Sjcrichardson95

达文西FPV

关节可活动，没有使用支撑，目前只有单色，以后可能会出多色，暂时没有好的多色方案，大家有好的想法可以留言!直接打印只需要2个小时左右，但是为了顶部曲面打印效果更好，我调整了自适应层高，打印时间就会增加到4个小时左右，放大或者缩小后效果会消失，需要重新调整，我试过最小50%打印，关节也可以自由活动！<ul><li>Joints can be moved, without the use of support, only monochrome at present, there may be multi-color in the future, there is no good multi-color scheme for the time being, everyone has a good idea can leave a message!</li><li>Direct printing only takes about 2 hours, but in order to print the top surface better, I adjusted the adaptive layer height, Print time will increase to 4 hours or so, zoom in or out after the effect will disappear, need to re-adjust, I tried a minimum of 50% print, The joints are free to move!</li><li><a target="_blank" href="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395" rel="nofollow noopener">最新3D打印宫崎骏《龙猫巴士》_哔哩哔哩_bilibili</a></li></ul><figure class="media"><oembed url="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure><a target="_blank" href="https://www.douyin.com/user/self?modal_id=7369237370975096118" rel="nofollow noopener">达文西FPV的抖音 - 抖音 (douyin.com)</a>

My Neighbor Totoro Bus龙猫巴士

fidgets

jwalker55

Spiral Vase

home decor 

Sam HellMyth

Cute miniature statue of sleeping bearCan be printed Single and Multi colorIf you have single color printer you still able to print multicolor, just need print separate figure of bear and snow pillowsIf you printed bear separately you need to use supports at the bear belly :0)&nbsp;If you like cute bears check my other more complicated and cool assembled model of bear flying on balloonhttps://makerworld.com/en/models/230355

Cute figure of sleeping bear

baby room

HIY12002

Taylor Swift with Travis Kelce Jersey Ornament. Another request from family and friends. No brim needed, must use an AMS. Set up to print 2 at a time, delete one if you only want one.&nbsp;There is another profile that is not an ornament, without the hoop for a hook. &nbsp;Use my uploaded profile for the correct layers, if you don't you will have to do the color changes below.Start with Black At layer #3 (0.32mm) swap to Red At layer #11 (0.96mm) swap to Beige At layer #22 (1.84mm) swap to White for the rest.

Taylor Swift Travis Kelce Jersey

valetines

MrGnarly

Remix includes updated model fixes for easier printing and consistency.&nbsp;All credit goes to the author below&nbsp;<a target="_blank" href="https://www.thingiverse.com/thing:2846113" rel="nofollow noopener">Yoshi from Mario games - Multi-color by bpitanga - Thingiverse</a>&nbsp;

Yoshi from Super Mario

mario

dice throne 

fourth wing

Cinderwing3D

Hello everyone!  Today I want to present to you the first ever completely free Cinderwing3D Dragon - The Bamboo Dragon! Bambulab reached out to me asking if I wanted to make a dragon for them and seeing how I use their printers for prototyping.... it was an easy yes!As with all my designs this model is an easy print-in-place and requires no supports. All you need is a clean bed and you&#39;re off! I also have included two 3MF files for multicolor, as shown in the pictures!  Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. Please feel free to join our <a href="discord.gg/cinderwing3d" rel="nofollow">Discord</a> chat for help and discussions. Filaments used were Bambu Green PLA Basic, Bambu Red PLA Basic, and Gold Bambu Silk PLA! <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=3729583&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Feel free to use my affiliate link to grab some for yourself!</a> The Green Gradient filament <a target="_blank" href="https://amzn.to/3Htn19A" rel="nofollow noopener">can be found here!</a> The Green and Brown Gradient <a target="_blank" href="https://amzn.to/47N8EYF" rel="nofollow noopener">can be found here!</a> And the Tricolor<a target="_blank" href="https://amzn.to/3UfR3W3" rel="nofollow noopener"> is here!</a> ----- Hi, I&#39;m Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale.  The Digital files are never to be re-sold, shared, or given away!<h4>Commercial License and monthly bonus models: <a target="_blank" href="https://than.gs/u/1780858?plans=true&amp;affiliateCode=jazzyplz" rel="nofollow noopener">Thangs Memberships</a> <a target="_blank" href="https://www.myminifactory.com/users/Cinderwing3D?show=tribe" rel="nofollow noopener">Tribes</a> <a target="_blank" href="https://www.patreon.com/cinderwing3d" rel="nofollow noopener">Patreon</a></h4><h4>Please see our other public models here: Check us out on our socials! <a target="_blank" href="https://www.facebook.com/cinderwing3d" rel="nofollow noopener">Facebook</a> | <a target="_blank" href="https://twitter.com/cinderwing" rel="nofollow noopener">Twitter</a> | <a target="_blank" href="https://www.instagram.com/cinderwing3d/" rel="nofollow noopener">Instagram</a> |<a target="_blank" href="https://tiktok.com/@cinderwing3d" rel="nofollow noopener"> Tiktok</a></h4>

Bamboo Dragon Cinderwing3D X BambuLab

dragon

carebear

game of thrones 

flowerrs

ghibli

Xander Designs

Check out our new Fortnite Models:Victory Crown Pillow- <a target="_blank" href="https://makerworld.com/en/models/182885#profileId-201478" rel="nofollow noopener">https://makerworld.com/en/models/182885#profileId-201478</a>Fortnite Gift Box- <a target="_blank" href="https://makerworld.com/en/models/171979#profileId-188799" rel="nofollow noopener">https://makerworld.com/en/models/171979#profileId-188799</a>&nbsp;Update: 21/02/2024Due to the small black border pieces being hard to print and glue together for some, i have redesigned the model to incorporate these in a base plate making it super easy to glue together.&nbsp;Update: 03/01/24As Requested Pre-painted Print in place AMS Profile added, no need for glue as the sign will friction fit the base.Plate 1 does require 5 different colors so you would need more than 1 AMS Unit, unless you change the light blue to white then you can print with 1 AMS.…………………………………………….&nbsp;This is a must have Trophy for any Fortnite enthusiast.Designed to be printed on standard machines so no need for AMS.Sliced on 5 individual colored plates that match the original logo but feel free to mix up the colors.Glue is required to fix the parts together.&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a><figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/Kmmdzij6lG8"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Kmmdzij6lG8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Kmmdzij6lG8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

Fortnite Trophy #1 Victory Royale

fortnite 

peterow

Mountain Range Reflection is a truly stunning piece that looks fantastic in any room!

Mountain Range Reflection Amazing Wall Art 

wall art 

Titan3DPrintingAU

Single bed print of a Mandalorian Helmet. Have included the Raw files as well as the file broken up (in RAW form)

Mandalorian Helmet

Star wars

Scattered Collectables

Ornamental Pokeball modelSimple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something insideThe outer ring is optional, the part just slides over and can be held on with glue&nbsp;Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables

Ornamental Pokeball

pokemon

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

games

johnny2shae

Command Wolf Zoid

zoids

planpa3d

I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.Just can’t wait to see the Movie being released this year!!Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.NOTE: This version does not include the Switch game holder insert, the hex pieces to hold the spikes, nor the spiked pieces themselves.If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,<a href="https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer" rel="nofollow">https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer</a>&nbsp;I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm<a href="https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow">https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1</a>&nbsp;All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together. The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.With the trim printed and assembled, it should be glued to the completed bottom shell.When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on.&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here…<a href="https://www.patreon.com/planpa3d" rel="nofollow">https://www.patreon.com/planpa3d</a>&nbsp;Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…<a href="https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert" rel="nofollow">https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert</a>&nbsp;Happy Printing,Jeremiah&nbsp;

Turtle shell container

Nintendo

bnull49

luffy from onepeice printed at .2mm 15% infill and tree supports

luffy one piece

one piece

jsalonis

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Earth Brown Transmission Distance: 0.3 PLA PolyLite Pink Transmission Distance: 3 PLA PolyTerra Army Beige Transmission Distance: 0.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #22 (1.84mm) swap to Earth Brown At layer #45 (3.68mm) swap to Pink At layer #50 (4.08mm) swap to Army Beige At layer #51 (4.16mm) swap to Beige At layer #56 (4.56mm) swap to White for the rest.

HueForge Eevee [Multicolor]

hueforge

JDJDJD

<h3>Meet the ProClip!</h3>The ProClip Filament Clip is a pleasure to use and easy to print.&nbsp;ProClip has a built-in handle that works in coordination with a clamping tunnel to manage and secure your filament.<h3>NEW! ProClip V2 features:</h3><ul><li>A extra durable clamp inside the tunnel.</li><li>Symmetrical input holes work for right handed and left handed users.</li><li>Handle flange provides good control and a comfortable grip.</li><li>A Low Profile option designed for tight storage containers.</li></ul>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000030298/design/2023-09-30_0e45d041d5e2.gif"></figure>&nbsp;<h3>BENEFITS:</h3><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Designed for FDM Printing</li><li>Free to Download!</li></ul><h3> </h3><h3>UPDATES:</h3><ul><li>10/06/23 ProClip V2 Released</li></ul>&nbsp;<h3>TIPS:</h3><ul><li>MUST be printed on side</li><li>Printer tolerances vary. If your ProClip is running tight just slide a piece of filament back and forth to break it in a little bit.</li><li>Glue stick can help condition the print bed for proper adhesion/release and is recommended.</li></ul>&nbsp;<h3>NOTES:</h3><ul><li>ProClip can be used commercially, but can’t be resold.</li></ul>&nbsp;<h3>TESTED PRINT DETAILS:</h3>ProClip has been built around the following conditions.<ul><li>Glue Stick: Yes (without is at your own risk)</li><li>Support: Disabled</li><li>Walls: 2</li><li>Brims: No</li><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Infill: 15% Gyriod</li></ul>