SkysThLimit

KorezGuitars

Made myself a honeycomb wall for my X1C printer to store my tools and other stuff and saw that some people like the idea, so ive uploaded the models for the wall and hooks.&nbsp;&nbsp;First upload had some issues with the mesh count because of my haste uploading it i neglected to check it the count is right, but now its fixed! If the project isnt fitting like it should, count out the honeycomb count, by height it should be 18, if you have less, please download the stl. file that will get you to the right count of honeycombs! If you printed 4 honeycomb wall before the 15.06.24 update you have a file under the slt. download with the name ‘’Honeycomb wall fix 8 honeycomb&#39;&#39;, if you printed 6 of them use the stl. file with the name ‘’Honeycomb wall fix 3 honeycomb&#39;&#39;. if you are unsure of how many honeycombs your wall has, check the foto below to know how i count them. Again I am very sorry about the situation and any waisted filament because of it!&nbsp; If you are printing this project after the 15.06.2024, (06.15.24 USA) you are ok, all should fit as it should&nbsp;<figure class="image image_resized" style="width: 60.53%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492032/design/2024-06-15_5b0758c688639.png"></figure>This is how the mesh should fit together, the numbers on the right side indicate the honeycomb count &nbsp;Note: This does not include any models of things that are on my setup.

Bambu lab printer wall honeycomb storage wall

bbu stuffs

pumpkin20303

Eyes up Guardian!&nbsp;Can't get enough of grinding for loot in Destiny? Now you can have your very own Glimmer Loot Chest.&nbsp;You can either add LEDs with a battery like I have or use the cheap battery powered LED Fairy Lights, or just you it as a box. I used some small 3mm blue LEDs I had, with a AAA battery holder and toggle switch.&nbsp;If you are going to use LEDs to light up the Glimmer, its best the print it with 0 bottom layers and 0 infill so it gives a nice glow.&nbsp;For the hinge you can either use M2 screws or use a small length of filament and melt the ends with a lighter and squish it, almost like a rivet.

Destiny 2 Glimmer Loot Chest Box with LEDs

destiny 

WorkShop3D

Sharing the newest addition to the Sanrio collection ; Cinnamoroll! Enjoy.

Cinnamoroll Sanrio Keychain

cinammarol 

BRADCAD

Converts 73.5mm (~3in) spools to 55mm (~2in) spools to work with the AMS Lite. Designed for fitting Sunlu spools that always slip off the AMS Lite system. You do not need to print support with this model. Feel free to remix for other spools! Print at 15% infill. PLA will work great! When assembling, you will need to bend the part inward. It will act as a spring to grip the spool. A tight fit is needed so it does not fall off the AMS lite. To take it out of your spool, push with 2 thumbs on the opposite side, and it should pop right out. NOTE: Some rolls have draft (a slight taper) on the inside diameter walls. If the adapter does not fit well, try inserting on the other side of the roll.

Sunlu AMS lite adapter

adapter 

fireboy02

Perfect DND Dice tower for all types of board games. Supports the D20 dice as well as many other dice!&nbsp;No supports needed 2 wall lines15% supportive cubic infill

Castle Dice Tower

dice towers 

BrewBoy

Plinker V2.0 (Bolt-Action Blaster):&nbsp;The second entry in my shell-ejecting plinker series. The V2.0 features a bottom loading magazine and functional rails for mounting accessories, STEP files are included if you would like to make your own adjustments or parts. This is an ongoing work in progress as I continue to make improvements and different accessories to allow for lots of different customizations.&nbsp;Only requires a nuts, bolts &amp; a few springs (<a target="_blank" href="https://www.aliexpress.com/item/1005002523758634.html?aff_platform=true&amp;aff_short_key=UneMJZVf&amp;isdl=y&amp;src=bing&amp;pdp_npi=3%40dis%21CAD%211.49%211.49%21%21%211.88%21%21%40%2112000021005031078%21ppc%21%21&amp;albch=shopping&amp;acnt=135095331&amp;isdl=y&amp;albcp=412811419&amp;albag=1311717734383599&amp;slnk=&amp;trgt=pla-4585581970548950&amp;plac=&amp;crea=81982433154568&amp;netw=o&amp;device=c&amp;mtctp=e&amp;utm_source=Bing&amp;utm_medium=shopping&amp;utm_campaign=PA_Bing_CA_PC_customlabel1&amp;utm_content=customlable1%3D7&amp;utm_term=aliexpress%20305mm%20spring&amp;msclkid=91572ea3b6a41a4e20b94b3fbac2f23b" rel="nofollow noopener">305mm Compression Spring Wire Dia 0.3 0.4 0.5 0.6 0.7 0.8 1 - 5mm Outer Dia 3 3.5 4 4.5 5 5.5 6 7 8 10 12 - 60mm Length 305 mm (aliexpress.com)</a>) ***This link may not work in your region. Check the assembly guide for the required spring dimensions to help you find ones in your area.&nbsp;Firing Video: <a target="_blank" href="https://www.reddit.com/r/3Dprinting/comments/1bu5t05/plinker_v20_boltaction_toy_blaster/" rel="nofollow noopener">Plinker V2.0, bolt-action toy blaster : r/3Dprinting (reddit.com)</a>&nbsp;Please check out the Assembly Guide PDF for parts list and assembly Instructions. Short version has identical parts requirements and assembly, some parts may appear slightly different between versions.&nbsp;Check out the Targets and Ammo box I made for the Plinker V2.0: <a target="_blank" href="https://makerworld.com/en/models/441802#profileId-347641" rel="nofollow noopener">Ammo Box &amp; Targets for Plinker V2.0 by BrewBoy - MakerWorld</a>If you enjoyed this model then you will probably like my pump-action launcher: <a target="_blank" href="https://makerworld.com/en/models/229678#profileId-265500" rel="nofollow noopener">Pump-Action Plinker (Toy Launcher) by BrewBoy - MakerWorld</a>&nbsp;DRY FIRING MAY CAUSE THE BOLT TO BREAK.&nbsp;UPDATE (APRIL 17, 2024):<ul><li>Added Raw model files for long rifle version with a telescopic stock (Print profile and additional build info coming soon).</li><li>Small Updates to Build Guide.</li></ul>UPDATE: (APRIL 26, 2024):<ul><li>Added raw model files and print profile for two new accessories: Tactical Scope 0x &amp; Angled Foregrip</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000410146/design/2024-04-25_02ebb05dd0f38.png"><figcaption>Side View - X-ray Internal Assembly.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000410146/design/2024-04-17_a4c948f52ba57.png"><figcaption>Best Orientation for Printing</figcaption></figure>

Plinker v2.0 (Bolt-Action Blaster)

fun toys 

Jakob1508

official 3d made a greate job modeling this so i had to print it and share it here on makerworld. &nbsp;14.10.23: i have added a print plate with a testfit model in 100 and 120% try some different sizes to fit it perfectly13.10.23 sadly it does not fit my big head i will have to print it bigger to fit and then i will update a profile. &nbsp;&nbsp;&nbsp;

Iron Man Helmet + testfit file

cosplay

JoshuaVanKamp

Create your own miniature X-Wing starfighter with this intricate kit card! Designed for 3D printing, this model captures the iconic silhouette of the Rebel Alliance’s agile spacecraft. Hang it from your Christmas tree, light fixture, or rearview mirror—the possibilities are endless. The detailed STL files are available for free download, allowing you to bring a piece of the Star Wars universe into your physical space. May the Force (and your 3D printer) be with you! 🌟🚀 extra parts (https://makerworld.com/en/models/404015)&nbsp;

X wing kit card

card kits

Kit Crafters

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_f1453f4ce4fc8.png"></figure>&nbsp;ORIAS is the first of my series of mecha model kits. Equipped with 2 long range artillery systems as the arms, ORIAS is a mecha combat suit with 8 articulation points that are fully posable. AMS is not required; each part is printed independently without supports.&nbsp;No need for PETG, all the prototyping and model images were printed with PLA.&nbsp;The provided profiles are:<ul><li>A1 mini<ul><li>Single Color</li><li>Three Color Scheme</li></ul></li><li>A1/X1/P1<ul><li>Single Color</li><li>Three Color Scheme</li></ul></li></ul><h4>Other Mechas in the Series:</h4><ul><li>[Belial](https://makerworld.com/en/models/224105#profileId-242085)</li><li>[Morax](https://makerworld.com/en/models/185322#profileId-204029)</li></ul><h3>Assembly Instructions:</h3>Parts:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_87c93e2bf1322.jpg"></figure>&nbsp;Body:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_04f9cba5ce1c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_d6bc499b21374.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_861a5264d1055.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_eecf05a7c0a76.jpg"></figure>Arms:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_1ab2cd439110b.jpg"></figure>&nbsp;Legs:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_0d936e3987f46.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_6425f8ebd42aa.jpg"></figure>Final Assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_310812c7bf527.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179243/design/2024-02-09_6c9b71d73f285.jpg"></figure>

ORIAS - Combat Mecha

Gundam 

Lockwick

I added a ribbed ring to the original model that I found too slippery and played a bit with tolerance so you should be able to assemble it without any glue!

Ribbed Clicky Oreo Spinner [NO GLUE]

fidget toys

Chipped Builds

Dungeons and dragons multicolor coaster&nbsp;***If you want to sell this model you MUST have an active subscription to my Patreon***<a target="_blank" href="https://patreon.com/chippedbuilds?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">https://patreon.com/chippedbuilds?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link</a>&nbsp;

D&D Coaster

AcmeArt

Revised listing for perfect sizing. These are Resin vat pegs for resin 3d printers, place one in the corner of your vat before running a cleaning cycle in the corner when the edge of the cured sheet is, After running the cycle, gently pull up on the peg to remove the sheet.

REvised for correct size! resin vat removal pegs for easy fep release after vat cleaning

resin 

Powerpill.prints

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_482e88eb7e05f.png"></figure>This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 30 minutes to an hour to print! This Eevee Evolutions pack includes the following Characters: Eevee, Flareon, Espeon, Vaporeon, Jolteon and Umbreon! <a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">The three evolutions: Glaceon, Leafeon and Sylveon are in Pack #8</a> <a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener"><img class="image_resized" style="width: 30.97%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-14_3ab95d58e1041.gif"></a><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_4b712df4c57ba.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_ed5d31eadc8b3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_2f3f64f70a6df.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_366891a0ec5ab.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_d454162579477.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_9db4c750c919b.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Hope you Catch, er, Print them all!! Like this pack? Check out my other video game keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Pokemon Keychain Pack #2 - Eevee, Glaceon, Espeon

Pokemon 

Hemoner

The use of the Bambulab logo is decorative only, this model is not an official Bambulab model&nbsp;There are 3 versions:<ol><li>Regular one (AMS)</li><li>One color (No-AMS)</li><li>6 Hotend version</li></ol>&nbsp;This is a Bambulab A1 series hotend storage box, I was inspired by <a target="_blank" href="https://makerworld.com/en/u/3854142654" rel="nofollow noopener">Harry Porpise</a> accesory box aesthetics, check his profile!Is meant to be combined by his accesory box, check the model in here:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/113622#profileId-122125" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000134043/design/2023-12-29_150af275d2633.webp"></a>&nbsp;It has capacity for four hotends and one bag full of screws&nbsp;Want to hang it in your wall or hex base? Try this remixes!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/454847#profileId-362348" rel="nofollow noopener">https://makerworld.com/en/models/454847#profileId-362348</a><a target="_blank" href="https://makerworld.com/en/models/404445#profileId-306200" rel="nofollow noopener">https://makerworld.com/en/models/404445#profileId-306200</a>&nbsp;Also check this silicone sock box!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/190345#profileId-210110" rel="nofollow noopener">https://makerworld.com/en/models/190345#profileId-210110</a>&nbsp;UPDATES01/17/2024 - Added a version that supports 6 hotends (Thanks <a target="_blank" href="https://makerworld.com/en/u/327161251" rel="nofollow noopener">@PaBa</a>)01/16/2024 - Added one color variation, for people with no AMS! The white text and graphics are just grooves, so is easy to print01/15/2024 - Added new cover version with looser fit, if you are having problems with the regular cover, print this (It has 0,1mm tolerance)&nbsp;If need variations of the model, ask me for it!

Hotend box - A1 Series (AMS & No-AMS)

printer accessories 

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 200mm x 200mm&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a three color hueforge, it will require two pauses with manual filament changes.&nbsp;&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #15 (1.2mm) swap to Grey At layer #20 (1.44mm) swap to White for the rest.

Year of the Dragon Hueforge NO AMS Needed

hueforge 

HribaDesign

I searched and printed a lot of different models, but each one had minor or major flaws, so I decided to tweak my own.<h4>Print instructions</h4>Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the endsI printed on Voron2.4R in the settings for voron parts.

Lego train - Round track rail

lego

planpa3d

What better way to protect your switch games, than inside Yoshie’s egg?The Game insert carries up to 10 switch games and can be removed for additional storage!I originally created this for my patreon supporters and wanted to share this MMU version for free here on makerworld, as they have been so generous. &nbsp;I would like to keep this as a makerworld exclusive as makerworld has been amazing with their support for creator / designers like myself.&nbsp;I ran several test prints with the threads already attached to the bottom of the egg. This changed the orientation of the bottom egg, and the steep overhangs on the bottom caused poor print quality. I found separating the threads and creating a connection piece simpler to print and had the best results.I added a "top cap for game storage" part that will get glued inside the top of the egg, as I noticed that flipping the egg around and playing with it causes the games to fall out of place. By adding this part, it should eliminate that problem.I also recently created a bottom part with a large flat area, hoping to one day design a Yoshi to fit inside.I discovered that when creating this design as a single extruder version, where the spots are printed separately, caused some issues with print quality as well. This is one application where print quality can be improved through MMU or dual color printing. Although I understand why this option isn't always the best as far as cost is concerned with the wasted filament purges.&nbsp;If printing this design out for personal use, you would want the best quality print and I provided the MMU version here on makerworld for free.&nbsp;If printing this design out to make sales, you would want the least expensive option to produce, so I will be adding the single extruder version back to my patreon in December 2023, if you are interested in selling prints of this design.&nbsp;You can follow me on instagram, <a target="_blank" href="https://www.instagram.com/pla.n.pa/" rel="nofollow noopener">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on. If you’re interested in selling prints of my designs, become a Patreon supporter here…<a target="_blank" href="https://www.patreon.com/planpa3d" rel="nofollow noopener">https://www.patreon.com/planpa3d</a>&nbsp;

Yoshi Egg switch game holder MMU

Nintendo

MottN.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, consider giving it a boost to support the creation of more cool stuff! Thanks!</boostcontent></boostme><ul><li>Update 2023_11_15: added links to finger tracks XL for anyone struggling to get the print to work.</li><li>Update 2023_11_13: Updated files to chamfer some additional corners on the tread to feel nicer.</li><li>Update 2023_11_10: Updated models and print profile. Model is optimized to print better and the track will be much more reliably free running.</li></ul>&nbsp;Everyone needs some tracks to drive around with their fingers!This is a very satisfying and fun fidget, and also my first print in place model :)&nbsp;When first printed each track joint may take a tiny bit of force to free up; after that the tracks should run freely with little effort.&nbsp;To remove track:If it continues to be difficult to run, or has a sticky spot, you may have to remove the track to completely free up.This also makes for an easy multi-color model; print in two colors and swap tracks! (Don&#39;t risk this if your material doesn&#39;t have good layer adhesion like some matte or silk PLAs, you will break the track pegs.)&nbsp;To remove the track, hold with the connected side of the track body down, and with your fingers apply pressure on the wheel hubs to bend slightly inwards. This should provide enough clearance that the track can easily be removed.Replacing the track is slightly more difficult but follow the same basic strategy of flexing the track body.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-13_dd9789575054a8.gif"></figure>&nbsp;PrintingThe model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.&nbsp;If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it&#39;s not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.&nbsp;&nbsp;Print in the orientation shown below or as in the print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-07_d1b42cc880c0e.png"></figure>&nbsp;If you want to print several different colors, you can fit 5 on the build plate in print by object mode. Then just print overnight or come back in ~10 hrs. I&#39;ve uploaded this profile as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-10_af9cff3ff21ad.png"></figure>&nbsp;Related cool stuff!If you are having trouble with durability of the pins or tracks, or just not being able to get things to free up, check out the Finger Treads XL model. It has bigger pins and is a little more forgiving because of its larger size. It&#39;s big enough its not quite as good of a fidget, but still a very satisfying print in place model and fun to play with.&nbsp;Get it here: https://makerworld.com/en/models/65624#profileId-68957&nbsp;Size comparison below - XL version top.<figure class="image image_resized" style="width: 32.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_b4cf6d1a056c8.jpg"></figure>&nbsp;&nbsp;&nbsp;If you have printed a bunch of these and need something to do with them, check out the Benchy-Dozer!https://makerworld.com/en/models/85433#profileId-91329<figure class="image image_resized" style="width: 41.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_c16db6c5576808.jpg"></figure>&nbsp;

Finger Treads Fidget Track - Print In Place

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

dragons 

Jazzy Plz

The base model is a size 10 and I went through and did test prints to get as close as I could to general ring sizes to make things easier for folks to print. You may need to adjust as you see fit for shrinkage and other things but as it stands, it is close enough for a base! These types of rings are used for all manner of finger issues but is generally seen for hypermobility, EDS (Ehlers-Danlos syndrome), trigger finger, swan neck, etc. I have personally done them in resin, PLA, and PETG. You can generally fir two of these per finger. Ring Size 4: 75% Ring Size 4.5: 77% Ring Size 5: 80% Ring Size 5.5: 82% Ring Size 6: 83.5% Ring Size 6.5: 85% Ring Size 7: 88% Ring Size 7.5 : 89.5% Ring Size 8 : 90% Ring Size 8.5 : 95% Ring Size 9: 96.5 Ring Size 9.5: 98% Ring Size 10: 100% Ring Size 10.5: 102% Ring Size 11: 104% Ring Size 11.5: 105.5% Ring Size 12: 107% Ring Size 12.5: 108% Ring Size 13: 110% Ring Size 13.5: 115%

Hypermobility Finger Splint

helpful 

SmileyPrinter

Magnetic fidget sword as seen on TikTok! One side of the sword attracts while one side repels its scabbard. While the magnets are repelling it creates a springy sensation that is great for fidgeting. If you push the sword down and quickly release you can make the sword go flying!While the magnets are attracting it creates a satisfying click noise as it fully closes.Let me know what sizes you would like!Uses 12 magnets, 3 for each half of the sheath and 3 for each side of the sword blade.Print 2x of the blade hilt and 2x of the sheath. More magnet sizes to come! Design files are included so you can decorate the parts as you wish to fit your personality and magnet size.Print on the flat side, no supports required. Use super glue to glue the hilts to the sword blade and the two halves of the sheath together AFTER GLUING THE MAGNETS IN. (Once the two halves of the sheath have been glued it will be basically impossible to get the magnets in). Rock model from: https://www.myminifactory.com/object/3d-print-stone-218700#google_vignette<h4>MAGNET ORIENTATION </h4>Orientation is crucial to get the right effect!Glue the magnets with north facing outwards on one of the sheaths and on the other glue the magnets with south facing out. For the sword repeat the process so one side of the sword has magnets with north facing outwards and the other side has south facing outside.