SlangQC

DownTheShed

Wheels for my business card embosser, these ones have a wave pattern. Designed to work with: <a target="_blank" href="https://makerworld.com/en/models/485772" rel="nofollow noopener">https://makerworld.com/en/models/485772</a> please download and print the case + gears from above.

Squiggle / Wave wheels for business card embosser

buisness

topxnbo

This is my take on the cup holder trash bin for cars.&nbsp;I designed it specifically for my Mini Cooper SE, with a mini logo of course, but given it&#39;s such a small car, i would imagine it should fit most other car&#39;s cup holders. I have also included a lid with a Bambu logo (shown as the cover picture), and a plain lid with no logo if you want to add your own.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/863667/2024-04-15_3e2152906f9a1.gif">I took inspiration from an amazon listing that I liked (I&#39;m sure you can find the same design on AliExpress, Temu etc. and it&#39;s likely from the exact same manufacturer lol).&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/863667/2024-04-15_f8cecd21c55fe.png">however, in order to achieve the tilted top, and keep the lid self closing, i would have to incorporate a spring mechanism of some sort, which seemed overly complicated, so I ended up with a flat design, but still able to make the lid self closing, and here&#39;s how.&nbsp;I basically used Bambu&#39;s studio&#39;s “cut” function, and created three pieces of the lid. the while portion is necessary to retain the integrity of the top (showing) surface, otherwise, you&#39;ll see a line in the middle. then the green / black pieces are separated so I can use different infill %, resulting one side of the lid being heavier than the other, ultimately achieving the self closing mechanism.&nbsp;if you intend to use the plain lid and add your own logo, make sure you follow these steps to achieve the self-closing effect (or please share if you have a better way to achieve different % of infill on the same model)&nbsp;<ol><li>remember the X Y Z position of your model. this is important because every time Bambu Studio cuts your model, it likes to move them apart, but for this exercise, you need to bring them back together.</li><li>cut 0.4mm from the build surface, and bring them back together. I used 0.4mm because my logo design is 0.4mm deep. choose whatever depth you engraved your logo, and that should solve the showing surface.</li><li>cut the remaining piece in the middle through the pivoting axis. I moved the cutting surface to 1mm to one side to make sure the pivoting axles are 100% infill. again remember to bring them back together</li><li>for some reason, you need to assemble all the cut pieced, and move the green/black pieces 0.4mm above build plate. if you don&#39;t assembly them, they will remain “stuck” on build plate.</li><li>once you&#39;ve done all the cut and positioning, you can set green piece to 100% infill, and the black piece to 15% or whatever low % you want, doesn&#39;t really matter. the white part is just two layers, so doesn&#39;t matter the infill. then you should be able to achieve the self closing effect.</li></ol><figure class="image image_resized" style="width:77.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863667/2024-04-15_5080db516de0b.png"></figure>

Self Closing Cup Holder Trash Bin

cruse2382

Edit - Reorientated and enlarged so now it prints loads better and all words a readable but would still benefit from a 0.2mm nozzle but no longer a big difference. &nbsp;will look 100% better with a 0.2mm nozzle but i don't have one fitted at the minute so did it with a 0.4mm thats why a couple of letters don't look great.

UPDATED kitchen conversion chart

kitchen

Molodos

Update: Transparency issues should be solved as there now is a black layer to prevent shine-through&nbsp;A cool uno reverse card for your wallet. Always be ready to use it!Features<ul><li>Cool looking</li><li>Dual sided</li><li>Fits your wallet (credit card size)</li><li>Scale the thickness up or use the according print profiles if you want less shine through</li><li>Print profiles for 0.4mm nozzle available, too (less details)</li></ul>Recommended print settings<ul><li>Nozzle: 0.2mm</li><li>Layer Height: 0.1mm</li><li>No supports needed</li></ul>You like my work? Consider to <a target="_blank" href="https://www.buymeacoffee.com/molodos" rel="nofollow noopener">buy me a coffee</a> :D

Uno reverse card for wallet (credit card size)

0.2 mm nozzle

75echo

DJI FPV wall mount (hidden)

MC Taz Man

As I didn't want to print the original with supports, added some fire :D<figure class="media"></figure>

Fireball Template Remix

eatrix

My model of Robert/People planter, this one is called “Listener”.&nbsp;For medium sized plants choose medium sized version, cup size 80 mm / 3.15 inch.For larger ones increase cup size to 110 mm / 4.33 inch.Print profile file is medium size.&nbsp;This model needs some minor supports. If you have some problem with bed adhesion - use Brim.I like to print these planters with fuzzy skin turned on (contour, fuzzy skin distance - 0.3, fuzzy skin thickness - 0.1).It can be printed smooth also, just be sure to check that seam is placed at Back/Rear or paint it at the back&nbsp;When planting cactus or succulents at the bottom I add a little bit of pebbles for drainage and then potting soil.And don&#39;t forget to water it according to your plant needs :)&nbsp;If you want 0 maintenance decoration, you can also use dried flowers. For example you can add floral foam (it costs under 1 euro/dollar) to the head/pot for the base, put moss on top (or substitute with small pebbles) and stab dried rainbow gypsophila (or any other similar dry flower) in foam. It looks kinda cool and stays that way for a long time:<figure class="image image_resized" style="width:65.29%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458984/design/2024-05-09_cfec527231f16.jpg"></figure>

People planter "Listener"

fêtes

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

organizer

mcmaven

This Print Profile includes all the components you need to upgrade your AMS to use loose (silica gel) desiccant. And the additional Dry Pods allow the AMS to hold more desiccant, which will mean longer times between refreshes.&nbsp;This has been done before, in many different combinations, but I couldn&#39;t find one that met all my needs. I feel that this remix contains the best combination of AMS Dry Pod and Desiccant Containers that are currently available, and I added a Funnel to help load them with silica.  There are 3 parts included that can hold the hygrometer, only print one: 1) a Shallow Hole version with slots for the hygrometers with 30 degree tabs that can hold more desiccant, 2) a Shallow Hole version with slots for the hygrometers with vertical tabs that can hold more desiccant, and 3) a Thru Hole version with 30 degree slots for the hygrometer tabs, designed by FLAP_design, where the hole for the hygrometer goes all the way through the pod. This version holds desiccant in the Dry Pod, but it can generate a more accurate reading because it will be measuring the overall AMS humidity, rather than the humidity of the desiccant in the Dry Pod with the hygrometer, i.e., the readout is less likely to be be distorted by the silica close to the reader.&nbsp;Just drag your preferred option onto the build plate.  The Round Hygrometer can be found here: <a target="_blank" href="https://www.amazon.ca/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLQMR97" rel="nofollow noopener">https://www.amazon.ca/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLQMR97</a>&nbsp;The Desiccant Containers can be loaded with generic desiccant and dropped into the slots in the back of the AMS. The top of the Desiccant Containers is split into two parts. The lower part should be glued on, and the upper snapped in after desiccant is added. They are easy to remove and replace the desiccant in.&nbsp;I used this desiccant: <a target="_blank" href="https://www.amazon.com/gp/product/B07QRRHJV3" rel="nofollow noopener">https://www.amazon.com/gp/product/B07QRRHJV3</a>&nbsp;To refresh the desiccant; pour it into a glass tray, place in the microwave for 2 minutes. Let it cool, then pour it back into the Dry Boxes. DO NOT put the Dry Boxes in the microwave! The desiccant gets VERY hot and will melt the Dry Boxes.&nbsp;Note that the Dry Pods will also work with the Hydra spool tray.Or if you are using the factory Bambu AMS spool tray then after inserting the Desiccant Containers, the original AMS dessicant covers can be snapped on top of them.&nbsp;With fresh desiccant, the humidity was down to 10% after a couple of hours, and it has stayed there for over 2 months now.&nbsp;24/4/7Added Pod for round hygrometers with vertical tabs.&nbsp;24/06/13V3.3 version adds an extension to the Funnel that allows it to cover Wide Dry Pods so desiccant is not lost when filling them. The same Funnel works also with Narrow Dry Pods.&nbsp;

AMS Dry Pods Wide, Narrow, Hygro, Trays, & Funnel

printer parts

Binrux3D

&nbsp;&nbsp;&nbsp;Model:&nbsp;Crazy desk marble fidget toy! This took way too long to design and prototype, I hope it shows!&nbsp;Printing:&nbsp;Use provided print profiles for best results! I&#39;ve tested sizes down to 35% which have still worked, but I&#39;m only including the 100% and 50% versions as print profiles. If you want the 35% or 75% feel free to scale the print profile, or download the included STL:s.&nbsp;Print profile which is full sized is actually scaled to 98% of the original model so it can fit A1 mini plate. full sized ball is also scaled to 98%. Either way this model works with pretty much any scaling (down to 35%)! Just add the same scale to the ball and model and you should be golden!&nbsp;Print does not require any supports or assembly. Works straight out the bed!&nbsp;!IMPORTANT!&nbsp;The ball needs to be cleaned after printing from all of the support residue. Use side cutters or a knife to get it round!&nbsp;Hope you enjoy the model!&nbsp;BONUS&nbsp;Check out my latest marble creations! &nbsp;<a target="_blank" href="https://makerworld.com/en/models/464194#profileId-372921" rel="nofollow noopener">Crazy Marble Fidget Toy V2</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-14_cc9d379e79ec.gif">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/441052#profileId-346770" rel="nofollow noopener">Smooth Marble run:</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-04-25_7fbdd6872b67e.gif">&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/450626#profileId-357615" rel="nofollow noopener">Crazy Skeleton Marble Track:</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-02_cd1ede4a92837.gif">&nbsp;