I was sitting on the toilet the other day, thinking about which model I should make next... I went with the most obvious one :-D The toilet isn't working, sorry. No glue needed. Just print and have fun. All of my models are 100% handmade designs! No AI-shit ! Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

Man, it's hot again today—I wish I were sitting in a cooling container … Wait a minute, why don't I have a refrigerated container for my 1:64 models yet? Here is the cooling container for your 1/64 scale car diorama. All doors can be opened and you don't need any glue or extra filament. As it is modularly pluggable, the container can be customized according to your wishes. More variants, doors, tops and side parts are coming soon!

What’s a must-have for a proper off-road diorama? That’s right—the classic tent! I’ve made four different tents, so there should be something for everyone. If not, just let me know :-)

What’s the best part of any road trip? Of course, it’s waiting for hours in traffic until you finally reach the toll booth or the border crossing. That’s exactly what happened to me recently, and I thought, “Man, I’ve got to recreate this awesome experience in 1/64 scale.” And here it is! The barrier is movable, and the guardhouse can be assembled however you like. All parts are designed to snap together. No—or almost no—support is needed, and no glue is required.

The other day I was standing at a gate and thought to myself, “That's what's missing from my 1/64 diorama!” So I fired up my computer, and voilà—here are two different gates. Both are available in single or two-tone colors. No glue needed. Just print, carefully remove the support and have fun.

Today I have two park benches and a trash can for you. Just print them out and have fun! Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

My son really wanted his 1/64 scale car to have a blue light. No problem! And I’m sure this would be something you’d like, right? I’ve made four different blue lights in two different sizes. And as a bonus, three different rotating lights. Can’t find the design you’re looking for? Just send me a message. No glue or support needed. Just print and have fun. Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

You still need a safe for your 1:64 garage or for your next heist. Well, I’ve got three different models for you here! No glue needed. Just print, carefully remove the support and have fun. Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

I made a few road tiles for your diorama. Since I don't know how long your diorama will be, I just made a modular system that you can extend as long as you like. No glue or support needed. Just print and have fun. This is a reupload of the model, so don't be surprised if you've seen it before :-D But that's the last one, I swear. From now on, it's all new models! Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

Since the cables on my Ergotopia height-adjustable desk run through the frame and hang down, I designed a simple holder that just clips between the two bars.

I printed an adapter for the Soluna pleated blinds so I could mount the clamp bracket on the window. The adapter is 7 mm long, which allows the pleated blind to be mounted even on windows with thinner frames.

I needed a Land Rover sign for my 1/64 diorama. So I designed it and wanted to share it with you. No glue or support needed. Just print and have fun. This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

Are you building your 1/64 scale dream diorama and still need a bed? I've made three different beds here, inspired by the IKEA Malm bed.No glue or support needed. Just print and have fun. This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

Hey, I can't even see my car in the 30 ft container! Here is the solution! Just replace the doors, the sidepanal, the roof and the backplate with the frame version. Its for ¾ container only! Now, of course, you're wondering, which containers??? These ones, of course! → https://makerworld.com/de/collections/20585510-container-collection-1-64 This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out → https://makerworld.com/en/@Sir_Stigma/upload

Do you need a speed camera for your 1/64 diorama? Then I've got just the thing for you! I've made two different mounts: one for a road and one for a small concrete base. The choice is yours :-) No glue or support needed. Just print and have fun. This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

Do you need side panels for your 1/64 pavilion? I've made three different ones—in two different heights.You can simply replace the legs with the side panels.No glue or support needed. Just print and have fun. This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

This was a request from one of my followers. He really wanted a headlight adjustment tool. And here it is! The tool consists of three parts that simply click together. No glue or support needed. Just print and have fun. This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out my other constructions for 1/64 scale car for your diorama garage → https://makerworld.com/en/@Sir_Stigma/upload

Would you like to turn your container into a office? Here are the matching side panels! Just swap them out the side panels of your Container 1/64 & replace it with the construction/office container 1/64. (https://makerworld.com/de/models/2599747-3-4-container-1-64-scale-car-diorama-garage-30ft#profileId-2868734) These parts are only for the 1/64 30-foot container. This is a reupload of the model, so don't be surprised if you've seen it before :-D https://makerworld.com/en/@Sir_Stigma/upload

Would you like to turn your container into a office or a guardhouse? Here are the matching side panels! Just swap them out the side panels of your Container 1/64 and replace it with the construction/office container 1/64. (https://makerworld.com/de/models/712871-container-1-64-scale-for-car-diorama-garage#profileId-1532577) This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out → https://makerworld.com/en/@Sir_Stigma/upload

Want to convert your container into an office or a construction site container? I have the side panels that replace the doors and back panel. Now you’re probably wondering, which containers? These: https://makerworld.com/de/collections/20585510-container-collection-1-64 The parts fit ALL of my containers! This is a reupload of the model, so don't be surprised if you've seen it before :-D Check out my other constructions for 1/64 → https://makerworld.com/en/@Sir_Stigma/upload