SpacemanSpiff

CYBR3D

I designed this container from scratch to be a bit evil. 😈 This cache can be setup as a multi or traditional. In the top screw you can put a message in that says this is a decoy, the real geocache is close by, keep looking. While the small screw in the base really houses the log, slotted screw driver needed to take out. I would suggest you add, special tools needed. I added a slot close to the top for a ziptie and one spot of it has a small perpendicuar slot for the attaching ziptie so it doesn't get cut tightening up. I also added a profile for a gasket to keep it dry made out of TPU, use a drop or two of glue to keep it in place, on the screw top side, note: It will be a little offset due to the threads. I'd love to hear about your logs with this container, send me GC, THX. Cache On!

Evil decoy Geocache multi/traditional

Geocache

3D Endeavors

Swap Instructions: Start with Charcoal Black At layer #5 (0.4mm) swap to Red At layer #8 (0.52mm) swap to Ash Gray At layer #14 (0.76mm) swap to White for the rest.

Hueforge Death Trooper

Hueforge

dubmehard

Hello,&nbsp;element of surprise sign - revised version.&nbsp;Thanks for your download, enjoy the print!

Element of surprise sign - reissue

.2 Nozzle

ImpacterDIY

Venetian mask, perfect for a masquerade ball :)

Venetian Mask 

Masks

Comi

<h3>How to print</h3><ul><li>Use supports as shown (painted supports)</li><li>0,2mm layer height</li><li>PLA (for better shape quality)</li><li>15% infill</li></ul><figure class="image image_resized" style="width:38.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/283796/2023-11-30_une8qn9m0tpi.jpg"></figure>

HexHolder for business cards!

Needs Profile

TripleGWorkshop

UPDATED WITH NEW BOTTOM PIECE 12-16-22No more scaling! New bases added.I've been told each side is beautiful and useful on it's own. I mostly want options to print multi-color on my single-color MK3s. Don't push together too hard or parts may stick out.

Interlocking Xmas Tree 2-piece

decor

FunkyArt

<h2><img src="https://makerworld.bblmw.com/makerworld/user/2138172021/draft/2023-09-23_0d058b6439f628.gif">Summary</h2>A motorized turntable for various applications, like 360° videos,… super easy to assemble (only 3 parts) and perfect for a first small electronics project. .After uploading a small washing machine, I realized that I didn't have any good photos or videos of it in its finished state. So I tried to take some photos and, being a pragmatic person, I built a small turntable to take 360° videos. I still had the parts from the mini washing machine ( <a href="/thing:6147167" rel="nofollow">https://www.thingiverse.com/thing:6147167</a> ), so this turntable uses the same parts. (If you buy them for this rotary plate, you can use them also for the washing machine and vice versa).The platter works quite well, but is certainly not perfect yet, so there is a chance that I will tweak it here and there.You need:5 x (688ZZ) Ball-bearings : <a target="_blank" href="https://s.click.aliexpress.com/e/_DeYwlFN" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DeYwlFN</a>What you need to make it motorized:1 x Motor : <a target="_blank" href="https://s.click.aliexpress.com/e/_DlR1NNv" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DlR1NNv</a>1 x Powerswitch : <a target="_blank" href="https://s.click.aliexpress.com/e/_DnL3Rax" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DnL3Rax</a>1x 2Slot Batterieholder : <a target="_blank" href="https://s.click.aliexpress.com/e/_DDAHg4x" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DDAHg4x</a>1 x Potentiometer : <a target="_blank" href="https://s.click.aliexpress.com/e/_DmtLP1t" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DmtLP1t</a>1 x Rubberband with the right strength (40-50), like : <a target="_blank" href="https://s.click.aliexpress.com/e/_DDvOxlv" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DDvOxlv</a>Tools:Soldering iron ( like : <a target="_blank" href="https://s.click.aliexpress.com/e/_DClaicF" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DClaicF</a> )An hotglue pistol with some hotglue ( like : <a target="_blank" href="https://s.click.aliexpress.com/e/_DCyS44j" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DCyS44j</a> )No screws needed for assembling<h2> </h2>&nbsp;

Simple 360° Rotary plate (optional motorized)

Utility

Sevro

Overview and goals Flying pegasus is my most sophisticated glider so far. In this project I continue my experiments with single layer wings and stretch this concept to the edge. My goal was to create glider that have build in anhedral angle of the wing without no need to bend them. I achieved that by separated model into part that have to be glued together after print. After seven prototypes I achived quite good glider with decent charasterictic of flights.Assembly After print, first glue together body and then glue wings and tail. I used cyanoacrylate glue (super glue) and bond is very strong. In no one printed version I haven't had no issue with glued part. They kept together even after hard crashes.<figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/096f5939-4904-4d36-ae40-f2045c470611/assem.gif"></figure>Flight To fly, just throw glider like paper plane. You can adjust tail by bending it up a little. <figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/7e70cc47-3bc8-47d8-8423-abcb39ae22d7/tail.gif"></figure>Balance Different materials have different density so I don't wanted to overdo it with balast of the head. I left there some underweight to calibrate it by yourself. With normal PLA it should working, alternatively you can add some plasticine (about 1.5 g) to head if you need to. Generally you pegasus should stand on his legs, if head will be to heavy and prevails back legs, then you need to decrease balast of the head like below. Good balance without plasticine for moderate throw<figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/427770/rich_content/c0db615c-fedb-4164-ba73-edd718166885/balans-acceptable.gif"></figure>Maximum balast with plasticine ( in this case 1,5 g) for flight with high force of throw<figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/c89229ee-e354-4c41-a778-b9a0d1b7b81a/balans-maks.gif"></figure>&nbsp;You can also check balance by using “hair” hook on the neck. Balance should be achived on second hook.Without plasticine head and back is quite even. In this state pegasus has good flights with moderate force of throw.<figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/045e77ae-bed5-401b-97e4-d5b6eba7a0b4/balansokup.gif"></figure>&nbsp;With balast the head is a little below back and this is good for flights with high force of throw.<figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/f9dc999a-fbd7-4182-b1bf-63764f3b33bd/balance-maksup.gif"></figure>&nbsp;StandingApart from flight I designed pegasus to be decoration too. You can print it in different colours, using change layer colour option in slicer. YOu can storage it in four different states. 1 Simple standing on his legs 2 Putting its back legs into stand. In this state he looks like it's about to take flight. 3. Standing on its tail, presented wing in all its glory 4 Hung on the hook ( presentend in balance section)<figure class="image image_resized" style="width:455.531px;"><img src="https://media.printables.com/media/prints/427770/rich_content/f040502e-f373-429a-bfa1-bbfa3ff83715/thumbs/cover/800x600/jpg/stand.webp"></figure>&nbsp;FlightsSome examples of flights<figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/dcf03817-7ce7-44f8-a34e-5b4ce714a6cd/flight1.gif"></figure>&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/dedfd98a-ae13-461e-83a1-135e4ddc5406/2.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/427770/rich_content/3ed9fcae-cba4-41ca-a001-83492a2d377c/3.gif"></figure>

Flying Pegasus

toys

AP Engineering

EDIT 26/10/2023: After some feedback, I scaled down the part to 99% and reeinforced the clips by 1.5mm to make the part fit better and have the clips stronger! There's a big gap between the poop chute and the interior volume wall. If you look from the side, you can directly see the electronics, meaning that hot air from the printing volume will go to the electronics and also cooling air from the electronics might easily get to the printing volume. This amazing design will close that air to try and remain both zones more separated!&nbsp;Print this in ABS, ASA or above preferably. PETG might be sufficient, but could warp overtime.&nbsp;For install, slide the seal from top→down instead of snapping in place to avoid breaking the clips!&nbsp;