This year I wanted to bring a bit of sci-fi magic into the holiday season, so I designed a T-65 X-Wing Christmas tree ornament that captures the look and feel of a real 3D-printed miniature starfighter. If you're a fan of classic space-fantasy starships, this is a perfect addition to your holiday setup! The ornament prints as a single piece with a reinforced loop built right behind the astromech position, which helps it hang level and keeps the silhouette looking great when it’s on the tree.

I created this model to be a fun, detailed Christmas decoration that anyone can print without needing complex supports or multi-part assembly. The pose shows Santa sitting comfortably while reading his list, with plenty of nice surface detail in the beard, coat, glasses, and scroll to make it stand out on any holiday display. The model is sized at 99.8 × 150 × 116 mm, making it big enough to look impressive on a table or shelf but still easy to print on most printers.

Hey MakerWorld Community! 🎄 Check out my latest upload: the "First Christmas Nativity Scene" lithophane! It's a beautiful, outwardly curving design, sized at 141mm x 115mm, crafted to capture the classic nativity scene in stunning detail. When the light hits it just right—or you place it in front of a lamp—the scene comes to life!

I designed this Staccato-compatible 2011 magazine extender/basepad to give the mags a stronger grip surface and more positive seating without adding any extra rounds. This basepad is fully capacity-neutral, so it doesn’t change compliance or competition status The extender fits Staccato-pattern double-stack mags and gives you more surface area on the bottom for grabbing, stripping, or seating the magazine, whether you're at the range or doing dry-fire practice.

Get ready for spooky season with this adorable pug-in-a-pumpkin design! Standing 110mm tall, this cute model combines Halloween fun with a playful pug peeking out of a Jack-O’-Lantern. It’s easy to print and perfect for festive décor or as a gift for dog lovers. Recommended settings: 0.2mm layer height, 20–30% infill, and supports for best detail. Print in orange and beige, or paint it for extra charm! Share your prints with #PugInPumpkin — can’t wait to see everyone’s creative versions! 🎃🐶

Just uploaded a set of chamber flags sized for 9 mm handguns — designed to be fast prints, highly visible, and remix-friendly. These are meant for safety and clarification: storage, range checks, training, or gunsmithing where you want an immediate visual confirmation that a chamber is unloaded.

⚡ New Upload! Pikachu on Pokéball ⚡ Just finished this fun print of Pikachu perched on a Pokéball — complete with the classic trainer cap! I designed this to be an easy, support-free print that still looks great in multi-colour. Works beautifully with an AMS setup or filament swaps. If you print one, post a pic in the comments — I’d love to see everyone’s versions (especially with custom colours or shiny variants 👀).

I’ve been experimenting with a Quad Nods design and wanted to share my progress so far. This model is definitely still a work in progress—it’s rough around the edges and not functional but I thought it could serve as a useful starting point for anyone who wants to build on it, remix, or clean it up into a finished design.

Halloween is right around the corner, and I couldn’t resist making this Skull Pumpkin print! 🎃💀 It’s the perfect mix of spooky and fun—half carved pumpkin, half menacing skull. I printed mine at around 150mm tall, and it came out with great detail in the ridges of the pumpkin and the deep contours of the skull.

Just finished designing and printing this dual-headed dragon mug, and I couldn’t be happier with how it turned out! 🐲🔥 The scale pattern on the body combined with the snarling dragon heads makes this one of the most striking prints I’ve worked on. The model stands about 120mm tall but can be scaled to your liking. Printing went smoothly, though it does require supports under the jaws and around the horns for the best results.

Just finished this adorable baby dragon print and I had to share! 🐉✨ Standing at 120mm tall, it came out with super clean details and such a cute expression that makes it hard not to smile back at it. I printed mine in a neutral filament, but this model is perfect for painting if you want to give your dragon some personality imagine fiery reds, shimmering gold, or even a pastel rainbow look. The smooth surfaces make it easy to sand and paint.

Hey makers! I just finished designing a life-size low poly skull that's perfect for displaying hats, berets, beanies, or even headphones. It's got a clean, geometric look with just the right balance of style and function. 🔹 Low poly aesthetic – modern, clean, and easy to print 🔹 True life-size – based on average adult skull dimensions 🔹 Flat crown area – holds hats or caps

I designed a simple base plate extension for the Magpul PMAG 10 GL9. It doesn’t add any rounds—just improves grip for easier mag changes, especially with gloves or under stress. Prints clean with PLA, no supports needed, and fits snugly on the mag. Great little upgrade if you want better handling while staying 100% compliant. Feedback welcome!