Nagel D

Wanted something with extra storage to not waste space or filament so made large cutout and placed the caliper as low as possible to fit in slim drawers (total height including caliper 85mm). Bin is 1x6 (u) and 4(u) tall (31.8mm)Large compartment for extra storage and a smaller one to fit a blister pack of extra batteries.Magnets and screw holes (print without support)To fit 150mm digital calipers similar to one in picture, generous clearance to hopefully fit similar models.Printed on Bambu Lab P1S in about 2 hour with following settings.0.4 nozzle 0.2 layer height 2 walls 3 top/bottom layers 10% Gyroid infillNo support, no brim.Used 70g filament and print finished in 2 hours. Can probably print faster with larger nozzle or layer height.&nbsp;

Gridfinity Caliper Holder - Low profile/Extra Storage

Gridfinity

dadhacks

This is a shim to adjust the alignment of your destination spool for the Pastamatic Spool Winder. The Pastamatic is an amazing design, but there are some of us that have had alignment problems with the winder mechanism. It would cause the spools to become extremely lopsided as shown in the first few pics. After adding a few shims, I was able to get much more even distribution of the winds (last pic). Each shim should move your spool about 2mm axially. It took 2 shims on the geared side for mine to be in the best alignment. I would suggest printing a few shims and it may take a few tries to fit your specific scenario. Please share your experience below as I would love to hear any positive or critical feedback to help improve this.

Pastamatic Spool Shim

Pastamatic mods

starfalk

A desiccant box with lid for the Sunlu Filamantdryer S4I printed this in ASA to prevent melting. I think PETG should work too.Printable without supports.Please let me know if you have any issues

Sunlu S4 Desiccant Box

sunlu Dryer

InaniaEtVana

A compact Gridfinity compatible tool case for a deburring tool. Uses 6x2mm magnets throughout to keep everything in place. Prefer you bits to be absolutely glued into place? I also added a model that swaps the magnets to 10x2mm for the bits.Lid is optional, and there is on option with text, the other without.Fits a Libraton deburring tool with the following specs:<ul><li>Handle short side width: 12mm</li><li>Handle long side width: 13.4mm</li><li>Handle length: 115mm</li><li>Total length (tool - no bit): 132.5mm</li></ul>Have a deburring tool that is significantly larger or smaller? Let me know and send me a message with your tool its dimensions, I will see what I can do. &nbsp;PS: Make sure you orient the magnets correctly for attaching the lid, failure to do so will lead to poor closure, and maybe loss of limbs, I dunno&nbsp;Liked this model? Have a look at the rest of my Gridfinity Collection models!

Gridfinity Collection -  Deburring Tool Case

Tools

K2_Kevin

<h2 style="text-align: center">Bambu Labs 6 Piece Tool Set</h2><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">NEW LABELED Version now available HERE!</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 33.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_cafe0726686af.png"></a><figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure><figure class="table"><table style="border: 2px solid hsl(0, 0%, 60%)"><tbody><tr><td>Included Tools:<ul><li>AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer &amp; Hub.</li><li>AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)</li><li>AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)</li><li>Buffer Outlet Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and AMS.</li><li>2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.</li></ul></td></tr></tbody></table></figure>&nbsp;If you want to up your cool game, use 6x3mm Magnets. Pay close attention to the magnets polarity (all bottoms face same direction/polarity). They&#39;re designed to fit magnets snugly, but you might need a little glue for some of them.<h3>NEW TOOL SET HOLDER: <a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a></h3><figure class="table"><table style="border: 2px dashed hsl(0, 0%, 90%)"><tbody><tr><td>Example usage:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/bda22def-b638-4952-8963-d468f39e906e.webp"></td></tr></tbody></table></figure>&nbsp;<h3>Checkout some of my other models…</h3><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 52.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_450eebd518686.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img class="image_resized" style="width: 52.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_20146411d27.png"></a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_853680d87f4e1.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener">https://makerworld.com/en/models/81622#profileId-86911</a><a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener"><img class="image_resized" style="width: 52.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_2082d4a4681bf.png"></a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener">https://makerworld.com/en/models/131156#profileId-142275</a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_f618df312f7da.png"></a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener">https://makerworld.com/en/models/152636#profileId-166673</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener"><img class="image_resized" style="width: 52.7%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_de1a3154efbf3.png"></a>&nbsp;&nbsp;&nbsp;This original disconnection tool inspired an entire line: https://www.printables.com/model/382058-bambu-ams-disconnect-tool

Bambu Tools - Bambu Lab Tool Set -Disconnect Tools

P1S Utility

3DPrintCreator

Bambulab AMS Dryer silicagel Perfect Fitting Fast Printing No Supports Needed X1C P1P P1S Upgrade

Gridfinity

Pastamatic mods

sunlu Dryer

Tools

P1S Utility

AMS utility