Spike Freeman

Techro3D

Earring organizer | Earring rack | Earring holder&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453430/design/2024-05-04_dad7289a2bbdd.jpg">

Earring organizer | Earring rack | Earring holder

Tiffy's Pretties

djrethyk

a simple outlet plug cover with a basic grippable base

outlet cover with thick base

Utilities

Roland Deschain

My printing profile for Overture PETG on the Bambu Lab X1C that you can use as a starting point. The 3MF includes a filament profile. If you come up with better settings I would love to hear about them in the comments.&nbsp;Warning: If you print a third party profile you may not be getting the latest version or the highest quality print. &nbsp;If you like this project, please don't forget to ❤ Like and ★ Rate!

Overture PETG Filament Profile (Bambu Lab X1C)

Bambu Studio Filament Profiles

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

Foodstuff

tomas.hnyk

JEEP Wheel center cap

JEEP Wheel center cap

Jeep Renegade Trailhawk

Klayton

We wanted to keep our Ikea Akerbar sitting on the window ledge, but the greenhouse was too deep to sit there safely. I designed these to be installed on our window trim to support to avoid any accidents.&nbsp;I designed this with easy screwdriver access in mind. No supports required. Print with the hypotenuse side on the build plate.&nbsp;Could also be utilized for supporting shelving etc.&nbsp;Dimensions: D 3" H 2.25"

Ikea Akerbar Greenhouse Window Ledge Supports

Off-Grid/Sustainability

Wing-Art

Arachnophobia?&nbsp;Spider-Catcher is a must-have for anyone uncomfortable with creepy crawlies, as it effectively captures them from floors, walls, or ceilings, allowing for quick and safe release outdoors.An extension option (for unlimited size) is also available - because size does matter. ;) I recommend printing the pyramid part in transparent PETG, of course you can print it in PLA, too. Usage:Place the Spider-Catch model over the spider and slide the flap on the underside to safely capture the spider.Transport the spider to a desired location and release it there by simply rotating the rod, which opens the flap, allowing for touch-free release. Just show me your Spider Catcher, I would be very happy to see it!___&nbsp;Spinnenangst? Spider-Catcher ist ein Muss für jeden, der sich bei Krabbeltieren unwohl fühlt, da es sie effektiv von Böden, Wänden oder Decken einfängt und eine schnelle und sichere Freisetzung im Freien ermöglicht.Eine Erweiterungsoption (für unbegrenzte Größe) ist ebenfalls verfügbar - denn Größe ist wichtig. ;) Ich empfehle, den Pyramiden Teil in transparentem PETG zu drucken, aber es geht natürlich auch in PLA.&nbsp;Anwendung:Platziere den Spider-Catcher über der Spinne und schiebe die Klappe auf der Unterseite zu, um die Spinne sicher einzufangen.Transportiere die Spinne an einen gewünschten Ort und setze sie dort durch eine einfache Drehbewegung der Stange, welche die Klappe öffnet, berührungslos frei. Zeigt mir eure Spider Catcher, würde mich sehr darüber freuen!

Spider Catcher - Insect Trap Stick

Cleaning

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Screw Gauge by Bambu Lab

Garage/Workshop/Tools

Gridfinity

Doc Laney

This is a well tested spool adapter to allow use of a Protopasta 500G filament reel with a Bambu reusable spool. Changes from previoiusly avaible models are: 1- a “spiky” hub that engages the cardboard spool hub without slipping, 2- a slighly increased inner diameter of the adapter, there is no reason for the adapter to be tight on the Bambu spool--it has to go on easily and engage the notch, 3- an improved profile of the outer rim of the adapter, prevents filament from getting “hung” on the edge. Using this on the 500 G Protopasta spools involves--leaving the plastic wrap on the spool as it comes, carefully prying the cardboard flange off, and carefully cutting the glue off the inside of the hub, best to use a small wood chisel and not a razor to do this. Put the adapter on the Bambu reusable with the notch and insert. Repeat on the other side. Hope this helps.

Protopasta 500 G spool adapter -to use on Bambu reusable spool, one that works

Bambu Lab X1 Carbon/AMS

NicolaiVdS

When milling a very light material, some powder can enter the thiny gaps at the Y switches. Follow the instruction on the wiki to open the electronic side of the machine (disconnect the power cable first), and place the covers as in the pictures.

FABtotum Switch Dust Covers

FABtotum Core

Sebastian_Rubner

<h2>Summary</h2>DE: Um das Drehen der Zahnriemenspanner auf Dauer zu verhindern, habe ich eine passende Halterung entworfen.Update 2023-08-20: Anpassung einiger Maße im X-Bauteil aufgrund von Bruchgefahr Update 2023-09-04: Anpassung einiger Maße im Y-Bauteil aufgrund von sehr engen Spaltmaße + Rundungen für das X-Bauteil Update 2023-11-27: Anpassung einiger Maße im Y-Bauteil und im X-Bauteil Hinzugefügt 2023-12-07: Jetzt gibt es auch ein Modell für den Elegoo Neptune 4 MaxEN: To prevent the rotation of the belt tensioners in the long run, I have designed a suitable bracket.Update 2023-08-20: Adjustment of some dimensions in the X-component due to risk of breakage. Update 2023-09-04: Adjustment of some dimensions in the X-component due to very tight tolerances + Curves for the Y-component. Update 2023-11-27: Adjustment of some dimensions in the X-component and Y-component Included 2023-12-07: There is now also a model available for the Elegoo Neptune 4 Max.<h2>Print Settings</h2>Printer Brand: ELEGOO                                            Printer:                      ELEGOO NEPTUNE 3 Pro&nbsp;Rafts: Doesn't Matter                                            Supports:                      No&nbsp;Resolution: 0.2                                            Infill:                      15%-40%&nbsp; Filament: PLA / PETG

Elegoo neptune 3 / 4 / 4 Pro / 4 Max belt tension stopper

Elegoo Neptune 4 Max

AnyCubic Photon M3 Max/Wash&Cure

kurticus

A magnetic K Cup holder that can be attached to any magnetic surface most likely the side of a fridge which is where mine is currently located. They can be stacked on top of each other and will attach with magnets. I have updated the design with version 2.0 that includes friction fit magnet holes, plus 2 additional posts for the magnets for improved attraction to the metal surface.&nbsp;Version 2.0For version 2.0, the magnet holes are specific for 10mm x 3mm magnets. The magnets fit into the holes tight so no glue should be needed. If you would like to glue the magnets I would recommend using E6000 glue to hold my magnets. These were the specific magnets that I purchased:<a target="_blank" href="https://www.amazon.com/dp/B09TPJ5FV2?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B09TPJ5FV2?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;Version 1.0The spacing between the magnet stands and the backing is 3mm. The round place holders are 18.5mm round. The specific magnets I used are 18mm x 3mm which can be purchased here:<a target="_blank" href="https://www.amazon.com/dp/B0BDFFCSKT?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B0BDFFCSKT?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>The magnets overhang a little bit on the stands, but hold the model just fine.This is meant to be printed with the front face down without supports. I printed this with a .6 mm nozzle with .3mm layer height in Matte PLA.

K Cup Modular Magnetic Holder

Kitchen/Dining Room

TurtleTech Creations

Soap dispenser bottle designed to work with disposable Dr. Bronner's dispensers. Designed to get every last drop from the bottom and also easy to print with internal angles. It is also threadless which I find more convenient and durable for a 3D printed part&nbsp;Note: you may have to trim some of the tubing on the dispenser so it fits properly

Simple Soap Dispenser Bottle

Bathroom

Hrco69

High detail, Jesus wall art, simple to print you can scale it and there is included print profile. Behind is mounting hole for wall.

Jesus home decor With Wall Mount

Living Room

Liam's Room

Nial's Room

Bedroom

nico_broeder

A stand for Tseriact filament welding tongs makes work easier by clamping the two ends. &nbsp;Additional parts to purchase: 2 x M3 Rutex melt nut 2x M3 screw 12mm

Filament Connector Stand

Plastic Recycling

JonnayLin

When you want to use a Fine Point or Ultra Fine Point Sharpie with your Cricut instead of the proprietary pens.

Cricut Sharpie Adapter

Cricut Maker 3

braga3dprint

The 3D model of a lightbox featuring the Coca-Cola logo is a refreshing and iconic addition to any space. The classic Coca-Cola script and logo are meticulously recreated in this design, making it a captivating piece of decor. The lightbox, when illuminated, radiates the same warmth and positivity that a cold Coca-Cola can bring. Embrace the nostalgia and joy associated with Coca-Cola with this delightful lightbox. 🥤❤️🌟 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Coca-Cola Logo Lightbox LED Lamp

Nial's Olde Dublin Pub

jakobgeltinger

Mount for the xTool m1 plotter kniveI used 13mm doublesided tape to attach it to my xtool

xTool m1 Plotter Mount

xTool M1

ValdiLab

Remixed from @<a target="_blank" href="https://www.printables.com/it/@AndrewRoth_245440" rel="nofollow noopener">Andrew Roth</a> “Dual Spool Cord Wrap” (link: <a target="_blank" href="https://www.printables.com/it/model/457461-dual-spool-cord-wrap" rel="nofollow noopener">https://www.printables.com/it/model/457461-dual-spool-cord-wrap</a> ), I found it to be a bit too taller for my uses, so I adapted to use a lower screw

Recycle Filament Spools - Dual Spool Cord Wrap

Yard/Garden/Pool/Patio

KYZ Design

This model was originally uploaded <a target="_blank" href="https://www.printables.com/model/452124-under-desk-drawer-with-double-travel-stops" rel="nofollow noopener">here</a>, check out the previous 50+ makes and comments<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_741ebdf3aad638.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_2ef855184807e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194310/2023-11-22_7e7782bb7c62a8.png"></figure>&nbsp;The remix adds built-in travel stops, added “tails” for stability when open, a double depth drawer version and more.&nbsp;Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)

Under Desk Drawer with Double Travel Stops

MakerSpace

Good Day Designs

Hey everyone!I just started getting into electronics and design after a bit of 3D printing. This is my first official project with proper documentation, measurements, and testing around a Raspberry Pi. The design is purposeful where the SSDs stick out and with cables going around, wrapped in a cable sleeve for an interesting look. The OLED helps to monitor the device and to check ip.Updates:<ul><li>9/22/2023: Initial release</li></ul>Parts used:<ul><li>1x Raspberry Pi 4B 2gb</li><li>1x OLED 0.96 i2c display module</li><li>Required cables (ethernet, power cable, etc.)</li><li>1x 60mm 5v USB fan</li><li>2x USB to SATA cable</li><li>2x SSD 2.5"</li><li>2x M3 14mm-16mm screw</li><li>23x M3 6mm screw</li><li>25x M3 4mm screw</li><li>2x M3 nut</li></ul><a target="_blank" href="https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1" rel="nofollow noopener">https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1</a>All up to you but this is how I printed mine:<ul><li>Printer: Bambu Lab P1P & Elegoo Neptune 3 Plus - for the inner panels</li><li>Some adjustments have to be made in terms of the base</li><li>Walls: 4</li><li>Top/bottom: 4</li><li>Nozzle: 4mm</li><li>Layer height: 0.16mm</li><li>Infill: 15-20% - any pattern</li><li>Supports: ON for outer panels - tree</li><li>Brim: ON for outer panels</li></ul>Here are some assemblies to help install and notes:<ul><li>SSD side bracket is to be mounted inside, keeping the 2 SSDs in place</li><li>60mm USB fan apparently can't be controlled so I'd recommend an adapter with a physical knob attached</li><li>There are 3 versions of Front Panel Outer for OLED, no OLED, and additional airflow.</li><li>SSD top panel bracket only needs 2 screws for SSD on the top as it's stable enough</li></ul><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_f2d7f21300bcb.png"></figure><figure class="image image_resized" style="width:52.41%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_d87cad8bcc57c.png"></figure><figure class="image image_resized" style="width:52.2%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_3c89542c443da.png"></figure>Please leave any comments/feedback as they would be greatly appreciated!

Raspberry Pi NAS Enclosure - Dual SSD 2.5"

Network/Comms

Dr.Mussy

<div><h1>Summary</h1><div><h3>Don't forget to "Click A Like" & check out my other Cool designs and Follow my Weekly dose of KooKoo uploads ;)</h3>I was working on something else and then I stumbled on this Cool Fishing Idea, The pocket Fishing Ring is Small, Handy, and just Fun ;)BOM: M3 x 40mm L (spool) M3 x 16mm L (handle) M3 Lock Hex Nut (lock) 3mm ID x 6mm OD O-Ring (spool)If you are interested in other prop firearms, Airsoft parts and designs do join our group on Matrix: <a href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.</div></div>

Pocket Fishing Ring

FiTac

Makers Mashup

This is a complete ON AIR sign that uses a simple USB powered LED strip to light. It prints without supports and only minimal infill is required. Perfect for studio recording. #JuneTunes&nbsp;Includes the ON AIR faceplate and a blank one so you can make your own. Just recess the text 1.5-2mm deep. Deeper will make the words brighter.&nbsp;The face plates are completely interchangeable. The LED carriage presses the face plate forward to keep it in place. Use a short LED strip and cut to length. <a target="_blank" href="https://amzn.to/3PtgL7g" rel="nofollow noopener">https://amzn.to/3PtgL7g</a> is one suggestion.&nbsp;Color effects can be accomplished without a multi-material printer. Once the face plate is printed past the bottom of the letters, swap to a solid color to achieve the effect shown. &nbsp;Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!Consider dropping a tip <a target="_blank" href="https://koji.to/k/8E9J" rel="nofollow noopener">https://koji.to/k/8E9J</a> or consider supporting my ongoing work <a target="_blank" href="https://www.patreon.com/makersmashup" rel="nofollow noopener">https://www.patreon.com/makersmashup</a> Purchase anything on amazon after visiting our store page <a target="_blank" href="https://amzn.to/429HusI." rel="nofollow noopener">https://amzn.to/429HusI.</a> Just click this link first!&nbsp;No cost option to support my work?&nbsp;- Subscribe to the YT channel - Follow me on Thangs.com - Watch videos on the channel! - Share any of the videos on social media! - Share my models with friends and family!

Lighted Text Box - ON AIR - Changeable Face Plates

Home Studio

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

Honeycomb Storage Wall

Whopper Printing

This design prints with NO support material and requires NO assembly. Print with the cab side DOWN. This is a great model to test your overhangs and tolerances. The tolerances are 0.3 mm.Be sure to download <a target="_blank" href="https://makerworld.com/en/models/13070?profileId=13070" rel="nofollow noopener">the excavator</a> that goes with it!&nbsp;If you would like to support me, consider these options:&nbsp;Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>