</li></ul></li><li>Keep default base plate thickness of 1mm</li><li>Select double holes on top<ul><li>Hole size 5mm</li></ul></li><li>Important! Do not change default corner radius.<ul><li>Corner radius changes the hole distance from the edge, so if this is anything other than 10mm, you sign holes will not line up with the pegs on the counter board.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/238906/2023-11-28_efbd46adf67a.png">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Existing SignsI will update this to add signs as either print profiles or remixes.&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)

Counter Sign, Customizable

Mechengg

This is inspired by the “Annoying Gift Box” that most people (including my wife) have seen on TikTok.&nbsp;The size of the original is quite small, and the 3 different versions of it didn't give me exactly what I was looking for. I wanted a large internal volume (4"x4"x4"), and I wanted this to look like a Christmas present with zero visible screws. So obviously I spent far too much time modeling this up and figured that I would share it for free instead of charge people for it :)&nbsp;3 BoxesRibbon & Bow120 total screws&nbsp;You do need a few dabs of CA glue to hold the inner box posts in place. :) You can add glue for the white threaded part as well but it works without it&nbsp;Thanks for viewing, and take a look at my other models for things that I have designed for myself because the originals weren't exactly what I was desiring&nbsp;EDIT: I have also designed a bin with magnetic slide lid for storing the multitude of screws. 3 partitions to separate by color :)<a target="_blank" href="https://makerworld.com/en/models/82815#profileId-88321" rel="nofollow noopener">https://makerworld.com/en/models/82815#profileId-88321</a>

Gift Box w/ 120 Screws

Gifts

jakobgeltinger

Mount for the xTool m1 plotter kniveI used 13mm doublesided tape to attach it to my xtool

xTool m1 Plotter Mount

XTool

Jorge Rui

<blockquote>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;For a small help use this affiliate link to buy fillament, it will cost you the same. Thanks !<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a><a target="_blank" href="https://shrsl.com/4cpox" rel="nofollow noopener">Complete hotend for the X series</a><a target="_blank" href="https://shrsl.com/4cpoy" rel="nofollow noopener">Hotend with nozzle X series</a><a target="_blank" href="https://shrsl.com/4cpov" rel="nofollow noopener">Other Accessories</a>&nbsp;</blockquote><h2>A note about this model</h2>There is a nes and updated version of this, with a modular approach, based on my <a target="_blank" href="https://makerworld.com/en/models/13415?profileId=13268" rel="nofollow noopener">MMSS</a>, and is available <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">here</a>.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_37429ce72890f.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b69a4d08ab4d8.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_8fb4405968195.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_de4c9a7b9700e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_97413a6c36b6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b12c00384f143.jpg"></figure></td></tr></tbody></table></figure>Nevertheless, this one was my first take on this, and I think it’s nice for you to have something to store your tools and accessories ;)&nbsp;This is a debugged version of the initial release. It presents all the updates and some improvements that have been implemented in the meantime. This version will be updated over time.The entire production sequence was updated in order to translate the comments that were made over time by members. However, you are free to define your own printing strategy. The colored areas are already found as separate objects, therefore it is not necessary to use the painting tool, an exception for the areas where the accessories come reside; in this situation, I chose not to create different bodies, as it is my opinion it would take too long to print, increasing the potential for errors. In this last situation, and if you want, you can simply use the “area painting tool”.<h2>Instructions</h2>ClipsSome examples regarding fits and snapfits. <a target="_blank" href="https://youtu.be/TNyjlRgM0HY" rel="nofollow noopener">(youtube link)</a>&nbsp;Extra material:<ul><li>For the hinges, you will need 2x M4x30 CHC ISO 4762, or a FHC of the same size. If you don&#39;t have that you can print.</li><li>You may want the scrape… you can find it <a target="_blank" href="https://www.printables.com/model/531116-small-scraper-tool" rel="nofollow noopener">here, it is a model that I&#39;ve Remixed</a></li><li>spacer_ silicon_sock.STEP - needed if you have a narrow silicon sock on the hotend (most people will need this)</li></ul><h3>Change Log:</h3><ul><li>(31-08-2023) Revised Latch - More functional<ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li><li>(29-04-2024) Revised Latch - More functional <ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li></ul>&nbsp;

fun

Gifts

XTool

Bambu Tools