Sir Reginald

LayerCake

Designed to just snap together without any additional hardware. Non destructive to the original charger by just coiling up the original cable in the main body and using a modified USB-C extension cable.This design has only been tested with the original watch band, which should be set to the tightest fitting when putting on the holder.<h3>Required Hardware</h3><ul><li>1 USB-C extension cable [<a href="https://www.amazon.de/gp/product/B09MS4HVYG" rel="nofollow">DE</a>]</li></ul>To make the USB-C cable fit through the holes in the Skadis pegboard the plastic shell of the female USB-C end needs to be removed.<h3>Notes</h3>Made with the personal version of Autodesk Fusion 360 therefore non commercial only.Source files included.

IKEA Skadis Google Pixel Watch Holder

Office Skadis

make 3D

These small Game boy stand print very fast and are a neat way to display all your Game Boys in your game room. The Game Boys are tilted slightly backwards to prevent them from falling.

Gameboy DMG-01 display stand

Video Game Storage

For the Fauna

TrendtB

Easily add labels to your Bambu Lab reusable spools, with a remaining filament estimator!Compatible with Make My Sign for custom labels.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_115305ad38652.gif"></figure>&nbsp;I absolutely love the Bambu Lab reusable spools, but you're either stuck with the original label, or have none at all.I also like the indicator on their labels that gives you an estimate of how much filament is remaining.&nbsp;So I designed this press-fit label holder for the spools!<h3>FEATURES</h3><ul><li>Indicator shows estimated remaining filament (200g, 400g, 600g, 800g)</li><li>Coloured zone for under 200g (a reminder to order more filament!)</li><li>Press-fit design snaps onto the spool</li><li>Compatible with AMS</li><li>Easily change labels for different materials</li></ul><h3>INCLUDED LABELS</h3>I've included many common material labels, all generated through Make My Sign.Just duplicate the labels you want from “Common Filamanet Labels” to the “Copy labels to print here” plate, and your project will remain organized.<ul><li>PLA</li><li>PLA Matte</li><li>PLA Tough</li><li>PLA Marble</li><li>PLA Metal</li><li>PLA Silk</li><li>PLA Sparkle</li><li>HTPLA</li><li>PLA-CF</li><li>PLA Aero</li><li>PLA Alu(minium)</li><li>PLA Steel</li><li>Polylite PLA</li><li>PETG</li><li>PETG-CF</li><li>ASA</li><li>ASA-CF</li><li>ABS</li><li>PA</li><li>PC</li><li>PA6</li><li>PAHT-CF</li><li>TPU95</li><li>Supp(ort) PLA</li><li>Supp(ort) PETG</li></ul>Label designs powered by Make My Sign from MakerWorld(<a target="_blank" href="http://makerworld.com/makerlab/MakeMySign" rel="nofollow noopener">makerworld.com/makerlab/MakeMySign</a>)<h3>MAKE YOUR OWN LABEL</h3>You can create your own labels in Make My Sign, as long as you use the following settings:<ul><li>Rectangle Base Plate, 1mm thick, 1mm corner radius, Hole: None</li><li>10mm Height</li><li>43mm Width</li></ul>I used Roboto font for the included labels at size 36. If you have a 0.2mm nozzle, I'd recommend using a smaller font if you want to fit more text on the label.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_8864da819adf2.png"><h3>MATERIAL CHOICE</h3>When choosing the material to print in, consider the environment your spool may be in.If you dry your materials, try to choose a filament that won't soften when your spool is in a dehydrator/heater.<ul><li>PLA is fine for PLA spools, and may be ok for PETG (not tested)</li><li>PETG and ABS are better for higher temp filaments.</li></ul>The example models used:<ul><li>Bambu Lab PLA Matte White</li><li>Bambu Lab PLA Basic Red</li><li>Bambu Lab PLA-CF</li></ul>&nbsp;<h3>REMOVAL</h3>If you want to remove the label holder for whatever reason, you can pop it off using a scraper. Wedge the blade underneath the holder and lift. If the pins break off, you can just push them through the holes in the spool using a small tool (e.g. hex key) and remove the debris.

Bambu Lab Spool Label - with indicator

Useful Printing Stuff

jonathan1987

A simple object for hanging towels in both the bathroom and kitchen or wherever you like. The central hook must be printed in TPU. Any type of TPU, including 95a, is suitable.Get creative with colors, unleash your imagination!

Simple Towel Holder

Useful Items

PhaseworksCA

Embrace the mystical allure of Umbreon with our smooth, flowing lines 3D print file. This elegant design depicts the sleek Pokémon in a series of graceful curves, offering a serene, artistic interpretation. Ideal for Pokémon fans and admirers of fluid, contemporary art, this file is a must-have for a touch of elegance in your collection&nbsp;<figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599333/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

Flowing Line Art Umbreon

Decor for Fun People

marciealana