Tired of holding the trigger on your ARB tire inflator while airing back up? I designed a quick-flip trigger lock that makes the inflator completely hands-free. It lives on the neck of the inflator - just flip it over the trigger and let your compressor do the work. Prints with ZERO supports! I used Carbon Fiber, but any heat-resistant filament like ASA or PETG works perfectly. Grab the file on my profile and save your hands on the trail. If you print one, let me know what you think!

Just uploaded my Ski Bike Conversion Adapter! Turn your hardtail mountain bike into a fully functional ski bike using cheap kid skis and standard 3/4" hardware from Home Depot. Features oversized pedals for snowboard boots (add metal screws for extra grip) and heavy-duty front and rear mounts. Fully tested on the mountain! Note: Must print in ABS or ASA for strength and cold resistance. Ski at your own risk! Check the link for the files and the full build video.

Finally cleared out my center console "junk drawer" for good! This is V2 of my Hardtop Rail Storage Box for the Jeep JL and 4xe. It mounts using the existing hardtop bolts - no drilling needed.

Sick of your dash cam falling off in the heat or having to move it every time you get a new windshield? I just uploaded a rearview mirror stem mount for the Garmin Dash Cam Mini series. It’s super sturdy, rattle-free, and stays out of your line of sight. Check it out and let me know what vehicle you’re using it on!

This mount brings everything together. The passenger side needed to be just as solid and intentional as the driver side, so version 2.0 got the same scanned-fit treatment. Flush, sturdy, and finally a clean way to integrate a power outlet without wires everywhere.

Version 1 worked - but I knew it could be better. This 2.0 driver dash mount was rebuilt using a scanner to match the dash exactly. It sits flush, doesn’t wiggle, and feels solid in a way the first version never quite achieved. If you want a clean, factory-feeling mount, this is it.

This started as a “why are my sunglasses always sliding somewhere dumb” problem. The RAM ball sunglasses clip keeps them secure, adjustable, and exactly where you want them — no dash clutter, no crushed frames, no rattles.

Duck Duck… Jeep. I wanted a way to display ducks that didn’t feel like an afterthought or a suction-cup compromise. This RAM ball duck mount keeps things modular, solid, and compatible with the rest of the dash ecosystem. Plus - yes - there are versions for one, two, or three ducks because restraint is optional.

The last ski vice you'll ever need! Just released my Ultimate Ski Tuning & Waxing Vice. I designed it after never finding a vice that was the right size or sturdy enough for skis and snowboards. Clamp it to any table, flip your board flat, or slide it sideways for edge work. Stronger than my Burton vices and easy to print in ABS or other sturdy filament.

3D printed divider for HDX yellow-lid storage totes from Home Depot (6.5 Qt & 7 Gal). Slides in and lets lids close fully. Honeycomb saves filament, solid for no passthrough. No supports needed unless splitting for smaller beds. Works great for tools, camping, and garage storage. Versions for more sizes and quad dividers coming soon!

Turn the inside of a cabinet into a pull-out SKÅDIS organizer! This custom hinge setup uses a piece of filament as the hinge pin. Sized for my pantry and print bed, but you can scale height/width as needed. Printed in PLA matte with supports. Includes handle and connectors for joining multiple boards. Flush finish, smooth slide, extra storage unlocked!

Custom GoPro mount for the Leatt Enduro 4.0 helmet. Slides under the visor and secures with two zip ties. No adhesives needed. Low-profile, super sturdy, and keeps the camera centered. Works in vertical or horizontal orientation. Compatible with action cams or lights. Doesn’t interfere with helmet use and fits with or without the chin bar. Printed in ABS; recommend strong filament and supports. Add your own GoPro nut.

Designed these mounting feet to keep my Goal Zero Yeti 1500X from sliding around in the rig. The feet slot into the cutouts with walls that lock it in place, and you can add tie-down straps for extra security. Printed mine in ABS for strength. I also made a version with the back wall removed so the battery can slide in/out where space is tight. Might work for other Goal Zero models too — not tested yet!

3D printed water hose basket & nozzle mount for yard hydrants/stand-alone spigots. Vented bottom & sides for quick drying, rear hose cutouts, side hose mount, and sturdy clamp-on design. Ideal for expanding hoses. Prints in ABS, minimal supports. Requires 2 bolts & 2 nuts (M8 tested). Keeps hoses & nozzles organized, elevated, and off the ground.

Just designed a wall mount for my Peet Boot Dryers I use during ski season to keep it off the floor and save space. Features 3 mounting points for stability, snug fit, vented bottom for heat exhaust, dual cable passthroughs, and an angled design so water drips away. Print in ABS for durability (PETG/PLA works with more walls/infill). Mount with toggle bolts, screws, or anchors. Perfect for ski and snow gear!

Love the Hori Piranha Plant cam but want HD camera quality? This shell fits the Switch 2’s original camera—same fun look, full quality output. Prints in PLA on one plate, uses 4x 8x2mm magnets, with a rear slot for cable access. Beta design—still dialing in print settings. Final version will use red, white & green filament.

wanted quality of the good camera with the look of the piranha plant one. just gotta order the colors now! #Comingsoon #Newmodel #Switch2 #Nintendo

Just dropped a remix of Aykan’s poop bag dispenser 🐶🧻—now with a built-in trash bin, weatherproof lids, and a handy trapdoor for mess-free cleanup! 🪣💨 Added 3M tape pillars so you can stick it right to your fence. Perfect for backyard use—no more carrying bags inside every time! 🙌

Just dropped a remix of Aykan’s poop bag dispenser 🐶🧻—now with a built-in trash bin, weatherproof lids, and a handy trapdoor for mess-free cleanup! 🪣💨 Added 3M tape pillars so you can stick it right to your fence. Perfect for backyard use—no more carrying bags inside every time! 🙌

Is your roof rack Starlink mount blocking your rooftop tent? This custom adapter mounts the popular Trio Flatmount securely to the hood of your Jeep Wrangler JL—no drilling required. Sleek, low-profile, and wind-stable, it’s perfect for digital nomads who want Starlink speeds (150–300mbps) even on the move. Prints on 1 plate, installs cleanly, and includes spares for easy maintenance.