Printed a dream and looks so polished. Supports were a little tricky to remove but I believe they're as easy as they can be given the shape of the dragon, and I didn't have anything unintentional come off. Thanks so much for the print!

Printed well, only thing is there's no way to tell how far down to put the pen to print at the correct height

Fits perfect for Cricut Maker 4 and regular Sharpies. Thanks for sharing! Saved me making it myself 😄 Tried the ultrafine sharpie as mentioned in the description but this holder is too large for it. The description makes it seem like there should be 3 prints, one for each of the pens described, but only one profile is available in this print (EDIT) Model designer has updated to include these separate prints, UFP Sharpie works perfectly as well. Greatly appreciated!!

Had some issues with the finer details, I was able to clean some up. Probably would be more suited to a .2 head. Still look quite cute and will work well tonight

Was some slight imperfections but overall a pretty smooth print. Had a bit of trouble getting the supports out but the model is strong enough that I could tug on them a bit and not worry about breaking anything. Could scale it down a little bit if you're worried about filament usage Printed with esuns matcha green and really happy with how it turned out. Thanks for the file!

Printed really well and supports came off super smoothly, thanks for the print!

Used the .4 head and it turned out nicely, but I can definitely see the .2 head would be better here. used an old toothbrush to remove the worst of the 'hairs'. Still, can't fault the design and the print is gorgeous

Had some issues with the detailing on one of the four I printed (pictured at top) but the others turned out pretty well. used 0.2 head as suggested

Summoned a small army for my book squad, they came out great 👍

These came up incredible, super clean and print auto file worked perfect. used 0.2 nozzle as suggested

I'm super impressed how clearly the numbers came up using .4 head. Great print!

Came out great, really clean. Cheers!

Absolutely epic print, cheers! Took me a minute to realise the supports in the grooves slide out, but once I did they were easy to remove. Also took me a bit to realise two alternative designs are printed at once, but I like having the options. cheers again!

Came out awesome, cheers and Merry Christmas!

Used PLA as it is what I had and it came out well! a little fluffy but minor, and the logo came out really clear

Looks sweet! will make a great Christmas gift for my grinch-loving friend!

Printed perfect! Can't wait for my outdoor spotlight to arrive so I can set it up 😍

comes up so well!! Thanks for the print!!

Gluing the pieces together is a bit of a pain but the print came out perfect

Didn't realise only one of the crescent plates was required and ended up with a half and a full. The full one had some adhesion issues with the black but went fine for the second half. The half crescent printed well though.. Still appreciate the print 🙏