Squancheeb

VanillaWafer

THE LINKEDBIN PROJECT HAS NEW ADDITIONS! CLICK HERE TO SEE THE NEW A1 MINI DRAWER AND XL DRAWERS <a target="_blank" href="https://makerworld.com/en/models/418604#profileId-321159" rel="nofollow noopener">https://makerworld.com/en/models/418604#profileId-321159</a>NO SUPPORTS &amp; PRINTS EACH UNIT FULLY ASSEMBLED!Finally a good simple print in place solution to some desktop drawers. drawers are large enough to fit pretty much all of your 3d printing tools like flush cutters/ deburring tools/ scrapers/ etc.&nbsp;If you are like me then you have drawers but throwing these tiny tools into these massive drawers leads to losing everything, this is my solution to my own headaches and hopefully yours also. These desktop drawers are meant to have a small enough footprint to not impede your space but be large enough to be useful. These use a low material cost dovetail joint to form a user friendly stackable masterpiece of your own creation right on your desk or workshop. TO LOCK TOGETHERSimply just push the stubs that are toward the front of your drawer into the slots then push forward while lining up the stubs in on the back end<img src="https://makerworld.bblmw.com/makerworld/draft/820517/2024-03-28_02856b677ad75.png"><img src="https://makerworld.bblmw.com/makerworld/draft/820517/2024-03-28_7b9cb16c36753.png"><img src="https://makerworld.bblmw.com/makerworld/draft/820517/2024-03-28_0803b2b5bbc0b.png">

LinkedBin - The Print In Place Modular Drawers

tundra3866cda

Fully embossed gun sign on a old cliche gun saying.

AR15 - Not a Gun Sign

Signs

Mako3Design

Nice Harry Potter themed bookmarks!More will be added.Enjoy the reading 😁👌

Harry Potter Bookmarks

Harry Potter

birdhouse8669

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite Pro Cold White Transmission Distance: 0.5Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Lava Red At layer #8 (0.72mm) swap to Savannah Yellow At layer #13 (1.12mm) swap to Cold White for the rest.

Wizard Pikachu Hueforge

Nico91

<h2>Star Wars Logo Lithophane Lightbox.</h2><h2>New version with Color Litho under Raw model files.</h2><h2>Please use my print profile. Otherwise, the model does not have any holes for an LED cable to pass through.</h2><h2>Lightbox size is 240x106.</h2><h2>100% Infill and 0.1mm Layer for the Litho.</h2><h2>I used 1 meter of led wire fairy lights. It is a little more difficult to mount the LED strip. But with a little patience it works :)</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/826394/2024-01-31_131530559a15c8.jpg"></figure>

Star Wars inspired Lithophane Lightbox LED Lamp 

Lithophanes

Athers3d

I use a number of these lower power micro computers, mostly Dell Optiplex 3060 Micro, and wanted a rack that I could stack my nodes. I designed this from scratch to fit these PC&#39;s like a glove, to be secure and not require any tools or screws etc. when assembling, all slots together with ease. I have allowed for space at the rear to allow for cable management.&nbsp;Hope this is of use. &nbsp;I will likely add a design for 4+ pc&#39;s soon.

Dell Optiplex Micro Storage Rack

Dell

Michael Rechtin

&nbsp;Full Build Detailed in Youtube Video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=h6chNEaXb-o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/h6chNEaXb-o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Hardware List: (Affiliate Links) Motors: <a target="_blank" href="https://amzn.to/4c5N0SW" rel="nofollow noopener">https://amzn.to/4c5N0SW</a> Flight Controller: <a target="_blank" href="https://amzn.to/43eu3ZS" rel="nofollow noopener">https://amzn.to/43eu3ZS</a> DJI O3: <a target="_blank" href="https://amzn.to/431EGiR" rel="nofollow noopener">https://amzn.to/431EGiR</a> 2mm Bullet Connector: <a target="_blank" href="https://amzn.to/3In6B3l" rel="nofollow noopener">https://amzn.to/3In6B3l</a> LEDs: <a target="_blank" href="https://amzn.to/3uV63hX" rel="nofollow noopener">https://amzn.to/3uV63hX</a> Props: <a target="_blank" href="https://amzn.to/3IpEkc9" rel="nofollow noopener">https://amzn.to/3IpEkc9</a> 4s 1300mah Batteries: <a target="_blank" href="https://amzn.to/436hHmL" rel="nofollow noopener">https://amzn.to/436hHmL</a> M4x12 Bolt: <a target="_blank" href="https://amzn.to/3T6co23" rel="nofollow noopener">https://amzn.to/3T6co23</a>&nbsp;FPV Equipment (Other products may be able to be substituted): RC Controller: <a target="_blank" href="https://amzn.to/3VbpZYy" rel="nofollow noopener">https://amzn.to/3VbpZYy</a> FPV Goggles: DJI FPV Goggles V2

100MPH FPV Race Quad

Drones

Imaginarydave

<h3>Hey Y&#39;all  If you download my file and have boost tokens I&#39;d really appreciate you throwing one my way.    I built this purely at the request of users of my MMS and it took a lot of time.  Thanks - Dave</h3>&nbsp;This is my attempt at creating a drybox enclosure for the MMS (Manual Material System) I designed. Just in time for Christmas and printed in Christmas colors. Find the original MMS here: <a target="_blank" href="https://makerworld.com/en/models/89050#profileId-95509" rel="nofollow noopener">https://makerworld.com/en/models/89050#profileId-95509</a>&nbsp;Goals:<ol><li>Be an add on to the original MMS (so the MMS is printed separately)</li><li>Allow for adequate desiccant.</li><li>Have an option for people that want to add a hygrometer. (I dont find those little hygrometers that accurate or consistent, but if you want one its there and I set one up)</li><li>be able to see inside (I&#39;d never printed transparent filament)</li><li>Not take up too much room.</li><li>LOOK COOL!!</li></ol>Parts:&nbsp;<ul><li>The original MMS - <a target="_blank" href="https://makerworld.com/en/models/89050#profileId-95509" rel="nofollow noopener">https://makerworld.com/en/models/89050#profileId-95509</a></li><li>Eight M3x4mm socket cap pan head screws and 4 M3 x 6mm socket cap screws. You can never have enough M3 screws around for 3d printing. I used ones from this kit. <a target="_blank" href="https://amzn.to/4awEDik" rel="nofollow noopener">https://amzn.to/4awEDik</a></li><li>Longer M3 screws for attaching the original manifold. I used 16mm ones from this kit. <a target="_blank" href="https://amzn.to/3tu1Qks" rel="nofollow noopener">https://amzn.to/3tu1Qks</a></li><li>M3x4mm heat set threaded inserts. As mentioned in the original MMS project this kit is excellent. <a target="_blank" href="https://amzn.to/4a8hv9L" rel="nofollow noopener">https://amzn.to/4a8hv9L</a> but I also have found this provider on aliexpress where you can really stock up for cheap on commonly used sizes. <a target="_blank" href="https://www.aliexpress.us/item/3256804693330073.html?spm=a2g0o.order_list.order_list_main.5.68e91802d6TXJ1&amp;gatewayAdapt=glo2usa" rel="nofollow noopener">https://www.aliexpress.us/item/3256804693330073.html?spm=a2g0o.order_list.order_list_main.5.68e91802d6TXJ1&amp;gatewayAdapt=glo2usa</a></li><li>Weather sealing - I added weather sealing to seal gap between the rolling lid and the main enclosure. not 100% sure it is necessary or worth the cost but I had it from some speaker builds I have done. I couldnt find the stuff I bought before by ¼ wide 1/16 tall is the size I used. <a target="_blank" href="https://amzn.to/3RE4z2G" rel="nofollow noopener">https://amzn.to/3RE4z2G</a></li></ul>Optional Parts:<ul><li>Sand paper for getting the window clear if you are going to go for transparent. This was my first time trying to “print glass”. I think my print profile is pretty good (with a .6mm nozzle) but will require the normal post processing. I used Bambu Labs transparent PETG. My main interest is woodworking so I have a selection up to a certain point. this <a target="_blank" href="https://amzn.to/3RDCdpo" rel="nofollow noopener">kit </a>would get you through on a fair number of transparent prints, but you will needs to start with 100,150,220 before you get into those. REALLY TAKE YOUR TIME ON THE COURSE GRITS. I quit at 1200 grit and just sprayed it with Deft sanding sealer lacquer <a target="_blank" href="https://amzn.to/41zOcZD" rel="nofollow noopener">https://amzn.to/41zOcZD</a> . Its not the best outcome but it just wasnt that important to me. I&#39;d be curious to see what the great minds on here find for better print profiles.</li><li>Cob LED lights. I already have COB LED lights inside the excellent <a target="_blank" href="https://makerworld.com/en/models/21259#profileId-19505" rel="nofollow noopener">DK Riser </a>so I bought a splitter with wire connectors so I could use the left over LEDs. Here&#39;s the LED&#39;s I used in case you dont have them: <a target="_blank" href="https://amzn.to/48xV1NR" rel="nofollow noopener">https://amzn.to/48xV1NR</a> and the splitter in case you already have some with extra you cut off: <a target="_blank" href="https://amzn.to/48pGx2i" rel="nofollow noopener">https://amzn.to/48pGx2i</a></li><li>Hygrometer: <a target="_blank" href="https://amzn.to/3tuBe2R" rel="nofollow noopener">https://amzn.to/3tuBe2R</a> again I am not convinced these are all that accurate, but here it is.</li><li>reptile heat mat: I am removing the recommendation for this.  I dont think it is worth the added cost and complexity. </li></ul>Instructions:<ul><li>Found in the downloadable PDF</li></ul>&nbsp;I live in a dry enviornment so I didnt really need this for how I use my printer, but people asked and it seemed like a worthy/fun design challenge. I spent probably 25-30 hours on my computer and bought supplies I woulnt have otherwise and quite a few rolls of filament trying to make it work.&nbsp;

Dry box enclsosure for MMS filament roller system

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to BambuLab Green At layer #17 (1.44mm) swap to Jade White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Hogwarts Van Gogh - HueForge

Sculptures

Emvi 3D

180° Print in Place hinges

Hinges

christofer.jh

Warning, don&#39;t leave with load continuously if you print with pla! Go for 3 walls if PLA.My test of 2 walls pla and 1kg load failed after 7 days.&nbsp;🚗 Keep Your Drinks Secure on the Road! 🚗&nbsp;Introducing the Anti-Spill Car Cup Holder – your solution to mess-free driving. With its sleek design and unmatched stability, this 3D printed holder ensures your drinks stay put, even on bumpy rides. Say goodbye to spills and hello to smooth travels with our compact and durable solution.Enjoy every sip, worry-free!&nbsp;Fits a normal fast-food-cup (80mm in diameter).&nbsp;Now four versions!<ul><li>Stand alone (to put on floor mat or seat)</li><li>For hanging on headrest</li><li>Modular (2-any) version!<ul><li>Recommend you use the crossbeams and bolts, but the pins work.</li></ul></li><li>Handlebar version <ul><li>Gimbal is same as the modular but only one fastener point, you can use either</li></ul></li></ul>There is two versions for stand alone and headrest, one stronger thicker and one normal that prints faster.&nbsp;Now with optional handlebar fastener! <ul><li>26mm and 22mm handlebar</li><li>needs m3 bolt and nut x 2</li></ul>&nbsp;There is even an adapter for cans (it fits alla versions)!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429498/design/2024-04-18_19f1767068bc6.jpg"></figure><h2>Assembly of modular version</h2>Follow the image, you cant go wrong. If you want the handle, add it before your put on the gimbals.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429498/design/2024-04-17_ceb648ee7a4be.png"></figure>Why do I call it modular? Well, because you can build it bigger! For example like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429498/design/2024-04-18_43d045b0ad50b.png"></figure>&nbsp;&nbsp;use on your own risk, always drive safe.

Anti spill cup holder

Car Stuff

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

The Smoothy - Y Splitter Connector

angrelou

Hello everyone, thank you so much for the support I received on the previous design.As a token of appreciation and to enhance your set, I created this design featuring Darth Vader&#39;s ship from Star Wars.The ship is designed to be as close to the original as possible.When you paint it, I&#39;ve added an Easter egg (I hope you find it, if not, send me a message).1.- Remember to calibrate the bed before making this design. 2.- It is designed to use a bit of force and not require glue.If you liked the design, check out my profile and subscribe, you won&#39;t regret it.&nbsp;UPDATE 05/11/2024I uploaded a new star wars ship design, which is the tie interceptor TAKE A LOOK <img class="image_resized" style="width: 33.83%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000223450/design/2024-05-11_3d019ad8ab1ff.jpg">&nbsp;

Darth Vader Tie Advanced X1 Kit Card

Kit Cards

wuguigui

Updated20231109Someone suggested designing a new one for the baby, so I made a new one, just scale the length, and now you have a cute version of “Foldable Hanger -print all at once”.<img src="https://makerworld.bblmw.com/makerworld/draft/706607/2023-11-09_e8f52fd9f9808.png"> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&nbsp;Updated20230808The new version 2.0 is coming! wider ends, stronger joints, and hook, several details improvements...There are 2 files, "Foldable Hanger2.0_Tight" is for printers that can achieve high printing speed and high precision(like Bambu lab P1P or X1C, which takes 2 hours to print this hanger with high quality), and "Foldable Hanger2.0_Loose" is for other printers, if you have trouble like stick together when printing the previous file.I suggest using a putty knife to separate the parts, as shown in the image.Thank you again for your "Like", follow me and keep on supporting me! Salute to Makers! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<h2>Summary</h2>It's a Foldable Hanger that can be printed all at once and with no support.Specially designed for travel, very compact and reliable. There are 2 versions, the tight one for high-precision printers and a normal one for others.watch the video for more information: <a target="_blank" href="https://youtu.be/QII3ODl7uRc" rel="nofollow noopener">https://youtu.be/QII3ODl7uRc</a>Click"like" for me if you really like it, it will encourage me to design more new things.See my other designs at: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a>Thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QII3ODl7uRc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QII3ODl7uRc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Foldable Hanger - print all at once

Storage

KYZ Design

This model was originally uploaded <a target="_blank" href="https://www.printables.com/model/452124-under-desk-drawer-with-double-travel-stops" rel="nofollow noopener">here</a>, check out the previous 50+ makes and comments<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_741ebdf3aad638.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_2ef855184807e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_7e7782bb7c62a8.png"></figure>&nbsp;The remix adds built-in travel stops, added “tails” for stability when open, a double depth drawer version and more.&nbsp;Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)

Under Desk Drawer with Double Travel Stops

Drawers

Print Doc

Deep trays and spatulas for mixing epoxy glue. Each tray comes with 2 spatulas.These are printed with tear apart tabs for easy storage. The 6-tray stack fits in a 2x1 unit gridfinity bin.&nbsp;These are designed to be printed on their handles to best utilize space. All the print profiles use “arachne” wall generator. Do NOT use the “classic” wall generator as the thin tear away tabs may not print, the spatulas will fall over and the print will then fail. After slicing you should see little tabs connecting all the trays and spatulas into one unit.&nbsp;If you don&#39;t need the trays you can print the spatulas by themselves:<a target="_blank" href="https://makerworld.com/en/models/491565#profileId-405093" rel="nofollow noopener">https://makerworld.com/en/models/491565#profileId-405093</a>&nbsp;There&#39;s also shallow trays for smaller jobs, the orange ones in the photo below:<a target="_blank" href="https://makerworld.com/en/models/491673#profileId-405212" rel="nofollow noopener">https://makerworld.com/en/models/491673#profileId-405212</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491688/design/2024-06-11_eb6bf934de72e.png"></figure>

Glue spatulas with deep trays for epoxy resin

Tools

DKprints

Maxda Miata parking sign! Some fun garage decor. Can be printed multicolored with an AMS, or paused at a layer height to change filament color with other printers.

Mazda Miata Parking Sign

Miata

潦草小狗爱吃雪糕

This is a mold for making spinning top from PLA filament purge. The tops made with this mold are very colorful and spin well. I printed the mold with PETG at 100% infill and did not need to use supports (PC might work even better).&nbsp;What you will need:<ul><li>An unused oven</li><li>A silicone mat (it&#39;s easier to flip and roll the melted PLA into a ball on a silicone mat than on a metal baking tray)</li><li>PLA filament purge</li><li>A 3M respirator or N95 mask (the fumes from melting PLA in the oven are stronger, so please protect yourself)</li><li>Work gloves</li><li>Tongs</li><li>Pliers</li><li>A digital scale</li></ul>Process：1. Accurately weigh 6g of PLA filament purge and place it in the oven.Preheat the oven to 200-230°C and heat the filament purge for approximately 5 minutes.2. Use tongs and pliers to shape the melted PLA into a ball. Evenly folded patterns will look better.3. Place the shaped plastic into the mold and press the mold firmly.4. After approximately 3 minutes, open the mold and remove the top. If the top is difficult to remove, use pliers to take it out.「Twisting and shaking the mold after it has cooled completely can aid in part release. I recently tried using a mold release agent (spray), and it has been very effective in ensuring smooth part separation.20240512」（translate from Google Gemini）&nbsp;&nbsp;这是一个使用PLA耗材废料制作陀螺的模具，制作出的陀螺颜色比较漂亮，旋转的很好。我用PETG 100%填充来打印模具，无需添加支撑（PC可能效果会更好）。&nbsp;你需要：一个闲置的烤箱，一个硅胶垫（需要把熔化的PLA翻折并团成一团，这在金属烤盘中很难操作），PLA耗材废料，3M防毒面具或N95口罩（在烤箱中熔化PLA产生的气味更大，请做好防护），工作手套，取盘夹，钳子，电子秤。&nbsp;压模步骤：&nbsp;1，将 6g（请准确称重）PLA耗材废料放入烤箱中，200～230℃加热约5分钟（烤箱需预热）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_df4dbe446d418.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_74bd4a7599ef7.jpg">&nbsp;&nbsp;2，用取盘夹和钳子把熔化的PLA团成一团（翻折均匀的纹理会更漂亮）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_31b36cc45d107.jpg"></figure>&nbsp;&nbsp;3，把团好的塑料放入模具中，用力挤压模具。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_75a96c8b0fc52.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_06f1d6fa28797.jpg"></figure>&nbsp;&nbsp;4，大约3分钟以后打开模具取出陀螺。如果脱模困难可以用钳子把陀螺取出。<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_07f0433aa2577.jpg">&nbsp;&nbsp;「充分冷却后扭转并晃动模具将有助于脱模。我最近尝试使用脱模剂（喷雾），它很有效，可以确保顺利脱模。20240512」&nbsp;

Spinning top mold   陀螺模具

Stuff

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012963/design/2023-11-30_237796b35ce0f.jpg"></figure>____________Easy-to-assemble, quick print, kit card of Minecraft Pig in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed. Model comes with breakaway supports.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>

Minecraft-inspired Pig Mini Figure Kit / Keychain

Toys

AFO3D

<h2 style="text-align: center">The smallest mouse you can travel with.</h2><h3 style="text-align: center">Share your prints!!</h3>Assembly steps:&nbsp;You have the bill of materials needed down below.&nbsp;1. Install the laser lens and the switch slider in the right orientation on the base. (Align the slider carefuly with the switch on the PCB)&nbsp;<figure class="image image_resized" style="width: 50.18%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_57d81af77f02f.jpg"></figure>2. Insert the mouse wheel to the PCB and install the PCB (There is centering pins to help you put it in the right position).&nbsp;<figure class="image image_resized" style="width: 50.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_2951dc2453be1.jpg"></figure>&nbsp;3. Install the positive and negative terminals.&nbsp;<figure class="image image_resized" style="width: 50.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_e42fc4c2612c2.jpg"></figure>This should be the end result of the steps above<figure class="image image_resized" style="width: 50.05%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_1e67175661355.jpg"></figure>&nbsp;4. Install the mouse body. Make sure no cables are being crushed.&nbsp;<figure class="image image_resized" style="width: 50.18%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_ad007b6402767.jpg"></figure>&nbsp;5. Put in the AA battery.&nbsp;<figure class="image image_resized" style="width: 50.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_9048403693582.jpg"></figure>&nbsp;6. Install the battery cover and screw all together with only 2 screws<figure class="image image_resized" style="width: 50.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_3f19ab338bc84.jpg"></figure>&nbsp;7. Put the USB in the socket and add the rubber pads to the base ( Unfortunately I don&#39;t have them because I&#39;ve already used them)<figure class="image image_resized" style="width: 63.27%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491370/design/2024-06-11_b820a4ec1dbde.jpg"></figure><h3 style="text-align: center"> </h3><h3 style="text-align: center">THE MAGNETS ARE FOR THE CASE, YOU WILL SEE CLEARLY WHERE THEY GO WHEN PRINTED.</h3>&nbsp;&nbsp;&nbsp;&nbsp;Follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/afo3d/" rel="nofollow noopener">https://www.instagram.com/afo3d/</a>TikTok: <a target="_blank" href="https://www.tiktok.com/@afo3d" rel="nofollow noopener">https://www.tiktok.com/@afo3d</a>Youtube: <a target="_blank" href="https://www.youtube.com/@AFO3D" rel="nofollow noopener">https://www.youtube.com/@AFO3D</a>&nbsp;LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;&nbsp;Reccomended Print Settings:<ul><li>Brim</li><li>0.4mm nozzle</li><li>Some parts require supports</li></ul>&nbsp;-AFO&nbsp;

MINI PORTABLE MOUSE (with case)

RDesigns

The Allround Box V1.5 OUT NOW! <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a>This is the older Version of “The Allround Box”!Please switch to the new one, if you don&#39;t need replacements parts from this site.&nbsp;-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;&nbsp;The box is assembeld with pieces of filament, so screws arn&#39;t needed anymore!&nbsp;If the filament falls out of the hinges, glue the ends a little with super glue.&nbsp;For the sealing, TPU can be used.&nbsp;Attention:Pay attention to the comments in the parametric design in Fusion 360!&nbsp;Release Notes:27.03.2024<ul><li>The V1 avaliable now!<ul><li>Screws are replaced trough small pieces of Filament that perfectly fit in!</li><li>The Design in Fusion 360 is Parametric, most of the dimension can be changed.</li><li>The Latch design stands out with it&#39;s wheels, which lock into place perfectly!</li></ul></li></ul>31.03.2024<ul><li>Update V1.2!<ul><li>Some model issues fixed.</li><li>Better fit for non sealed boxes.</li><li>Filament holes widened</li></ul></li></ul>05.04.2024<ul><li>Update V1.3<ul><li>Some parametric design issues fixed.</li><li>TPU seal geometry more water resistant</li></ul></li></ul>12.06.2024<ul><li>Version 1.5 OUT NOW!</li><li>You can find it here: <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a></li></ul>&nbsp;

PIP