Susan

Zzz3DSelkirk

Cord on the floor all the time! Tried another hair straightener wall mounted holder and it just wasn&#39;t robust enough for my liking so I design another. This one is clean and built to last. Printed in granite flavored PETG. Thanks for looking.

Hair Straightener Wall Mount - Robust

organization 

hsispeg

Universal seat belt buckle silencer / muter / plug (or however you name it). With “attention” sign so you don&#39;t forget to take it out when the seat is occupied.

Universal seat belt buckle silencer / muter 

marcusmxk

These tiny ampoules are very difficult to both hold and draw from at the same time. They can stand on their own but just barely and tips over at the slightest touch.This ampoule holder gives it the stability to stand easily and be handled much safer.Prints very quickly and consumes little material.

Ampoule Holder - 1ml diameter 11mm

medical 

Marc Elbichon

🐈🐭 There are other variants, checkout <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/528929" rel="nofollow noopener">the entire collection</a>!🎅🦹♀️🧛🧝 Other characters in <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/594647" rel="nofollow noopener">this collection</a> !&nbsp;Update 2024-02-02: V2 - Redraw from scratch, scale up a little bit Jerry for better details, separate stl files&nbsp;I like the original model but add some issues with it, I rework the stl splitting and painting for better result.&nbsp;Simply print and put at a bottom of a wall, shelf, etc.. with a piece of double sided tape

Tom and Jerry Decorative Wall Hole

decor 

RobJD3

I looked for Hello Kitty money boxes on Makers World but couldn&#39;t find any, however there were some cool light boxes that inspired me.&nbsp;I designed this from scratch as a money box. &nbsp;No need for supports as I built some into the design and they snap off rather satisfyingly once printed (in the coin/note slot).&nbsp;Prints in 3 bits:<ol><li>The main box face down (painted).</li><li>A back, face down so you get a nice build plate texture. This needs to be superglued onto the main box, but I designed a raised lip to make locating it easy.</li><li>A Hello Kitty inspired flower plug.</li></ol>&nbsp;The flower screws into the opening at the back so you can access the funds in the box.

Hello Kitty Money Box

hello kitty 

Rockman

Halloween Cute Ghost&nbsp;Wanna sell my Printed models? Just give me a boost and you can legally sell the model you boosted!

Halloween Cute Ghost

Halloween 

Williams Industries

This is a starter pack to the Christmas Theme that we will be doing over the next several weeks. In total, the goal is to have over 100 Christmas files. Join the patreon below for full access and commercial rights.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

Christmas Vacation Coaster & Wall Art

christmas

JDJDJD

<h3>Meet the ProClip!</h3>The ProClip Filament Clip is a pleasure to use and easy to print.&nbsp;ProClip has a built-in handle that works in coordination with a clamping tunnel to manage and secure your filament.<h3>NEW! ProClip V2 features:</h3><ul><li>A extra durable clamp inside the tunnel.</li><li>Symmetrical input holes work for right handed and left handed users.</li><li>Handle flange provides good control and a comfortable grip.</li><li>A Low Profile option designed for tight storage containers.</li></ul>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000030298/design/2023-09-30_0e45d041d5e2.gif"></figure>&nbsp;<h3>BENEFITS:</h3><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Designed for FDM Printing</li><li>Free to Download!</li></ul><h3> </h3><h3>UPDATES:</h3><ul><li>10/06/23 ProClip V2 Released</li></ul>&nbsp;<h3>TIPS:</h3><ul><li>MUST be printed on side</li><li>Printer tolerances vary. If your ProClip is running tight just slide a piece of filament back and forth to break it in a little bit.</li><li>Glue stick can help condition the print bed for proper adhesion/release and is recommended.</li></ul>&nbsp;<h3>NOTES:</h3><ul><li>ProClip can be used commercially, but can’t be resold.</li></ul>&nbsp;<h3>TESTED PRINT DETAILS:</h3>ProClip has been built around the following conditions.<ul><li>Glue Stick: Yes (without is at your own risk)</li><li>Support: Disabled</li><li>Walls: 2</li><li>Brims: No</li><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Infill: 15% Gyriod</li></ul>

ProClip Filament Clip

Bambu Supplies

xxLASWSxx

Pitbull Art Decor Plus Stand

animals 

ProjectFilament

This is our Voronoi Style Universal Phone Stand. You can also find the assorted smartwatch charger stand on our profile!&nbsp;There are 2 files, a big stand and a small stand, pick the one that suits your needssmall: 98x106x69 mmlarge: 112x121x80 mm&nbsp;My designs are protected by Copyright Law. When you download, you do not have the right to sell any digital file or printed model of my designs. To legally sell printed models, you may obtain my permission by signing up to my Patreon through this link:<a target="_blank" href="https://www.patreon.com/ProjectFilament" rel="nofollow noopener">patreon.com/ProjectFilament</a>&nbsp;Stay connected with me on TikTok and Instagram at @projectfilament Print away!&nbsp;

Universal Phone Stand Voronoi Style, Holder,Office

phone 

darvil66

STAR WARS YODA bookmark Marcador libros STAR WARS YODA

STAR WARS YODA bookmark Marcador libros StarWars

bookmark 

GlennovitS 3D

Helping people to take their medication - that is a cause close to my heart! (Wanna know why? - read further down..) And way too often it's only associated with negative thougths.. So here is an attempt of a pill storage box that brings a smile. Combine color and face to your liking.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/497903/2024-02-05_6682e6f5401f5.jpeg"></figure><h2>Overview</h2>The pill box comes in different versions - with different faces.<ul><li>Happy</li><li>Happy 2</li><li>Wink</li><li>Kiss</li><li>Sad</li><li>Mad</li><li>Pain</li></ul>These are not initially meant to organize pills by the day - but great to have some backup medication in the bag, car or drawer - in case you forgot to take the meds in the morning. But if you do like them, you could print 7 of them ;-) <h2>Assembly</h2><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/497903/2024-02-05_78a2a8ed0caef8.jpeg"></figure>Nothing to do here - just print and screw them together!If the brim doesn’t come of clean, consider using a deburring tool to trim the edges.<h2>Fun fact</h2>Completely by accident - but they fit perfectly in my Gridfinity Trays - if you want 1 or more stored in your desktop Gridfinity system.<a target="_blank" href="https://makerworld.com/en/models/147393#profileId-160852" rel="nofollow noopener">https://makerworld.com/en/models/147393#profileId-160852</a><h2>Print instructions</h2>This is pretty simple, but here is a few tips:<ul><li>Supports: No</li><li>Infill: 10% Lightning (to save filament)</li><li>Orientation: The models are oriented in the correct print position</li><li>Colors: 1 or more (can be printed in a single color, or you can color fx. the top/bottom or face-elements within the slicer)</li></ul>Happy printing!<h2>Why this means a lot to me!</h2>I personally live with epilepsy, and just within the last month, I forgot my medication once. Result: I had an epileptic seizure in front of my family. It’s horrifying to wake up after about an hour, not knowing what just happened. No warnings before, no idea what went wrong. But on the other side, it’s not at all fun to be the family either - a wife who knows what’s happening and needs to explain that to 2 + 5 year old kids, seeing their dad lying on the floor shaking. So when I saw the contest for pill organizers, I knew I had to do at least one design! If my design can just help 1 other person, I would be so happy!<h2>Want to show your support?</h2>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!<h3><a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a></h3>

Kawaii Pill Box (cute faces to your storage)

comedy 

MFDesigns3D

KC Chiefs Lightbox for the superfans!

KC Chiefs LED Lightbox

light boxes 

If printing as a sign, it can be used with my desk buddy stand <a target="_blank" href="https://makerworld.com/en/models/80177#profileId-178576" rel="nofollow noopener">HERE</a> Or, you can use <a target="_blank" href="https://amzn.to/49nkrP3" rel="nofollow noopener">THIS</a> to adhere to your walls. (affiliate link). This print also stands on its own.&nbsp;For personal use, commercial use in the Patreon below.&nbsp;Check out our other Father&#39;s Day Prints  <figure class="image image_resized" style="width: 81.29%"><a href="https://makerworld.com/@WilliamsIndustr/collections/1367348" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480619/design/2024-05-31_3b9ba1ec9b09b.jpg"></a></figure>&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480619/design/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;

Best Dad in the Galaxy

gifts 

3D design shop

Introducing the latest update of my Flexi Baby Dragon ! ✨ In this enhanced version, I've added extra functionality compared to the previous one. This little dragon can move more, has more details, and its hindquarters have been shortened, allowing you to perch on it. Excitingly, it now also features movable wings for an even more dynamic experience!Take a closer look, and you'll discover that the arms, legs, and wings can move individually, adding an extra level of realism. I've also made it slightly smaller, but you can adjust the size—just be cautious not to make it too small, so the movement remains smooth.So here's this upgraded dragon, ready to impress with play, where more details make a big difference! 🌟🔧

Flexi Baby dragon.v2.0 update new stronger wings multi color

dragons 

Eleazar 3DinPlastic

Maker World does not allow you to upload a 3mf with custom Gcode, in the fifth image you can see the command that you must use for temperature changes, it is added in the right bar as custom G-code: “M104 S[Target temperature]”&nbsp;Customised layered G-Code: - layer 44: M104 S225 - layer 84: M104 S220 - layer 124: M104 S215 - layer 164: M104 S210 - layer 204: M104 S205 - layer 244: M104 S200 - layer 284: M104 S195 - layer 324: M104 S190&nbsp;In this image you can see how to enter the custom Gcodes to set the printing temperature manually, you must also choose the maximum temperature as the printing temperature in the profile of your filament.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862671/2024-03-11_88f8890a06961.webp"></figure>&nbsp;&nbsp;Towe Temp for PLA 230-190ºCTower Temp for ABS 270-230ºCTower Temp for PETG 250-220ºC&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56371#profileId-57990" rel="nofollow noopener">If your tower has a lot of threads between the cones, you can try printing this design and calibrate your retractions, I hope it helps!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862671/2024-03-11_f215cb148d647.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/240794#profileId-256732" rel="nofollow noopener">NEW MODEL AVAILABLE</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/862671/2024-03-11_c42e9c53b8b2a.png"></figure>&nbsp;&nbsp;&nbsp;

Tower Temp / Temperature Tower Test -PLA-ABS-PETG

Callibration

Eternity Labs

Model No.1 in a series of screw top pots.&nbsp;The Pot closes in 1 and ⅓ turns, and is 80x80mm.&nbsp;80x55mm - SMALL - <a target="_blank" href="https://makerworld.com/en/models/478915#profileId-390187" rel="nofollow noopener">https://makerworld.com/en/models/478915#profileId-390187</a> 80x105mm - LARGE - <a target="_blank" href="https://makerworld.com/en/models/478923#profileId-390195" rel="nofollow noopener">https://makerworld.com/en/models/478923#profileId-390195</a> &nbsp;I will be releasing different sizes of the next few days.&nbsp;Model No.2:&nbsp;Model No.3:&nbsp;This design requires no supports, just use the profile I have provided.&nbsp;Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a target="_blank" href="https://www.patreon.com/Eternity3D" rel="nofollow noopener">https://www.patreon.com/Eternity3D</a> - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

Screw Top Container - No.1 - 80x80mm

kitchen

NUKDDD

This little sh!t is just happy to see you. Commercial rights available @ https://www.patreon.com/NUKDDD&nbsp;Unleash your AMS, 16 multicolor spinners in 16 hours! Filament purged to infill, so it does contain filament purge, it’s built in! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849440/2024-04-09_c5c5dae74f89b.jpeg"><figcaption>Purge to infill</figcaption></figure>As you can probably tell, this model is all about spinning sh!t 💩&nbsp;Print in place, no support needed, multicolor AMS print with 4 colors.&nbsp;Filaments used: <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Bambu PLA Basic</a> brown, black, red and white&nbsp;Ever wanted strangers to see you holding a piece of sh!t go “AWW😍that&#39;s so CUTE!”?&nbsp;What is it? It&#39;s just some silly 💩 printing this will yield 2 types of poop, some happy ones and some others you can use with models in the “poop” contest.&nbsp;Want to give a sh!t? Show your friends and family that you do and print a whole bed of sh!t and gift one to each of them! Print 16 cutest pieces of little sh!ts around, only makes around 19g of the kind of poop you don&#39;t want with my print profile. Paid for the whole plate, use the whole plate!&nbsp;How do I spin it? Like you would with any other piece of sh!t, pinch the top and bottom of it with your index and thumb like you don&#39;t want to touch it (although all you want to do is hold it close to your face and cuddle kiss it), then gently spin it forwards or backwards with your fingers on your other hand (you may have to lick your fingers if they&#39;re too dry and that sh!t be stubborn) and enjoy the swirl.&nbsp;Does it spin like sh!t? You bet!&nbsp;Why should I give a sh!t? For the lolz 🤣.&nbsp;Don&#39;t forget to spin that sh!t, give a sh!t by leaving a rating and show me what you do with your 💩!

Happy Poop Spinner

fidgets 

IXPatch

This is a tiny folding chair. It prints in place, no supports or assembly required. When unfolded, it stands approximately 8.5cm (~3.3") tall. Enjoy :)

Tiny Folding Chair (print-in-place)

office swag 

Kit Crafters

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_f1453f4ce4fc8.png"></figure>&nbsp;ORIAS is the first of my series of mecha model kits. Equipped with 2 long range artillery systems as the arms, ORIAS is a mecha combat suit with 8 articulation points that are fully posable. AMS is not required; each part is printed independently without supports.&nbsp;No need for PETG, all the prototyping and model images were printed with PLA.&nbsp;The provided profiles are:<ul><li>A1 mini<ul><li>Single Color</li><li>Three Color Scheme</li></ul></li><li>A1/X1/P1<ul><li>Single Color</li><li>Three Color Scheme</li></ul></li></ul><h4>Other Mechas in the Series:</h4><ul><li>[Belial](https://makerworld.com/en/models/224105#profileId-242085)</li><li>[Morax](https://makerworld.com/en/models/185322#profileId-204029)</li></ul><h3>Assembly Instructions:</h3>Parts:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_87c93e2bf1322.jpg"></figure>&nbsp;Body:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_04f9cba5ce1c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_d6bc499b21374.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_861a5264d1055.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_eecf05a7c0a76.jpg"></figure>Arms:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_1ab2cd439110b.jpg"></figure>&nbsp;Legs:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_0d936e3987f46.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_6425f8ebd42aa.jpg"></figure>Final Assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_310812c7bf527.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_6c9b71d73f285.jpg"></figure>

ORIAS - Combat Mecha

Michael

Adam L

I hope folks enjoy this useful desktop card holder with voronoi pattern punch-out, good for business and/or gift/credit cards. Personally, I have a lot of extra standard wallet-sized cards laying around for various different reasons (gift cards, loyalty cards, etc), and this is a great place for me to keep them handy instead of spread everywhere.&nbsp;This model is a great option for Embossing text or a pattern on the top or sides of the base for easy customization, and i've made these areas sizable enough to make this easy to do with slicer tools, no re-modeling required!&nbsp;Shown here in gold filament in render, and Prusament Mystic Brown (purple) PLA in the print, at 0.16 layer height on my Bambu X1C.&nbsp;&nbsp;&nbsp;While this is remodeled and significantly different, I should give credit to the folks over <a target="_blank" href="https://www.printables.com/model/557413-business-card-holder" rel="nofollow noopener">here </a>and <a target="_blank" href="https://www.printables.com/model/360735-business-card-holder-45deg" rel="nofollow noopener">here </a>for the idea.

Voronoi Business Card Holder 

office

mafakasit

coaster holder for chiefs coasters by spondoro <a target="_blank" href="https://www.thingiverse.com/thing:571492" rel="nofollow noopener">https://www.thingiverse.com/thing:571492</a>

kansas city chiefs coaster holder

coasters

vit.budina

This model of the iconic Bronco has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate.&nbsp;The only thing you have to do after printing is to snip off a few tiny pillars that prevent the axle casings from fusing with the wheel axles during printing and you are ready to conquer the badlands!&nbsp;This model is best printed at 100% scale, however, anything down to 60% scale works just fine. &nbsp;Despite the limitations of designing a vehicle with interior and working suspension and wheel mechanisms, I was able to preserve all the differentiating and iconic features of the vehicle. Some long bridges could become a problem if you decide to scale the model up, but otherwise, it's a pretty easy model to print. However, if you have issues printing any of my designs, DM me on Instagram (https://www.instagram.com/vit.budina/) and I will send you my Cura profile.&nbsp;Enjoy! :D&nbsp;Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.

Print-in-Place Ford Bronco 2021

Bronco 

KC Customs

Kansas City Chiefs Helmet &nbsp;Feel free to scale to whatever size you want. Currently at 30%. Smaller scales might need a 0.2 nozzle or adjust layer heights for the logo.