Square3D

<blockquote>The Ferrari F40 (Type F120) is a mid-engine, rear-wheel drive sports car engineered by Nicola Materazzi with styling by Pininfarina. It was built from 1987 until 1992, with the LM and GTE race car versions continuing production until 1994 and 1996 respectively.</blockquote>This is my way of paying tribute to this great piece of engineering. The Ferrari F40 is, in my opinion, one of the most beautiful cars ever made by Ferrari and up to today is still an iconic car.&nbsp;This was made with just enough white layers to be though but also to be able to drop a light in background and make a beautiful lighted work of art. The black lines were carefulyl worked to be printed perfectly with a layer height of 0.08mm without losing any detail and are 1mm in height to make the silhouete pop more. In just 2 hours you can have this printed and hang it in your office, living room or just by your side so you can admire it.&nbsp;Please use the included profile as it uses certain settings that otherwise won't print good enough and you will get some missing lines if anything is changed. be warned!&nbsp;This can be printed in any printer and only need a color change at the layer where the car starts to have form. You can also resize it in every direction except on the Z axis or you will get deformations on the drawing.&nbsp;As always, if you enjoyed this model, then i invite you to check <a target="_blank" href="https://makerworld.com/en/@Square3D" rel="nofollow noopener">my other models</a>. Maybe there is something you like. And post your prints. It's always awesome to see what others have made.

Ferrari F40 Wall Art

Wall Art

I had to print this little cute Bear Piggy Bank and i have to say, i am really impressed. Fits Euro Coins perfect!No hardware needed, all parts printed and retrofited to only 4 colors perfectly. No need for AMS, every plate has 1 color or print by object/color. Only need glue! Keep reading carefully please!<figure class="image image_resized" style="width:14.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696552/2024-03-13_7f8480a93faba.gif"></figure>This is a remix. I have modified some parameters in parts of the model that were too lose or too tight in some parts and wouldn't fit or would not hold together when joined. I printed several iterations until i got a perfect result as can be seen in the pictures. Also corrected rotation and small size increments so it can be tight but not too tight.&nbsp;All the plates are ready with all settings ready to print, with all the colors assigned already. There are 4 plates and they are named for the corresponding parts and colors. Use the included profile for correct supports, clearances and ready to print!&nbsp;Every plate has their own settings as well supports for each of them. Some plates have parts in “print by object” and that way you don't need AMS. The other plates have their own support type that should come out easily without tools.Again, don't modify the profile or it won't print as it should! Use the included profile and change only the colors you want!&nbsp;Instructions from the creator in the following video:&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=njh3S9VZ788"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/njh3S9VZ788" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Creator:Thanks to <a target="_blank" href="https://www.thingiverse.com/erwoong/designs" rel="nofollow noopener">Jwoong</a> that came with the idea and the creation of this model!You can find this model <a target="_blank" href="https://www.thingiverse.com/thing:4809969" rel="nofollow noopener">here</a>!&nbsp;License and Attribuition:Published, shared and given the according attribution respecting the original license, as per original model (<a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">CC-BY-NC-SA 4.0</a>)I do not own this model in any way or make any money from it. Respect the creators so they can model more like this!

Cute Bear Piggy Bank

Piggy Banks

Do you like fidgets? I love them, but they are becoming boring and almost the same model everywhere.&nbsp;Here's my new toy. Built from the ground up to give you lots of wasted time spining that sweet tire.This is a print in place fidget! No assembly! No gluing parts! No printing parts without an end! Just choose your color combination and if you prefer normal or low profile tires and send it to the printer.&nbsp;Every part of this fidget is highly customizable. You can color every part of the rim as you wish. Nuts, center cap, outer rim ring, inner rim, tire and the rim itself. Create lots of combinations or paint it like your own car and make it yours.Read the instructions after this please!<figure class="image image_resized" style="width:213.688px;"><img src="https://makerworld.bblmw.com/makerworld/draft/704514/2024-03-14_92022fbe3f338.png"><figcaption>Make it yours!</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/704514/2024-03-14_41522736314ba.png"><figcaption>Highly customizable! Every part!</figcaption></figure>Instructions: In the profile are both versions, a normal Tire profile and a low profile Tire, pick one or both to print. After the print is finished, let it cool or you will risk that the inner rim gets soldered to the tire part. If it doesn't come lose already from the plate, give it a little wiggle back and forth and it should become free and spining with only a few twists. It spins really well after a few minutes, as you can see from the video i posted. Don't change any setting in the profile. Clearances are tight enough for this to work!&nbsp;In my MakerWorld profile are two diferent <a target="_blank" href="https://makerworld.com/en/models/254594#profileId-270951" rel="nofollow noopener">Rim designs</a> available. Check the one you like. More coming in the future or if there is a request for it.&nbsp;As always, if you liked this design, <a target="_blank" href="https://makerworld.com/en/@Square3D" rel="nofollow noopener">check my other models too</a>.

Fidget Enkei Rim with Tire (Print in Place)

Fidgets

This portable storage box came from an idea that my wife and daughter had but they couldn&#39;t quite model it as they wanted.So i gave them a hand and this is the end result, a portable storage box where they keep it in their purse and can store their lipstick and some other “women” stuff. &nbsp;keep it at home in your bathroom, filled with your daily things and when you go out, just pick it up from the stand and put it in your purse/pocket. No more forgetting stuff you need!It&#39;s quite compact and can be printed in any color. It even has a stand for it if you want to keep it at home and ready to pack!&nbsp;I advise against modifying the profile because it&#39;s already made with several improvements such as variable layer height, supports and quality wise overall. But you do you and if you want to modify the profile settings, just be aware that the end result may not be the same.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000396384/design/2024-03-26_19a30fe9243f2.gif"></figure>As always, if you enjoyed this model, please take a look at <a target="_blank" href="https://makerworld.com/en/@Square3D" rel="nofollow noopener">my other stuff in my profile</a>

Pill Shaped Portable Box

Storage and Boxes

ired of watching youtube or social networks while holding your phone? Always having to have that phone stand with you all the time? Then look no further because i got your back! Or in this case, your phone&#39;s back with all the variations i came up to. From 3D effect spiral, hexagons, the famous “Cheese Grater” Mac, Plain with Apple Logo and more. Just choose the profile you like! Continuing after my <a target="_blank" href="https://makerworld.com/en/models/219139#profileId-265358" rel="nofollow noopener">3D effect phone case</a> that i made for my wife&#39;s phone, i present you the next iteration of the same effect for your Iphone 15 Pro Max, and fits the 14 Pro Max too but with a built in stand. Plus some more variations in my profiles. Pick yours! <boostme><boosttitle>Boost Me</boosttitle><boostcontent>No boost obligation. But thanks if you give me one </boostcontent></boostme>Watch your movies, browse tiktok or instagram while your phone is in front of you without having to have another stand around. Just flip your case, pull the stand out and “voilá”…Works in vertical and horizontal mode!&nbsp;*As seen in these small clips, the stand should stay in place no matter how you “jiggle” your case. It should click in place when closing the stand. If you don&#39;t hear a clicking sound, then it means the stand will flop around. I found that while talking with other people that had printed one in a different material (Silk PLA and CF). PLA is advised because it was what i tested. Also, the profile has it&#39;s own settings and touching it can cause failures. Also added pictures of the phone inside the case showing it fits without a problem.&nbsp;<img class="image_resized" style="width: 34.55%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498494/design/2024-06-18_d758dc3653c96.gif"><img class="image_resized" style="width: 34.51%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498494/design/2024-06-18_c329b9939f64b.gif">*After print finished: let it cool! Don&#39;t try and force it or it can damage the part. After cooled, pry open the stand part carefully until you hear a “snap”. That means that the retaining pins are now loose and you can open the stand as normal. Remember, let it cool!!!&nbsp;*Please don&#39;t change any settings other than colors. All the cases back are designed to be sliced with those effects. If you want a plain case, you have one here or you can print one from other creators.&nbsp;*Wireless charging works too! Magsafe not possible due to the stand!&nbsp;Have fun, eat a snack! You have your hands free now…&nbsp;&nbsp;

Iphone 15/14 Pro Max with Builtin Stand - 5 Design

Phone Cases

A simple Ford keychain. I made it rounded all around, making it look like a consumer finished version of what i would buy.Easy to change colors and very easy to print. Check my <a target="_blank" href="https://makerworld.com/en/u/2480982743" rel="nofollow noopener">other models</a> too if you liked this one.

Rounded Ford Keychain

Keychains

This is my take on Hueforge. First model published here since i don't want to clutter Makerworld with more of the same.Since i didn't find any model like this one, i made one myself, without any background, to see the effect.&nbsp;Swap Instructions: -Start with Black -At layer #5 (0.84mm) swap to Blue -At layer #6 (1mm) swap to Orange -At layer #8 (1.32mm) swap to White for the rest.&nbsp;Filaments Used for this one: PLA Generic Black PLA Generic Blue PLA BambuLab Basic Orange PLA Generic White If you like this one, leave a comment and appreciate the print.Check my <a target="_blank" href="https://makerworld.com/en/u/2480982743" rel="nofollow noopener">other models</a> too, if you are interested.

Nissan 240SX Drift Monster

Hueforge

Pennywise, the Rabbit is here for a visit this Easter. Hi Georgie, do you like Balloo… I mean, EGGS?!&nbsp;Easter is around the corner and i am already looking for more simple and fast prints for decoration. Next model on the list is here! Say hello to Pennywise, the Easter Bunny! It prints really fast and problem free, looks good and it fits every corner or on furniture to serve as decoration.  <a target="_blank" href="https://makerworld.com/en/models/247041#profileId-263352" rel="nofollow noopener">If you enjoyed this model, try this one out too</a><figure class="image image_resized" style="width:23.29%;"><a href="https://makerworld.com/en/models/247041#profileId-263352" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/703521/2024-03-14_ed89100db7dce.webp"></a><figcaption>Stitch dressed as Easter bunny</figcaption></figure> You can change the colors as you wish, i tried to make it compatible with only one AMS but i believe more colors would look nicer. If you print it in more colors, please share your print. I would love to see those results.  If you download the separate files and want to resize it for smaller plates, you can. Just resize X and Y axis as you wish and leave Z alone or it won't fit the stand/base and will mess the print quality. The base is one size fits all! If you download my profile and plates, it comes already in a good size and settings applied! “As always, the included base/stand is my universal stand and can be printed as it is or if you want, remove those Top and Bottom Shells and add Honeycomb Infill at 15% for those sweet hexagons”&nbsp;Thank you all for your downloads and i wish you a good and colorful Easter

IT! Pennywise The Easter Rabbit with Stand

Figures with Stand

Another simple and AMS friendly bookmark.  it has been optimized for speed and “poop” efficiency and it only has a few color changes.&nbsp;You can print it with the default 0.2 profile but add 5 bottom and top shells so it doesn't have any infill.The result is what you can see in the pictures and it's perfect.&nbsp;You can change colors as you like, your choice.&nbsp;Thank you for downloading and <a target="_blank" href="https://makerworld.com/en/@Square3D" rel="nofollow noopener">visit my profile</a> for more simple but useful prints.

Chunky Cat Peeking Bookmark

Bookmarks

There are lots of designs like this one and since the picture is available everywhere, i gave it a shot and created a multifunctional print.&nbsp;It can be lighted up inside and be used as a lighbox with some LED's, it can be used just as a standalone decor print since i designed a simple but effective stand builtin the design or it can be used as a box to store you stuff or even just as a gift box since the front plate fits snug into the back box and can be opened as many times as you wish.&nbsp;Since my last design was not that “well received” and many people wrote me about it, even being as a joke print, i added a more serious design to my page. &nbsp;Thank you for your time and i hope you have fun printing it as i did.Happy Valentines!

Valentines Box or Lightbox

Lightboxes

This is one of the several sets of coaster that i have on my profile.It's themed for those, like my husband, who loves drifting, optimized for speed and “poop” waste efficiency. Only 3 or 4 color changes and the result is what is shown in the pictures.A good model if you, like me, like to receive your guests with some themed coasters. You can change the color as you wish. I already printed in many color combinations.&nbsp;Visit my profile for several coasters and the storage for them. If there isn't one coaster that you like there, send me a message and i'll make one for you free of charge.&nbsp;Storage box can be found <a target="_blank" href="https://makerworld.com/en/models/169490#profileId-186104" rel="nofollow noopener">here</a>&nbsp;Thank you for downloading, your support is what keeps me here!&nbsp;&nbsp;*I always get a warning about the possibility of my profile being reversed to the default one if you print with the phone app and because of that i'll post the settings used, in case you need them.<ul><li>0.2 Layer height</li><li>2 Walls/Perimeters</li><li>Arachne wall generator instead of classic</li><li>5 or 6 Bottom shells</li><li>5 or 6 Top shells</li><li>5% infill (there is no infill needed if you apply the top and bottom shells)</li><li>Purge block advised. keeps the colors clean and it's only 2 or 3 grams more.</li></ul>

Drift Lover Coaster

Drink Coasters

Version 3 of this model replacing the Heart with the word &#34;Hallo!&#34; and again with the word “Gude” since it was requested. Plates and profiles are updated. If you want to download file by file, replace the colors with the ones that end with “Hallo” (Ex., Black - Hallo.stl) or only the color name file for the Heart print.&nbsp;For those of you that love Germany or how Germans say it, Deutschland, and for those who just love cute prints.This is part of a collection i will be drawing of many countries with their colors and attributes. Keep looking <a target="_blank" href="https://makerworld.com/en/u/2480982743" rel="nofollow noopener">my profile</a> for the next country.The printed Base is one size fits all for the rest of the models.&nbsp;As always, your support keeps me doing this stuff. Leave a rating and if possible, your print so everyone can see how awesome it turned out.&nbsp;Also check my <a target="_blank" href="https://makerworld.com/en/u/2480982743" rel="nofollow noopener">coasters and coasters storage</a>.