Simply Models

Model Railway TT Gauge

Garden Railway

Single or Multilayer Helix in HO / OO Gauge.&nbsp;This is slightly off 1st Radius Track Setup, but was what i needed for my layout and I'm sharing for FREE. I used Peco flexi track code 80 for the rails and soldered across the fishplates to avoid kinks on the joints. This model will require minor alteration with a craft knife and small fill to assemble. It took me about 2hrs to make after printing all the bits, then i glued it together with super glue leaving just the track inserts unglued.&nbsp;If your looking at this you likely don't need instructions. Once you start printing it, it'll become pretty self explanatory. Please use the pictures as a guide for assembly.&nbsp;THIS IS A REMIX OF MY OTHER HELIX SHOULD YOU WANT THE STL FILES. PLEASE NOTE ITS MOSTLY RESCALING, BUT SOME ALTERATIONS WERE MADE TO THE ORIGNAL FILES AND THEY JUST WOULDNT PRINT ONCE SHRUNK.

Model Railway N Gauge Small Radius Single Or Multilayer Helix

Model Railway N Gauge

Wall_Art_3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThis Is Just the image from the slicer, after printing it will be much more charming!<figure class="image image_resized" style="width:27.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/416844/2023-12-27_4521197ff31d9.png"></figure><figure class="image image_resized" style="width:25.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/416844/2023-12-27_c9945b91a22b08.png"></figure>Swap Instructions: Start with Black At layer #9 swap to White for the rest.

Harley_Quinn_Marvel_Sexy_Woman (HueForge)

Wall Art

I designed this wire holder to assist on wiring model railways, to hold the wire above the track while pulling it through under the base board.&nbsp;It can be used for multitudes of things like this as its a very simple design.&nbsp;High Temp Plate recommended weather its PEI or Smooth.&nbsp;Print 2x File; Wire Holder 1x Wire real center pin.&nbsp;Bambu Studio; 0.2mm Strength layers, Sparse infill density; Gyroid, Supports; OFF, Brim OFF for Wire holder and ON for Wire real center pin.

Wire Real Holder - Model railway wiring assistant

Model Railway

Designed in house at Simply Models as a simple printable station platform for OO Gauge 1/76 Scale Model Railways.&nbsp;Print Sizes For the Main PlatformThe Straight Platform is L250 x W67.5 x H19mm.The Entry Ramp is L109 x W67.5 x H0.1-19mm.The Platform End is L50 x W67.5 x H19mm.Station Area L250 x W156 x H19mm.The detailing wires are printed at 250mm but can be cut very easy.&nbsp;The Slimmer Platforms areStraight 250 x 32 x 19mm.Platform End 50 x 32 x 19mm.&nbsp;Straight L250 x W40 x H19mm.Platform End L50 x W40 x H19mm.&nbsp;&nbsp;Printed on Bambu Lab X1 with 2x AMS units.&nbsp;Ideal SetupMake sure your bed has been cleaned correctly. Ideally warm water and dawn dish soap.Bambu Textured PEI Plate. (Except for the Detailing platform wires, this requires smooth plate)Turn OFF AUX Fan for ALL colours.Leave the printer glass lid OFF.Only Tested to print in PLA.&nbsp;Required ColoursPLA; Yellow, Beige, White, Grey, Black, Matte Red.PLA-CF; Dark Grey (Top tarmac)Pictured Platforms used bambu filament.&nbsp;STL file's are provided along with 3MF Direct Print.

Model Railway OO Gauge Station Platform With Entry Ramp and Platform End

Model Railway OO Gauge

holonda3d

PS5 Controller Stand, No supports needed!, Happy printing!

PS5 Controller Stand

Console

Stag 3D

Fun sign decoration to put up around the house for Christmas. &nbsp;For best finish print with an AMS, or alternatively print and paint.

Santa Sign Christmas Decoration

Xmas

Nethuntr

This is a holder for the Philips Hue bridge. I just used some strong mounting tape to slap it on the wall. In my case, it cannot fall very far - if the fall height would be larger, I'd use two screws.

Hue Holder

Philips Hue

Sniken

A coaster I made for fun in Fusion 360Its 3mm thick, 100mm in diameter ≈ 4 inches and uses the colors; white, black and red&nbsp;I make mine with 100% infill as it adds some weight to it without adding that big amount of print time

Santa Ho's Coaster - 100mm ≈ 4in.

Costers

10x BambuLab Plate Holder&nbsp;BambuLab 10pc Build plate cradle.Only 250g, 6hr 45min print time.&nbsp;Vertical PositionWidth 53mmHeight 272mmDepth 256mm (Without plates)&nbsp;Each Plate Protrudes 1.5mm more then the previous layer. &nbsp;Requires; 8x M3 25mm Head Screws - Please see last picture.

Compact 10pc BambuLab Build Plate Holder Caddy Cradle - Only 250g

Storage Box

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

Games

Designed in house at Simply Models, Orignally made to help organise our own chaos.&nbsp;The Makita LXT Battery fit fantastically.

Makita 6 LXT Battery Cradle Carrier Holder Storage

Tools

These shelves are designed to hold the boxed parts from the bambu store and create an organised display. The units can be wall mounted on just placed on the workbench.&nbsp;Material; Recommended ABS, Other material is fine.&nbsp;Build Plate; Tested on both PEI & High Temp Plate.&nbsp;Changes in Bambu Studio; 0.2mm Standard Layer Height, Sparse Infill Pattern; Gyroid.Brim; OFF, Clean plate prior.Auto Arrange Object.Bottom Layers; 5Top Layers; 5

Bambu Lab - Wall Mounted Parts Storage shelves

This Hydrometer holder can either sit at your desk or be screw mounted under a shelf.