Made to let the air in to the wardrobe...

This is my toilet paper holder. It mounts to a radiator with 2 screws. The center piece consists of 3 parts (inner and outer tube and a spring). BE CAREFUL, THE RADIATOR IN MY APPLICATION HAS 22MM DIAMETER TUBES WITH 17.5MM GAP BETWEEN THEM, SO PLEASE CHECK THE COMPATIBILITY WITH YOUR RADIATOR!!! You're free to modify it for your application, or to contact me to modify it for you :) Any feedback is welcome.

This is a replacement part - Cover for Mass Air Flow Meter (MAF) - 0 280 203 *** (the last 3 digits aren't visible). The MAF is from a 1986 Porsche 911, but I don't find this MAF in the parts list, so I think it was replaced… But as I see on the internet, it was used for Porsches, Jaguars, BMWs and probably some more. I hope this helps anyone. And if anyone knows more info, feel free to share it. Printed from PETG, 0.2mm layer height, no supports needed, 4 walls, 30% infill. Thank you:)

I originally designed this toilet paper holder because our old one broke, and I wanted a functional and simple replacement. However, I've recently upgraded the design by adding a central piece, making it adaptable for everyone—even those who don't have a central mounting system. Feel free to download and modify it to suit your needs. Feedback is always welcome!

Hello, this is Tesla Charger Holder, for EU Tesla Y - 2021. I don't know if there is any difference between chargers… Do basic measurements and check in a 3D software. As you can see mine is ready to be mounted in some cylinders. You can modify that, or ask me to do it and I will do it for you. Important: this was printed with my old printer that I sold 2 years ago, that's why it is so poorly printed. Have fun :)

This is a normal sized Pull Starter Handle with 4mm through hole, that I designed to replace my grandpa's lawn mower's broken handle. Best printed with 100% infill or enough walls to fill the structure up. I hope it will help your applications too:)