SilverStreakXIV

Pandart3D

Have you been printing for a long time now and have your house invaded by waste?the solution is ready.here&#39;s the tree to recycle them!it is created in 2 versions, one with baskets instead of the foliage and the other with the bonsai foliage.to print and keep on your desk in all sizes to accommodate even more material!&nbsp;stampate ormai da parecchio tempo e avete la casa invasa dagli spurghi?la soluzione è pronta.ecco l&#39;albero per reciclarli!è creato in 2 versioni, una con dei cestini al posto delle chiome e l&#39;altro con le chiome del bonsai.da stampare e tenere sulla scrivania in tutte le dimensioni per accogliere ancora più materiale!&nbsp;

recycling waste tree bonsai edition

Garden

qwiktune

Another flexible dinosaur fidget toy, but this time the Brachiosaurus! This one broken in to two pieces for easier printing, which is then just assembled by snapping the neck to the body.&nbsp;

Flexible Brachiosaurus Fidget Toy

Flexi

Sakul

🎵Fast and simple build of a working Kalimba with 17 keys.🎵 In addition to the printed parts, you only need a kalimba key set like this:De: <a target="_blank" href="https://www.amazon.de/gp/product/B0BKNZPFTM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow noopener">Kalimba Set</a>Us: <a target="_blank" href="https://www.amazon.com/Liyafy-Kalimba-Bridge-Tuning-Repairing/dp/B0895L9MYS/ref=sr_1_2?crid=2LA72IVI5G5FQ&keywords=kalimba+diy&qid=1708288889&sprefix=kalimba+di%2Caps%2C339&sr=8-2" rel="nofollow noopener">Kalimba Set</a> I also added a version where an amplifier can be added, the part is included in the raw files. How to build: Use filament with good layer adhesion, the keys will add some tension to the top part, so no silk filament. Glue the two bridges to the top part and screw the keybar on loosely. Slide in the keys, but leave out the ones that cover the screws.Now screw the keybar on tightly.Push the left-out keys in afterward, the keys need to be bent into place a little bit. I used a flat screwdriver for it, and it worked pretty well. When you are finished, connect the bottom and top part together.To create a well-resonating body, the two parts need to be joined permanently using some CA glue. Lastly, you need to tune the Kalimba.You can find many tutorials online on how to do this with a smartphone app.This is very important to make the Kalimba sound good, don't skip it. Happy playing!

Kalimba

Instruments

司天灵台

第谷纪限仪（Tycho Brahe's sextant）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/653895/2024-03-07_5b6c46935f66.png"></figure>Brahe's illustration of his <a target="_blank" href="https://en.wikipedia.org/wiki/Sextant" rel="nofollow noopener">sextant</a>, from his <a target="_blank" href="https://en.wikipedia.org/wiki/Star_catalogue" rel="nofollow noopener">star catalogue</a> <a target="_blank" href="https://en.wikipedia.org/w/index.php?title=Astronomiae_instauratae_mechanica&action=edit&redlink=1" rel="nofollow noopener">Astronomiae instauratae mechanica</a> (1602)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/653895/2024-03-07_5b0e9df8b908b.png"></figure>Stjerneborg ("Star Castle" in English) was <a target="_blank" href="https://en.wikipedia.org/wiki/Tycho_Brahe" rel="nofollow noopener">Tycho Brahe</a>'s underground <a target="_blank" href="https://en.wikipedia.org/wiki/Observatory" rel="nofollow noopener">observatory</a> next to his palace-observatory <a target="_blank" href="https://en.wikipedia.org/wiki/Uraniborg" rel="nofollow noopener">Uraniborg</a>, located on the island of <a target="_blank" href="https://en.wikipedia.org/wiki/Ven_(Sweden)" rel="nofollow noopener">Ven</a> in the <a target="_blank" href="https://en.wikipedia.org/wiki/%C3%96resund" rel="nofollow noopener">Öresund</a> between Denmark and Sweden.Tycho Brahe built it circa 1581. He wrote: "My purpose was partly to have placed some of the most important instruments securely and firmly in order that they should not be exposed to the disturbing influence of the wind, and should be easier to use, partly to separate my collaborators when there were several with me at the same time, and have some of them make observations in the castle itself, others in these cellars, in order that they should not get in the way of each other or compare their observations before I wanted this."<a target="_blank" href="https://en.wikipedia.org/wiki/Stjerneborg#cite_note-AIM-1" rel="nofollow noopener">[1]</a> He named it Stiernburg in vernacular or Stellæburgus in <a target="_blank" href="https://en.wikipedia.org/wiki/Latin" rel="nofollow noopener">Latin</a>. Both the Danish and Latin names mean "castle of the stars".The underground portions of the observatory were excavated in the 1950s and are today fitted with a roof approximating the original one. The chambers now house a multimedia show open to the public.0&nbsp;&nbsp; <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/653895/2024-03-07_bb25a7236946b.png"></figure>Engraving of the above ground parts of Tycho Brahe's underground observatory <a target="_blank" href="https://en.wikipedia.org/wiki/Stjerneborg" rel="nofollow noopener">Stjerneborg</a>

第谷纪限仪（Tycho Brahe's sextant）

Functional

christofer.jh

🔬 Discover Poop Chemistry: Showcase Your Filament Creations in Style! 🔬&nbsp;Elevate your 3D printing game with Poop Chemistry – the ultimate modular system designed to beautifully display your filament (extra) creations. Crafted with precision and innovation, Poop Chemistry lets you turn your filament poop into eye-catching masterpieces.&nbsp;Each modular flask is meticulously designed to hold your filament poop with elegance and charm. Made to perfection with translucent filament, these flasks create a stunning visual effect, showcasing the intricate details and colors of your creations in all their glory.&nbsp;Whether you&#39;re a seasoned 3D printing enthusiast or just starting out, Poop Chemistry offers endless possibilities for creativity and expression. Mix and match different flasks to create your own unique arrangements, or proudly display individual pieces as standalone works of art.&nbsp;Perfect for home decor, office spaces, or as conversation starters at events, Poop Chemistry adds a touch of sophistication to any environment. Plus, with its durable and high-quality construction, your filament poop will be securely displayed for years to come.&nbsp;Experience the beauty of filament art like never before with Poop Chemistry.Unleash your creativity and transform your prints waste into stunning showcases of innovation and style.&nbsp;Out of flask for the fresh poop? No problem, just print some more flask and build a bigger stand! You can even use the big rod to combine multiple stands.&nbsp;Print yours today and start displaying your filament creations with pride! 💩🔬&nbsp;The flasks are printed i Vase Mode.Tape is not needed, in the pictures I used a failed version.

Poop Chemistry 

Vases

3D Print Bros

<a target="_blank" href="https://www.tiktok.com/@brady_meets_world" rel="nofollow noopener">@bradyprints on Tiktok</a> challenged the 3D printing community to print the popular <a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">Gyro Fidget Spinner</a> as big as they can, but I couldn&#39;t help but notice there is one glaring issue - as you scale up the model, the tolerances between the spinning rings also scale up, resulting in a wobbly spinner.&nbsp;To combat this, I redesigned it with updated tolerances for a smooth spinning experience. This model is 300% scale of the <a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">original</a>! This behemoth spinner is a true statement piece. Perfect for any coffee table and a great conversation starter. Even looks awesome hung on the wall! Not to mention it&#39;s strangely addicting to spin.&nbsp;&nbsp;<a target="_blank" href="https://cults3d.com/en/3d-model/game/commercial-license-jumbo-gyro-fidget-spinner-v2" rel="nofollow noopener">Onetime payment commercial license available on Cults3D here!</a>  Don&#39;t forget to print the pocket-sized version for fidgeting on-the-go here:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">Gyro Fidget Spinner V2 by 3DPrintBros - MakerWorld</a> &nbsp;And if that&#39;s still too big for you, check out the Micro Gyro:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro Gyro Fidget Spinner by 3D Print Bros - MakerWorld</a><figure class="image image_resized" style="width:34.82%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000393051/design/2024-04-19_e3cf893471adc.gif"></figure>— &nbsp;&nbsp;Now that you&#39;ve printed this glorious piece, put it on display with the perfect stand designed by Stickler:  <a target="_blank" href="https://makerworld.com/en/models/423233#profileId-326399" rel="nofollow noopener">Display Stand - Jumbo Gyro Fidget Spinner by Stickler - MakerWorld</a><figure class="image image_resized" style="width:62.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000393051/design/2024-04-11_9520a9b47d052.jpg"></figure>

Jumbo Gyro Fidget Spinner

Fidget Toys

🏓Table Tennis Rackets🏓 With all the airless ping pong balls on the website, it's a no brainer that we need some 3d printed table tennis rackets.These rackets are fully 3d printed in pla and tpu. How to build: Use the pins provided for easy alignment and glue the handle together. <img src="https://makerworld.bblmw.com/makerworld/draft/733313/2024-03-19_df61ab35a54c9.jpg"> Glue the rubber parts to both sides of the bat, sand the parts beforehand for better adhesion. To get a realistic feel, add a layer of foam under the rubber part. If you don't have foam, you can also use cork or print the foam part in tpu, I included it in the print profile. <figure class="image image_resized" style="width:50.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/733313/2024-03-19_77bf5395c8778.jpg"></figure>

Table Tennis Racket

LoboCNC

This phone stand with a nautical flair lets you both adjust the tilt angle and roll your phone left or right to landscape mode. The spring-loaded clamp securely grasps your phone so you can poke at it without it rattling around in the stand. On most phones, the speakers, cameras, buttons and jacks are all unobstructed.Requires 2 small rubber bands: one for tensioning the roll-joint to give you a smooth, uniform amount of friction, and a second for pulling the arms tight against your phone. Just pinch the ends of the two arms together to insert/release your phone. To tilt the phone, just lift the wedge out of the base and re-seat it at the desired angle. Because of the shallow wedge angle, friction holds the wedge securely in the base.This is sized for a fairly large (75 - 82mm wide) phone. You can scale everything down for smaller phones.Printed in PLA. The two arm parts need supports turned on, but the everything else prints without supports in the orientations shown.Assembly Instructions<ol><li>Slide the wedge into the base so that the circular knob is facing upward and is more or less horizontal. </li><li>Gently flex the arms of the Clamp Center apart and slip it over the knob. The little notches in the ends of the arms should be facing upward. </li><li>Double over a small rubber band and loop it over the ends of the arms of the Clamp Center. It should fit in the slots at the end. The Clamp Center should rotate smoothly on the knob. Adjust the rubber band tension (more or fewer loops) to get the level of friction you like. (See photo 6)</li><li>Each Clamp Arm (R & L) has a circular pocket that fits over the round nubs on the Clamp Center. When in place, the gear teeth should mesh as shown in the 4th photo.</li><li>Double over another rubber band and loop one end over the little stub sticking out just below the notch on the right Clamp Arm. Stretch the band (both sides) through the gaps on the right and left arms, and then hook the other end over the matching stub on the left arm. The entire rubber band should be stretched across the top side of the arms, which puts a slight inward torque on the arms which keeps the gears aligned. (See photo 7)</li></ol>

Sextant Tilt/Roll Phone Cradle

Stands

&nbsp;Brighten up your office breaks with this fun mini table foosball game.A fully functional table soccer set to challenge your colleagues. All you need, aside from the printed parts, are 20 M3x10 and 12 M3x20 screws, and some CA Glue. For assembly, print out all the parts, and start by gluing the playfield into the base. Screw the legs and the ball catchers to the base; you can screw them directly into the plastic, as it will be plenty strong. <figure class="image image_resized" style="width: 61.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_6c8651f7c1e8.jpg"></figure> Glue the side caps into the base, slide the rods in from the side, and also stick the figurines on the rods. The figurines will be fixed in place using the M3x10 screws. All the TPU parts can now be attached using CA Glue. Glue the handles and end caps on the rods, also attach the TPU feet to the legs. The ball is made by gluing the two halves together.<figure class="image image_resized" style="width: 34.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_3727bab3bdd4.jpg"></figure>Lastly, slide the goal indicator over the display shield and then attach it to the base. Have fun playing!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>  Check out my newest Uploads: <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-06-04_09fc049f7c6e.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-05-01_6d8b75eefb4a4.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Office Mini Desk Foosball Table

Games

LabLab

This whimsical and humorous 2D design features three curious cats 🐈 peeking around the corner, with their head tilted and a mischievous expression on its face. &nbsp;😼 The cat&#39;s eyes are wide and inquisitive, as if it&#39;s trying to catch someone in the act of using the bathroom. 🚽&nbsp;The text &#34;Are you pooping?&#34; is prominently displayed in a playful, hand-drawn font, adding to the lighthearted and slightly cheeky tone of the design. 😂 The cat&#39;s body is partially obscured by the wall or corner it&#39;s peeking around, leaving just its head and one paw visible.The design is suitable for printing on a variety of materials, such as signs, wall hangings, or even bathroom accessories like hand towels or soap dishes. 🛀 It would make a fun and quirky addition to any bathroom or living space, especially for cat lovers or those with a sense of humor. 😹&nbsp;The design is a vector file, ensuring high-quality printing and the ability to scale the image to different sizes without losing resolution. 🖨️ It can be printed using FDM (Fused Deposition Modeling) technology, making it suitable for 3D printing on various materials like PLA or PETG. 3D⏩&nbsp;Check out my profile for more models!

Cat Bathroom Sign - Are you pooping?

Wall Art

Simple and easy Pen Holder in the shape of a Revolver Drum.

Revolver Drum Pen Holder

Organizers

Deus Cat

Hey everyone! The Last Airbender was always one of my favourite TV shows, so as a fan, I have created Appa for you to print!I hope you enjoy it, feel free to drop a comment or a like if you do!&nbsp;Also, if you like my work or want a commercial license for any of my models, feel free to follow on Patreon, or on Cults3D:&nbsp;<a target="_blank" href="https://www.patreon.com/BT3DDeusCat" rel="nofollow noopener">https://www.patreon.com/BT3DDeusCat</a> <a target="_blank" href="https://cults3d.com/en/3d-model/art/appa-from-the-last-airbender-colourless" rel="nofollow noopener">https://cults3d.com/en/3d-model/art/appa-from-the-last-airbender-colourless</a>

Appa from The Last Airbender

Animals

Zurlingo-3D

<h2>Marshall Mini Stack Smartphone Amplifier/Stand</h2>&nbsp;Features:<ul><li>A Scale Replica Of A Marshall JCM800 Head And Cab</li><li>80mm x 15mm Phone Slot</li><li>Functional Speaker Grill</li><li>Bass Expansion Chamber</li><li>Downward Facing Ports</li><li>Separated Into Parts For Easy Multicolour Printing</li><li>Greatly Improved Audio Quality Over Stock Phone Speaker</li><li>Much Better Low/Mid Frequency Response With A Noticeable Bass Boost</li><li>Much More Directed Sound Projection</li><li>Master Volume is set to 11 as a nod to Spinal Tap </li></ul><figure class="media"></figure>I have separated this model into separate print profiles for easy printing. This will save you having to adjust settings within Bambu Studio when using a 0.2mm nozzle. The only thing you need to do is physically swap nozzle and change the nozzle type on the printer itself :)&nbsp;Assembly:<ul><li>All parts must be glued together. It requires the smallest amount of glue to hold the parts in place, so be cautious not to use too much.</li><li>The logos have a recessed impression in the speaker grills of the main body, for easy alignment.</li></ul>&nbsp;Extra Info:<ul><li>The front panel and white edging strips must be printed with a 0.2mm nozzle to retain as much quality as possible. At this scale the text is barely readable, but does still give the desired effect. You can of course scale the amp up enough to retain all of the text if you want to :)</li></ul>&nbsp;<ul><li>The main body will print with no support (The example print was printed this way) BUT this does require two 80mm un-supported bridges and some clean up with a sharp craft knife post print. This is in order to get a nice fit with the edging strips.</li></ul>&nbsp;<ul><li>The feet are important to the overall sound quality. If the amp is rested directly on a flat surface then there is nowhere for the ports to project the sound. You can also change the EQ of the sound by adjusting this height (increase Z axis scale of the feet only, in Bambu studio.)</li></ul>&nbsp;I really hope you like this one! - It&#39;s been a fair amount of work to achieve what I wanted with this design and I&#39;m really happy with how it turned out :)&nbsp;Please rate and review your printing experience&nbsp;Don&#39;t forget to add a picture of your amp to the comments below :P&nbsp;Thanks for looking!<h3> </h3>Please also check out my latest mini amp here:<a target="_blank" href="https://makerworld.com/en/models/513021#profileId-429098" rel="nofollow noopener">https://makerworld.com/en/models/513021#profileId-429098</a> &nbsp;<img class="image_resized" style="width: 48.12%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415129/design/2024-06-26_961bc99b784b7.png">&nbsp;

Marshall Mini Stack Smartphone Amplifier/Stand

Kits

Nabes Teban

My version of the Katara necklace pendant from Avatar the last airbender, made for my niece who loved the Netflix series. Inspired by a glass fanmade jewel from trejayne.com found on google image that I thought was beautiful, but closer to the original version. Printed with bambulab PLA basic Gold and matte Ice blue.

Katara's necklace from Avatar the last airbender

Jewelry

普朗克-凯

<h2>Four Noble Persons traditional Chinese lantern（四君子中国传统灯笼）</h2><h3> </h3><h3>Introduction(简介)</h3>The "Four Gentlemen" refer to the following plants: plum blossom, orchid, bamboo, and chrysanthemum. They are regarded as the "Four Gentlemen" with each representing a specific quality: pride, elegance, modesty, and leisure, respectively. Referred to as the "Four Gentlemen ," they symbolize the aspirations of the Chinese people and are commonly depicted in poems, writings, and artworks as an allegory for various virtues.You can see their figures on this lantern, and I hope you also like them. Wishing you a delightful time.&nbsp;【“四君子”分别是指：梅花、兰花、翠竹、菊花。被人称为“四君子”，其品质分别是：傲、幽、澹、逸。“四君子”成为中国人借物喻志的象征，也是咏物诗文和艺人字画中常见的题材。你可以在此灯笼上看到它们的身影，希望你们也喜欢它们，祝你们玩的愉快。】<h3> </h3><h3>Printing Instructions（打印注意事项）</h3>To illuminate the lantern, you need to have the LED Lamp Kit-001. If you have already printed the LED Lamp 001, you can disregard the following content.<ul><li>Purchase LED Lamp Kit-001</li><li>Search for the model of LED Lamp Kit-001 on MakerWorld. You only need to print the LED base.</li></ul><figure class="image image_resized" style="width:26.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_398a70a57cdbd.png"></figure>&nbsp;【为了让灯笼亮起来，您需要拥有001号LED灯套件，如果你已经打印了LED Lamp 001那么下面的内容可以忽略。<ul><li>购买001号LED灯</li><li>在makerwolrd里搜索001号LED灯套件模型，只需要打印led底座即可】</li></ul>&nbsp;I really like the built-in textured PEI print bed of the P1S. If the model's outer surface is flat, I often directly print it on the print bed without using a raft, and this allows me to achieve a good surface finish without activating the bed heating. When printing, please:<ul><li>Clean the oil stains on the print bed to prevent poor adhesion of the printed parts.</li><li>When printing the first layer, I often activate the silent mode, significantly increasing the probability of achieving a perfect first layer.</li></ul><figure class="image image_resized" style="width:50.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_aea6fd67f8893.png"></figure>【我非常喜欢P1S自带的纹理PEI打印板，如果模型的外表面是平面的话，我经常把外表面就直接打在打印板上，这样就不需要开启熨烫，就能获得比较好的表面，打印时请：<ul><li>清理打印板上的油污，避免打印板粘不住打印件</li><li>打印第一层时，我经常开启静音模式，大大提高获得完美首层的概率】</li></ul><h3> </h3><h3>Assembly Instructions（组装注意事项）</h3>This is everything printed out. You also need to prepare a roll of double-sided tape.<figure class="image image_resized" style="width:75.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_882b71f8a1db4.png"></figure>【这是打印出来的所有东西，您还需要准备一卷双面胶】&nbsp;Step 1: Affix the 3D image onto the red border, paying attention to the orientation.<figure class="image image_resized" style="width:76.43%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_76ba013d00ea4.png"></figure><figure class="image image_resized" style="width:75.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_0b6299a48ffde.png"></figure><figure class="image image_resized" style="width:75.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_950d6f10ba1b3.png"></figure>【第一步：将立体图片贴在红色边框上，请注意方向】&nbsp; Step 2: Install the LED light.It might be a bit tight; you may need to apply some force.<figure class="image image_resized" style="width:76.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_bdd9ada34c332.png"></figure><figure class="image image_resized" style="width:75.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_6cbc5dae620c4.png"></figure><figure class="image image_resized" style="width:75.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_f78c90efd42e2.png"></figure>【第二步：安装led灯，可能有些紧，需要用力】 Step 3: Insert the red border into the base; you may need to apply some force..<figure class="image image_resized" style="width:74.32%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_1383af3e608e8.png"></figure><figure class="image image_resized" style="width:77.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_e8f70a777e87d.png"></figure>【第三步：将红色边框插在底座上,可能有些紧，需要用力】&nbsp; Step 4: Install the lantern top. It might be a bit tight, so you may need to apply some force.&nbsp;<figure class="image image_resized" style="width:76.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_e8ad12679e802.png"></figure>【第四步：安装灯笼顶,可能有些紧，需要用力】&nbsp; Mission accomplished!<figure class="image image_resized" style="width:76.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_54865a1899ce4.png"></figure>&nbsp;【大功告成】&nbsp;&nbsp;&nbsp;

Four Noble Persons traditional Chinese lantern（四君子中国传统灯笼）

Lamps

AeonJoey

<h2>The Legend of Zelda - Map of Hyrule, from the NES version of Zelda.</h2>Note: this is a model that has been abandoned by its creator, DarkApollo on Thingiverse. Its original URL was <a target="_blank" href="https://www.thingiverse.com/thing:2138498" rel="nofollow noopener">https://www.thingiverse.com/thing:2138498</a> though because it is a deadlink it cannot be referenced as a remix with proper attribution. The original had the same CC/BY/NC Creative Commons license so I passed that along.&nbsp;<h3>Modifications and Updates to the original:</h3><ul><li>3MF build plates arranged specifically to allow printing with a single AMS, using 4-colors at a time. See more about this below.</li><li>The entire map has been colorized in Bambu Studio</li><li>Custom direct painting in Bambu Studio to ensure no color leak-thru and best presentation (this took weeks)</li><li>Numerous CAD replacements and repairs for too-delicate-to-print elements. (DO NOT ‘SPLIT TO OBJECTS’ IT WILL RUIN THE MODEL!)</li><li>Each ‘room’ of the overworld map has been separated by 0.1mm to allow individual printing.</li><li>Settings tuned for fastest possible print while maintaining detail of every element. This took a LOT of trial and error It is extremely important to use the .3MF as-is to achieve the same results as the photos, setting the layer height to more fine quality results in too-small elements falling off the print and spaghetti-fying.</li><li>Frame in Print Profiles.  </li></ul><h3>How to print:</h3><ol><li>HIGHLY recommended to use the Textured PEI plate for this print, it allows release of the parts after letting them sit for a few minutes very easiliy. The Smooth PEI plate and cool plates tended to stick when removing, and gluestick makes a mess with items this small.</li><li>Each plate&#39;s prime-tower preview shows the filament colors you&#39;ll need per print<img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-02_fc6ee1cdbcb8b8.png"></li><li>Load up the first 4-colors, and then slice and print, continue for each plate.</li><li>Print the PDF below on a regular color printer - to use as a template to align the parts,<ol><li>Caution against gluing the parts directly to this page: you&#39;ll want to wait until you have everything printed first.</li></ol></li><li>Take photos and post them here!</li></ol><h3>Colors Used:</h3><ul><li>PolyMaker PolyTerra PLA - Sandstone (gives a nice sandy appearance but any beige will do)</li><li>Inland PLA+ - White (this opaque white PLA, also known as a ‘cold white’ blocks colors from bleeding through)</li><li>Bambu PLA Basic - Blue</li><li>Bambu PLA Matte - Ash Gray</li><li>Bambu PLA Basic - Bambu Green</li><li>Bambu PLA Matte - Black</li><li>Bambu PLA Basic - Brown</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-02_a2ddd7611d3498.png">Though 7 colors are used, you only need a single AMS unit to print 4 of them at a time per build-plate.<h3> </h3><h3>Frame:</h3><ul><li>Frame in Print Profiles, prints on X1/P1/A1 series as 2 pieces, .STL in raw files if anyone wants to recut for A1 mini</li><li>Snaps together and fits all pieces</li><li>Designed to fit inside of a 12.5x5.5 inch Shadow box picture frame like this one: <a target="_blank" href="https://www.amazon.com/gp/product/B0CRBBM7NP/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0CRBBM7NP/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&amp;th=1</a></li><li>Frame also uses Hilbert pattern for top surfaces, to achieve ‘lattice’ like appearance, change to your liking.</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-03_fb9a3c07a436a.jpeg"></li><li><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-03_8eb8dab273218.jpeg"></li><li><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-03_f92d130623b0e8.jpeg"></li></ul><h3> </h3><h3>Display Case: </h3>To fit inside of this display case: <a target="_blank" href="https://a.co/d/3qGe2rY" rel="nofollow noopener">https://a.co/d/3qGe2rY</a>, there is an additional print profile labeled ‘angled’. It sits at 20-degrees tilted, and has legs to prop it up that fit in holes in the 4 corners. The additional flat piece is to glue on the bottom to keep it flat, or else it would split in half on it&#39;s own weight.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-09_8e2a2f1c239e5.jpeg"></figure>&nbsp;<h3>FAQs:</h3><ul><li>What is that pattern on the top of everything?<ul><li>That is called the ‘Hilbert’ pattern, and can be changed in the Global settings to something else if prefered, this pattern appears more ‘random’ at this scale adding to more of a ‘rough’ look for the water, trees, terrain and ground.</li></ul></li><li>What if I have more than 1 AMS? I can print all 7 colors<ul><li>I&#39;m very jealous, haha, a full color version is forthcoming as a print profile soon.</li></ul></li><li>The little tree trunks look like fuzz while printing, what&#39;s going on?<ul><li>During printing a lot of the under-sides of tree-lines look like they are failing, let them finish, they provide a proper amount of adhesion and elevation for the tree-lines. Some may fall off after printing, but they will be completely intact when done. Use CA glue to re-adhere them to the ‘floor’ if they fall off during assembly</li></ul></li><li>There&#39;s whisps everywhere!<ul><li>You must use DRY filament to print this, at least below 30%, otherwise stringing will occur. For minor stringing, you can use a butane torch (like a creme brulee torch) to very very quickly, swipe past and they usually disappear. But be careful, you might melt a tree or two! best to use fine-tipped tweezers to pluck any whisps.</li></ul></li><li>Why does it look like there are 2 blues in the photos?<ul><li>It&#39;s the same Bambu PLA basic, but I had to switch to the Textured PEI plate for easier release, interestingly, that blue shows up darker when printed on the textured plate vs the smooth. go figure.</li></ul></li><li>Do I really need the Textured PEI plate?<ul><li>If you use a smooth sheet, just have a fine edged scraper or spudger to gently lift each piece, because you&#39;ll be flexing them, it may destroy them while trying to remove. Let them cool at least 5-10 minutes if you use a smooth plate before attempting to remove.</li></ul></li><li>I want this bigger/smaller!<ul><li>Please do! and post your results for others as a print profile!</li></ul></li><li>Where did this come from?<ul><li>An individual that goes by DarkApollo on Thingiverse. Its original URL was <a target="_blank" href="https://www.thingiverse.com/thing:2138498" rel="nofollow noopener">https://www.thingiverse.com/thing:2138498</a>. If you find a proper attributed post by DarkApollo, please let me know so that they can be properly attributed as a remix here as well. My contributions are primarily to be able to print this on a Bambu printer with an AMS without all of the trial and error I had to go through.</li></ul></li><li>How can I glue this together?<ul><li>Use ‘CA’ glue, search amazon for ‘CA glue’ or ask your local hobby or craft shop.</li></ul></li></ul>&nbsp;&nbsp;

Legend of Zelda Overworld Map for 4-Color AMS

Gifts

FallenAngel

I am planning to make Pokémon models which are not found in general base of less popularity. This model has 3 different cuts which supports multi color option. Option 1 - Flat base Option 2 - Part is divided in two pieces so that no supports are needed Option 3 - Single piece which requires support

Bronzor

Statues

Dr.  J. Ma

If you like this model, please consider boosting it — your support inspires more creations!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-17_b316adea6f575.png">----------------------------<h2>Intro</h2>The Breeze Model X is the latest addition to the &#34;Breeze&#34; series of RC planes.&nbsp;<ul><li>Customizable upgrades</li><li>Lightweight yet strong</li><li>Modular design</li><li>SUB250 compliant</li><li>Few parts to assemble</li><li>Completely FREE to download</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-12_2073f045ac682.png"></figure>License:Breeze Model X is available for free download and non-commercial use only when downloaded exclusively from MakerWorld.com. Please contact me for authorization if you wish to use it beyond the Standard Digital File License.&nbsp;As I will continuously enhance this model base on your feedback, please revisit here for updates.&nbsp;The Breeze Model X is a SUB250 modular flying wing, designed to weigh less than 250g, allowing for easy compliance with aviation regulations in many countries. This design means you can enjoy flying in most regions without the need for a remote identification tag. However, it&#39;s important to verify your local laws and ensure you fly in safe, unpopulated areas since it can go very fast.&nbsp;It flys notable responsiveness, offering a firm yet reactive feel, which suits aerobatic maneuvers. It can rolls and loops easily.Additionally, it features an efficient wingfoil, achieving a tested glide ratio close to 12 (which means it descends 1 meter for every 12 meters it glides).&nbsp;<h3>Flying characteristics:</h3><blockquote>In my fly test.</blockquote>Wing Span: 560mm (incl. winglets)RTF weight: ~250gBattery: 3S 1300mAhMotor: 1406 3300kvProp: Gemfan 3inch 3052 (high pitch blades for speed)Glide Ratio: ~12:1 @ 12m/sStall speed: 7.5m/s or 27km/hCruise Speed: 15m/s or 54km/hTop speed: 30m/s or 108km/hCruise throttle: 50%Cruise Time: 45minThurst to weight ratio: 0.9&nbsp;Print Time: ~10 Hours vase mode PLA-Aero or LW-PLA&nbsp;--Note : Per user feedbacks, if you want to print with non-foaming materials such as PETG, you will need a 3S 18650 pack to get the COG right (normal lipo is too thick for the fuselage and the canopy wont fit). Prepare for heavier wing-load (stall speed will be increased massively)&nbsp;This extended nose parts allows you to fit smaller battery <figure class="image image-style-side image_resized" style="width: 36.66%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-05-24_891c9f2470cf2.png"></figure>while still making COG right. Thanks to the author<a target="_blank" href="https://makerworld.com/en/models/465958#profileId-374847" rel="nofollow noopener">https://makerworld.com/en/models/465958#profileId-374847</a><h4> </h4><h4> </h4><h4> </h4><h4> </h4><h4>BOM besides printable parts and Fly Controller</h4><ul><li>5 x 300mm Carbon Tube x 1</li><li>EMAX 9g servo x 2</li><li>Push rod 1mm to 1.2mm diameter, at least 11cm length x 2</li><li>M3 5mm Nylon screw x 3 (Optional)</li><li>M3 thread insert x 3 (Optional)</li></ul>&nbsp;Recommended Filaments<a target="_blank" href="https://us.store.bambulab.com/products/asa-aero" rel="nofollow noopener">Bambu Lab ASA-Aero</a>: https://us.store.bambulab.com/products/asa-aero<a target="_blank" href="https://us.store.bambulab.com/products/pla-aero" rel="nofollow noopener">Bambu Lab PLA-Aero</a>: https://us.store.bambulab.com/products/pla-aero&nbsp;<h4>Tuning before mainden</h4><ul><li>Mixer setting:</li></ul>Pitch 60% Roll 30% – this is critical, because this plane has large control surface, and roll is too sensitive.&nbsp;<ul><li>INAV PID setting (under testing):</li></ul>I am still finding a good PID, will update you here. Mean while, please reduce roll PIDFF rate which the default values are really unstable.Old setting 2024/04/13:<ul><li>pitch rate: 150 deg/sec</li><li>roll rate: 310 deg/sec</li><li>Lower all Roll PID by half. Set roll FF to 60.</li><li>Lower all Pitch PID by 25%. Set pitch FF to 80.</li><li>(Important) Enable advance PID and lower “level strength” to 8.</li></ul>Current suggestion 2024/05/03:<blockquote># Mixer: servo mixer smix resetsmix 0 1 0 -30 0 -1 smix 1 1 1 -60 0 -1 smix 2 2 0 -30 0 -1 smix 3 2 1 60 0 -1# PID and rate setting set fw_p_pitch = 10 set fw_i_pitch = 10 set fw_d_pitch = 5 set fw_ff_pitch = 70 set fw_p_roll = 8 set fw_i_roll = 5 set fw_d_roll = 5 set fw_ff_roll = 51 set fw_p_level = 10 set roll_rate = 30 set pitch_rate = 17# save configuration save  </blockquote>&nbsp;&nbsp;&nbsp;Please give suggestion if you have better turning.Once it is stable, I will export the setting cmd, and you could apply it in one go.&nbsp;&nbsp;&nbsp;/*-----------------------------------------*/ <h2>Design Principle</h2><figure class="media"></figure>&nbsp;Alternative source (Chinese via bilibili):<figure class="media"><oembed url="https://www.bilibili.com/video/BV1fT421171k/"></oembed></figure>&nbsp;&nbsp;3D printed RC planes often seem stiff and easy to break, getting damaged from small crashes that foam planes usually handle well. To fix this in my design, I focused on two main ideas:<ul><li>Lightweight and Strong – be SUB250 and resistance to small crash.</li><li>Modular design – easy to swap broken modules and customized options.</li></ul>Also, foaming filaments (like PLA-Aero, ASA-Aero, LW-PLA, etc.) usually have issues with strings in normal printing. But, a special printing way called spiral vase mode can solve this by drawing the shape&#39;s outline all at once without stopping. This needs a special design trick to make sure every layer can be drawn in one go, with each layer sitting right on top of the last one. This lets Bambu Studio make a continuous printing line, avoiding any stops and moves.&nbsp;The design was tricky, but don’t worry about it. I did the hard work, and you can just print with the profiles I shared.&nbsp;NOTE: DO NOT rearrange the foaming parts, they need to be print one each plate with set spiral-vase mode.&nbsp;This flying wing has only 6 parts (3 big and 3 small), which have to be printed one by one in vase mode with foaming filaments. The other parts can be printed all together on one plate with regular filament.&nbsp;There are way fewer foaming parts than other RC planes you might see for sale. And printing this whole plane takes only about 10 hours, which is a lot less time than others that take 50+ hours.&nbsp;<h3>Lightweight and strong</h3> You might see some red parts in the pictures. Most of these aren&#39;t made from foaming material; they&#39;re actually for making the plane stronger. While the foaming parts cover a lot of the area and add to the weight, these regular material parts make it much tougher in important spots like where the motor is, the front edge of the wing, the nose, the bottom, and parts that let you swap things easily.&nbsp;These red parts help the wing handle normal landings and minor crashes without getting damaged.&nbsp;The weight ratio between foaming material and regular material is about 4:1.&nbsp;<h3>Modular and easy to assembly</h3>Even with its lightweight and strong design, the plane can still crash badly. When a crash happens, a typical 3D-printed plane has little chance to survive. But with this design, wings or broken parts can be easily swapped out thanks to the quick-swap connectors, a feature from the start.&nbsp;One of my goals was to make repairs possible right at the flying site. The solution? Make everything changeable.&nbsp;Yes, even wings of this small size have a quick-release system that allows for disassembly in no time, all without a single screw.I always have a set of wings and a body ready to replace any broken parts. During my flight controller tuning and plane optimization, I used up one plane on average each time. However, this wing design does a great job protecting the electronics; I&#39;ve never lost a servo or any electronic part.&nbsp;The assembly of each module is as simple and straightforward as possible. I really enjoy the building process, and I think you will too.Assembling a complete plane takes less than 30 minutes once you&#39;re familiar with it. And you shouldn&#39;t need to tune your new plane much, because 3D-printed RC planes always have accurate dimensions.<h3> </h3>&nbsp;/*-----------------------------------------*/ <h2>Assembly Guide</h2><figure class="media"><oembed url="https://www.bilibili.com/video/BV1km421j7s9/?share_source=copy_web&amp;vd_source=b546a6d9597e02729926794ebfed558e"></oembed></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_865c54c42a484.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-12_aeb7a2fda6674.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_b94d1ac3b9158.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_9f6387ab99d19.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_63c04a8bdd89a.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-12_5f2a8ad203ab9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_3fc3233debeac.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_91b7cad904b61.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_165d3cce09956.png"></figure>&nbsp;&nbsp;<h3>Video Assembly Guide</h3>video: To be uploaded&nbsp;&nbsp;/*-----------------------------------------*/<h2>Customized your planes</h2>I&#39;ve designed many options to enhance the capabilities of these small wings. Some are aimed at improving flying characteristics, while others boost functionality, like FPV (First-Person View) capabilities. Please see below for the different options available.&nbsp;<h4>Winglet options</h4>The Lite version, as the default option, is small and lighter, designed to meet the SUB250g regulations. This makes it perfect for those who want a compact and efficient flyer. On the other hand, the Large version offers more lift and better yaw stability, making it suitable for those who prefer a plane that can handle more varied flying conditions. More info please checkout this amazing explain video:<figure class="media"><oembed url="https://www.youtube.com/watch?v=x2Cn3vIb6gw"></oembed></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_88e69d6387c6e.png"></figure>&nbsp;<h4>FPV cap options</h4>The default is the flat top, you may mount your DIY camera on it. Besides, I&#39;ve also created 2 options to make your FPV setup easier:<ul><li>A 19-20mm top mount with a camera canopy. Print the camera mount with regular filament and glue it on top.</li><li>A mounting frame for<a target="_blank" href="https://betafpv.com/products/pavo20-brushless-whoop-frame?variant=40240553558150" rel="nofollow noopener"> a special O3 camera module</a> taken from BetaFPV Pavo 20 O3 module, can be purchased from their website. It&#39;s the most affordable and lightest O3 frame I&#39;ve found, and it even includes dampers for stabilization. This setup works great, and I highly recommend it.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_1bc35ff10bddd.png"></figure>&nbsp;<h4>Motor mount options</h4>The default motor mount fits 1304 to 150x motors, which are plenty for this small plane. You can try other motors, but remember, larger motors are heavier. You&#39;ll likely need to adjust the canopy to fit larger batteries and keep the center of gravity (COG) correct.By the way, the EDF didn&#39;t hit the advertised 200g thrust, only reaching 140g. However, it&#39;s still flyable and looks very cool.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_df23095ee762e.png"></figure><h4>Sled options</h4>The spring-loaded sled is for hard surfaces like rocky roads and off-road terrain. Hard surfaces can easily damage foaming parts, so a spring can effectively absorb the vibration and impact, thus protecting the body.&nbsp;For soft surfaces, like grass fields, a hard sled is sufficient.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_fdac8165e7127.png"></figure><h4>Nose options</h4>If you prefer not to mount the camera on top, you can use the camera nose instead of the standard one. It also accommodates a 20mm camera frame for an FPV camera. However, placing the camera at the very front of the wing is quite risky.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_dbbe92cb33b76.png"></figure>  /*-----------------------------------------*/<h2>More Vids</h2>BetaFPV Pavo 20 O3 modual on Breeze MX test video.<figure class="media"><oembed url="https://www.bilibili.com/video/BV1b1421o7c6/?share_source=copy_web&amp;vd_source=b546a6d9597e02729926794ebfed558e"></oembed></figure>  /*-----------------------------------------*/<h2>Tips</h2><ul><li>Rotate your flight controller by 90degree to save some space for battery.</li><li>Use fast servos, this is a agile wing.</li><li>Get the COG right,</li><li>Don&#39;t tilt the ailerons up like you might on other wings. This wingfoil already includes that effect, and the twist-wing design also contributes to pitch stabilization.</li></ul>&nbsp;

Breeze Mode X [SUB250 FPV Flying Wings] RC plane

Electronics Kits

rache6987

Symmetrical 4 color floral mandala coaster or wall art. You can easily change the colors used as well as what layer change it occurs. Very easy to print with AMS. If you are not using an AMS you will have to pause the print and do a manual swap of colors.

4 Color Floral Mandala Coaster

Decor

Scmdex 90

A recreation into a kanohi mask of DJ Cyber Mask and headphones from "Bomb Rush Cyberfunk"

Bionicle DJ Cyber Mask/Headphones (Bomb Rush Cyberfunk)

Bionicle

mireplica3d

<div><h1>Summary</h1><div><a href="https://youtu.be/TUPVs1gOd3s" rel="nofollow">https://youtu.be/TUPVs1gOd3s</a> This one dimensions: 120 mm long. 0.15 mm layer heigh. 55 mm/s. Horizontal expansion -0.03 mm.Little support behind the "mouth" is recommended.Sure you can print even smaller ;)</div></div>

Articulated Tardigrade

Funny Creatures

MM_3DP

Benvenuti alla presentazione del nostro nuovo sottobicchiere a forma di margherita! Realizzalo con materiali di alta qualità e avrà un design accattivante, questo sottobicchiere è perfetto per decorare la vostra tavola con un tocco di freschezza primaverile. La forma a margherita rende questo sottobicchiere unico e originale, perfetto per un picnic all&#39;aperto o una cena elegante. Non vediamo l&#39;ora di farvi scoprire tutti i dettagli di questo fantastico prodotto!&nbsp;Welcome to the unveiling of our new daisy-shaped coaster! Made it with high-quality materials and eye-catching design, this coaster is perfect for adding a touch of spring freshness to your table. The daisy shape makes this coaster unique and original, perfect for an outdoor picnic or an elegant dinner. We can&#39;t wait to show you all the details of this fantastic product!