Show Studio

YelTrik Designs - Click FOLLOW

“Feeder Saver” - The AMS is an engineering marvel. However, the infamous feeder “button”, AKA Feed Funnel, has caused much concern when it comes to longevity. Simply put, it will wear on the edges of the feeder filament entry forcing a potentioally expensive replacement of the AMS First Stage Feeder. My AMS “Feeder Saver” will not only protect you from this potentially expensive reality, it will also properly align the filament to reduce the likelihood of feed and pullback errors. All this for about a dollar in filament for a set of four!&nbsp;NOTE:<ol><li>Desiccant Box Version: If you have desiccant boxes, I recommend the print profiles with the following in the title “NO Sides - Desiccant Box Compatible”</li><li>Hydra Mod Version: If you are using the Hydra Mod for your AMS, please use the Hydra Mod Print Profile</li></ol>&nbsp;Features and Benefits<ul><li>Protects the feeder “button” from premature wear and replacement</li><li>Snaps on securely using a wrap-around design - Will NOT come off during a print like some other feeder solutions</li><li>Precision alignment of the filament from spool to feeder reduces friction and helps prevent the likelihood of feed and pullback errors</li><li>Uses inexpensive PTFE used for protecting the “button” and the “Feeder Saver”</li><li>Tested with full-size 1kg spools and 1/4kg spools full and near finished</li><li>Simple install - SEE INSTALL VIDEO BELOW - no need to remove the AMS First Stage Feeder to install or remove</li><li>Satisfying “snap-on” sound when installing giving you confidence it will not come off during a print</li></ul>See Installation Instructions and Printing Notes Below&nbsp;Comments From Users“I tried many of these designs and discarded them all, this is the best I have come across and printed 16 of them for all 4 of my AMS's. Well done on this design its well thought out.”&nbsp;“Great design!”&nbsp;“fits perfectly, thank you very much”&nbsp;&nbsp;<figure class="image image_resized" style="width:46.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_e66235c4c7342.jpg"></figure>Secure wrap-around snap-in-place design<figure class="image image_resized" style="width:46.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_0253cf1682a508.jpg"></figure>Alignment guide reduces the likelihood of feed and pullback errors<figure class="image image_resized" style="width:45.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_1b844a2d28b838.png"></figure>PTFE tube prevents premature wear of the filament feeder<figure class="image image_resized" style="width:45.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_72e858d1e3e3b8.jpg"></figure>PTFE tube is inexpensive and easily replaced when needed<figure class="image image_resized" style="width:44.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_e0c9e5309e27c8.jpg"></figure>Designed using Solidworks for a precision fit and finish<figure class="image image_resized" style="width:44.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_152ea4d06dcb6.jpg"></figure>PETG and PLa Print Profiles available and tested (PLA above photo) INSTALLATION:<ol><li>Installation is simple and does NOT require you to remove the AMS First Stage Feeder (feeder).</li><li>Simply slide the “Feeder Saver” over the feeder making sure the front of the “Feeder Saver” is set in place and flush with the front edge.</li><li>The sides of the “Feeder Saver” should be over the edges of the feeder.</li><li>Once the front of the “Feeder Saver” is properly aligned and in place, push on the back portion of the “Feeder Saver” until you hear the very</li><li>satisfying “Snap”.</li><li>Message me if you need an installation video.</li></ol>&nbsp;<figure class="image image_resized" style="width:71.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/604059/2023-12-05_9e72b3983e8678.png"></figure>&nbsp;

Secure Fit AMS Feed Saver & Smooth Fix - Not A Button

Bambu AMS

RDesigns

This is the MINI version of the Rugged Storage Box!&nbsp;For bigger use cases: <a target="_blank" href="https://makerworld.com/en/models/400045#profileId-310146" rel="nofollow noopener">https://makerworld.com/en/models/400045#profileId-310146</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_7fefdbd415e81.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_2d5d5f8116494.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_71e81232d588.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_7e927e2937eb4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_86f965db47a088.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_af8e815e2e3f58.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_f2821394cdb6.png"></figure><figure class="image image_resized" style="width:98.52%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_26740c100c784.gif"></figure><figure class="image image_resized" style="width:98.15%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_ac111f07486578.gif"></figure><figure class="image image_resized" style="width:97.57%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415378/design/2024-04-05_ab9c9fac490f.gif"></figure>The box is assembeld with pieces of filament, so screws arn&#39;t needed anymore!&nbsp;If the filament falls out of the hinges, glue the ends a little with super glue.&nbsp;For the sealing, TPU can be used.&nbsp;Attention:Pay attention to the comments in the parametric design in Fusion 360!&nbsp;&nbsp;Release Notes:05.04.2024<ul><li>Version 1<ul><li>Version 1 release of the Rugged Storage Box MINI</li><li>Screws are replaced trough small pieces of Filament that perfectly fit in!</li><li>The Design in Fusion 360 is Parametric, most of the dimension can be changed.</li><li>The Latch design stands out with it&#39;s wheels, which lock into place perfectly!</li></ul></li></ul>

Rugged Storage Box MINI (Parametric, Screwless)

Parametric

bambaxp

There are three different sizes based on the diameter of the rod handle, to be printed preferably in PETG

Safe fishing hook

Fish

BaGooN

This is a stylish hex pattern design handle that is compatible with M3, M4 and M5 bolts, and comes in 6 designs for each.The M3 version of the handle has the perfect width for 1515 extrusion, while the M4 version is ideal for 2020 extrusion, M5 version for 3030.Of course, you can use it for various things other than an extrusion frame too!&nbsp;Print Settings:<ul><li>Material: PLA</li><li>Layer height: 0.2mm</li><li>Supports: no</li><li>For a clean print, Please slice design A only as shown in the image below.</li></ul><figure class="image image_resized image-style-align-left" style="width:357px;"><img src="https://media.printables.com/media/prints/423500/rich_content/4e6cc2db-fc59-4e08-9aca-3b8ebb97ed23/thumbs/cover/800x255/jpg/ab.webp"></figure>&nbsp;&nbsp;&nbsp;&nbsp;

Hex Pattern Handle Collection

Aluminum profiles

bicycle

faithfulvein

<h3>Features:</h3><ul><li>Custom Fit: Precisely crafted to accommodate the QuinLED-Dig-Uno WLED controller.</li><li>Sloped PCB Guides: Facilitates effortless positioning of the PCB, simplifying the mounting process.</li><li>Secure Hold: The PCB is anchored firmly with M2x4 screws, maintaining stability throughout use, regardless of orientation.</li><li>Snap-Fit Design: The top and bottom components snap together, allowing tool-free accessibility.</li><li>Cable Management: Holes at both ends facilitate neat organization, and screw-down cable clamps assure cable security.</li><li>Vented Top: Designed with a vented structure, ensuring the controller remains at optimal temperatures.</li><li>Shadow Line Integration: A shadow line helps hide discrepancies between parts, making for a cleaner finish. Additionally, they act as a visual guide, simplifying alignment during assembly.</li><li>External WiFi Support: There are two version of the enclosure. One standard model and another that includes a hole for version of the Dig-Uno with an external WiFi antenna.</li></ul><h3>Additional Parts</h3><ul><li>4 x M2x4 button-head screws to mount the PCB</li><li>4 x M2x10 button-head screws for the cable clamps<ul><li>You might be able to get away with M2x8 screws depending on the diameter of the cables you use.</li></ul></li></ul><h3>Printing</h3>The enclosure is specifically designed for these settings but will probably work fine either way.<ul><li>Perimeters (Wall Loops): 3</li><li>Layer Height: 0.2mm</li></ul>

QuinLED Dig-Uno Snap Fit Enclosure

Hinge

Gr3dstampaidee

Simple print nintendo switch game holderAccessories to add<ul><li>mario <a target="_blank" href="https://makerworld.com/en/models/156000#profileId-170805" rel="nofollow noopener">MARIO-BROS by Gr3dstampaidee - MakerWorld</a></li><li>fungo <a target="_blank" href="https://makerworld.com/en/models/156010#profileId-170814" rel="nofollow noopener">MUSHROOM-MARIO-BROS by Gr3dstampaidee - MakerWorld</a></li><li>stella <a target="_blank" href="https://makerworld.com/en/models/156005#profileId-170809" rel="nofollow noopener">STAR-MARIO-BROS by Gr3dstampaidee - MakerWorld</a></li><li>banzai <a target="_blank" href="https://makerworld.com/en/models/156012#profileId-170816" rel="nofollow noopener">BANZAI-ROCKET-MARIO-BROS by Gr3dstampaidee - MakerWorld</a></li><li>plant <a target="_blank" href="https://makerworld.com/en/models/155979#profileId-170796" rel="nofollow noopener">PIRANHA-PLANT-MARIO-BROS by Gr3dstampaidee - MakerWorld</a></li></ul>

NINTENDO SWITCH GAME HOLDER ORGANIZER

Switch

衫弟

中国古代八角亭

Builds

BringOutYourBugs

This nano terrarium is like having you own magical garden, but shrunken down to fit in the palm of your hand - perfect for those with a penchant for the petite and an eye for the wonders of nature! Put it on your shelf, on your office desk, or by your bed. The world is your mossy oyster.&nbsp;There are currently two versions, the first has a 5mm deep tray in the bottom, moss can be placed directly onto this surface and kept moist with a pipette, the second deep tray version sacrafices a small amout of window area to allow for a 12mm deep susbstrate or gravel layer to be added.&nbsp;This is the largest version I could fit on a single build plate, it's a push fit design so you shouldn't need any glue. I've done my best to assure it will go together without adhesive assuming your printer is relatively well calibrated, however, if you find the fit isn't quite right on your machine just use a very small amount of XY hole adjustment in the slicer, try 0.05 and no more to start with. It should snap together with a firm push and feel solid once engaged.&nbsp;The light fixture is designed to take any 8mm wide LED tape and uses snap fit connectors for the power. You will need one piece of transparent material for the front window, I used 1mm glass cut to size, but you could also use 1mm perspex/acrylic sheet, thin acetate sheet or clear PET bottle in a pinch. If you would really like the 1mm glass and don't have any way to cut it, I can supply perfectly cut front piece if you cover the shipping. I will look at offering all the bits you need for the full build together as an affordable kit in the near future so you don't have to buy more than you need, but here are the items that it has been designed around if you are happy to order a slightly larger quantity than required.&nbsp;Light Tape - <a target="_blank" href="https://www.amazon.co.uk/dp/B07KLTYMHM?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">YUNBO 12V LED Strip Lights Natural White 4000K 5M 600LED SMD2835 8MM Wide Cuttable Flexible LED Tape Lights IP20 Indoor Use LED Lighting : Amazon.co.uk: Lighting</a>&nbsp;Snap Fit Tape Connectors <a target="_blank" href="https://www.amazon.co.uk/dp/B07SMD71HQ?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">RUNCCI-YUN 8mm 2pin 3528 2835 LED Connector,5.5mm x 2.1mm LED DC Power Supply Connector×6，LED Strip Connectors 2 pin×12 : Amazon.co.uk: Lighting</a>&nbsp;All you need beyond these items is a 12v power supply, which hopefully you have laying around somewhere.&nbsp;For assembly, the bottom panel (with drip tray), rear wall, top (with aperture for light), and right hand side piece (the one with the slot for the click close mechanism) are assembled first, in that order. Once these are all nicely together the hinge pins on the door are located in the small hinge dimples on the left hand side of top and bottom plates, finally the left hand wall is added to hold everything in place. Don't be worried if you need to give it quite a squeeze, it should all be very solid with the 5mm walls. Once it's assembled you can then slide the window into place.&nbsp;&nbsp;<a target="_blank" href="https://giphy.com/gifs/oGKS1QOYY9xPx8CCUf" rel="nofollow noopener">via GIPHY</a>&nbsp;&nbsp;I will make a larger version soon, but I thought it would be fun to have a pretty much complete terrarium on a single plate. I'd love to see what you do with it. If you have any issues at all with the build get in touch and I'll do my best to help.&nbsp;Hope you enjoy it and may your world be full of mossy wonderment forever more!!!&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Nano Mossarium/Terrarium

Mossarium

BrewBoy

<h2>THE CRANKHAMMER - Multi-Shot Launcher</h2>AKA: Wheel Gun V1.5A step up from the Wheel Gun V1 with a few extra features and a visual overhaul.&nbsp;VIDEO: <a target="_blank" href="https://www.reddit.com/r/3Dprinting/s/ygPbrqrSmU" rel="nofollow noopener">https://www.reddit.com/r/3Dprinting/s/ygPbrqrSmU</a><h3>New Features: (Compared to the V1)</h3><ul><li>Side chargers for quicker & easier priming.</li><li>Magazine crank to help quickly cycle to the next round.</li><li>Reload/Ejection port cover.</li><li>Complete overhaul of the frame for a more modern look and a much more comfortable grip.</li><li>Slightly more optimized parts for some what easier printing.</li><li>More Powerful.</li></ul><h3>Parts List:</h3>Nuts & Bolts:5 x M3*6 bolt1 x M3*8 bolt2 x M3*12 bolt3 x M3*20 bolt4 x M3*25 bolt3 x M3 Nut&nbsp;Compression Springs:1 x OD: 10mm, WD: 0.8mm, Length: 55mm<a target="_blank" href="https://www.aliexpress.com/item/1005002523758634.html?aff_platform=true&aff_short_key=UneMJZVf&isdl=y&src=bing&pdp_npi=3%40dis%21CAD%211.49%211.49%21%21%211.88%21%21%40%2112000021005031078%21ppc%21%21&albch=shopping&acnt=135095331&isdl=y&albcp=412811419&albag=1311717734383599&slnk=&trgt=pla-4585581970548950&plac=&crea=81982433154568&netw=o&device=c&mtctp=e&utm_source=Bing&utm_medium=shopping&utm_campaign=PA_Bing_CA_PC_customlabel1&utm_content=customlable1%3D7&utm_term=aliexpress%20305mm%20spring&msclkid=91572ea3b6a41a4e20b94b3fbac2f23b" rel="nofollow noopener">305mm Compression Spring Wire Dia 0.3 0.4 0.5 0.6 0.7 0.8 1 - 5mm Outer Dia 3 3.5 4 4.5 5 5.5 6 7 8 10 12 - 60mm Length 305 mm (aliexpress.com)</a> - I use these ones and cut them down to length.3 x Pen Springs<ul><li>1 - Hammer Latch</li><li>1 - Cut in half for magazine latch</li><li>1 - Cut to 6 mm length for crank indexer</li></ul>Misc:1 x Elastic Band<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669627/2024-03-09_c13ff6276b392.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669627/2024-03-09_57261d66f794d.jpg"></figure>

The Crankhammer (Wheel Gun V1.5)

PoussinJaune

Wire spool holder Bambu Lab AMS style hold 4 spool of 20 x 55mm with the M3F or spool of a ratio of 2-3x if you size it uniformly (Ratio of 2-3x mean the height can be 3 time bigger than the length and minimum 2 time)I don't have translucid filament yet but if you have do the front and the top with it.&nbsp;THE STL IS OVERSIZE BEACAUSE I REPREDUCE THE AMS AND THEN MODIFY IT TO HOLD SPOOL FOR MAXIMUM REALISIM :). ITS EAZY TO RESIZE IT ON ANY SLICER.

WIRE SPOOL HOLDER BAMBU LAB

Solder

wuguigui

Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;Updated 20240119Someone mentioned the cap might be too tight or not stable when closed. I modified the shape of the part&#34;Dragonpen2024-Body-1&#34; several times(You can see the picture below), to get a better result. Now you can download the “Dragonpen2024-Body-1-New” part to have a try.Recommended Filaments: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fpla%2Dtough&amp;afftrack=" rel="nofollow noopener">Bambulabs PLA Tough </a>or <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fcollections%2Fpla%2D1%2Fproducts%2Fpla%2Dcf&amp;afftrack=" rel="nofollow noopener">BambuLabs PLA-CF</a> (It might be a little loose for the refill and too tight for the cap, please use the “Dragonpen2024-Body-1-PLACF”), the PLA-CF can get a very smooth surface(the blue one in the picture below), but might be a little tight when closing the cap, you can close the cap and open it over and over to make it open easily. You can also try other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>.有些朋友提到笔帽拔出时有点紧，笔帽盖紧后与笔身有活动间隙。因此我修改了握笔部件的造型，大家可以尝试新的模型文件“Dragonpen2024-Body-1-New” ；另外非常推荐使用<a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fcollections%2Fpla%2D1%2Fproducts%2Fpla%2Dcf&amp;afftrack=" rel="nofollow noopener">BambuLabs PLA-CF</a>材料打印，打印时握笔部件推荐使用“Dragonpen2024-Body-1-PLACF”模型。这种材料可以另这支笔的表面很光滑，并呈现出非常好的质感。不过使用PLA-CF材料时笔帽插拔时可能还是会略紧，可以多插拔几次使其手感变得较舒适。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000129985/design/2024-01-19_7d16d153d7c65.jpg"></figure>_________________________________________________________________________________________________________________________________________This is a dragon pen I designed for the coming Chinese New Year.It can use Zebra JF or Pilot LP3RF refill and may be capable of other brands of refill, you can add comments if it&#39;s possible.这是一只可3D打印的螭首笔，创意源自紫禁城里的螭首排水管，寓意书写出水流利。适配斑马Zebra的JF笔芯以及百乐Pilot的LP3RF笔芯，或许还能适配其他笔芯，如果可行请在评论里增加描述。详细介绍见B站视频：<a target="_blank" href="https://www.bilibili.com/video/BV1oQ4y1L7Wb/?spm_id_from=333.999.0.0&amp;vd_source=ddcaa334bf40e5b233718d3c3f743c02" rel="nofollow noopener">https://www.bilibili.com/video/BV1oQ4y1L7Wb/?spm_id_from=333.999.0.0&amp;vd_source=ddcaa334bf40e5b233718d3c3f743c02</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000129985/design/2024-01-14_32912a7a11a96.jpg"></figure>Click &#34;Like&#34; if you like it, feel free to boost me or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&amp;locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a>, thank you! Have fun!If you want to sell the printed model, you need a Commercial license at: <a target="_blank" href="https://www.patreon.com/wuguigui/membership" rel="nofollow noopener">https://www.patreon.com/wuguigui/membership</a>&nbsp;Watch the video for more information:<figure class="media"></figure>

3D Printable Dragon Pen

Firenoob

A remix made for the "Game of Thrones - Drogon fire dragon lamp" made by Bozzman! &nbsp;This remix improves two aspects of the original design:<ol><li>I have made the fire more realistic looking. I personally printed the fire with two wall perimeters (and no bottom/top layers) as I found the originally recommended spiral vase mode would cause the fire to be very fragile and break easily.</li><li>I have made a base that the fire snaps onto. This base was designed to wrap an LED strip around the pole. However, I have also added the flat plate part of the base so others can modify it to fit other bulbs/designs. Depending on your printer, you may need to adjust the scaling of the base by ~1% either way to allow the fire to properly snap onto it. There is also a small notch in the side of the base to allow the light's cable to exit. If you need a bigger notch you can just quickly cut away some volume in tinkercad. </li></ol>&nbsp;The rest of the build I recommend to follow the original instructions… I printed the dragon in separate pieces and glued them together. Printed using hatchbox white and black pla. &nbsp;

Game of Thrones - Dragon Fire Lamp - Improved Base

Lamp

Thor3D

Hi…&nbsp;Here is my Skadis remix with the bambu lab logo in two colors.&nbsp;Here the link if you want no logo: <a target="_blank" href="https://makerworld.com/en/models/109811#profileId-117286" rel="nofollow noopener">https://makerworld.com/en/models/109811#profileId-117286</a>&nbsp;If you like it please leave a like and maybe a make..&nbsp;Thanks

IKEA Skadis 23x23cm Quad Block with Bambu Lab Logo 2 Colors

Skadis

Marco C

Mit CAD selbst designter Halter für 2 Siebträger passend zu Rocket Espresso Maschinen. In die vier runden vertiefungen, an der Unterseite, habe ich rutschfeste Gummifüße eingeklebt.

Halter für Rocket Siebträger

Coffee

planetace

This is a little addition for the <a href="https://www.printables.com/de/model/345083-rugged-multipart-pinecilts100ts80-case-v2" rel="nofollow">great rugged box</a> from <a href="https://www.printables.com/de/@PjotrStrog" rel="nofollow">@Pjotr</a> it holds the <a href="https://cnckitchen.store/de/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow">TS100/101 Soldering Adapter + Tips Set</a> from <a href="https://www.printables.com/de/@CNCKitchen" rel="nofollow">@CNC Kitchen</a> for the TS100/TS101/Pinecil the dimensions of that “insert base” fitted to my print, probably you have to glue it down or scale a bit, depending to your printer/accuracyfor the insert-center you need some M5 Wormscrews, i used 20mm long screwsthe thread in the center holds the worm screws, the tips can be easy screwed on/offto get the parts out you can remove the complete insert and unscrew the one you need

Insert for CNC Kitchens TS100/Pinecil Adapter

TS101/PTS200

Brandon Raineri

<h2>Updates</h2><h3>Version 2.1 (09/27/23)</h3><ul><li>Added lead-ins to the filament entry cavity</li><li>Changed PTFE stop ledge angle at filament exit end</li><li>Added note about countersinking PTFE that enters the printer</li><li>Updated printing profiles</li><li>Added additional sources for the release rings so they can be purchased outside of the US</li></ul><h3>Version 2</h3><ul><li>Added through hole for an M3x20mm mounting screw. Printed with a 0.4mm nozzle at 0.10mm layer height</li><li>Added printable locking clip STL file to eliminate backlash in fitting/PTFE tube when pulled on</li><li>Print with single inlet side on the build plate. Add a 10mm brim to stabilize the print</li></ul><h3>Version 1</h3><h2>Background</h2>This allows you to run material from the AMS or external spool without having to disconnect the PTFE tubing.This uses push to connect fittings as you would see in a typical PTFE connector.&nbsp;<h3>Release Rings: QTY: 3 of PC4-UM2</h3>I do NOT recommend the printed release rings as they are too fragile and do not securely hold the PTFE tube into place.&nbsp;Amazon (<a target="_blank" href="https://www.amazon.com/dp/B0B282NZVW?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B282NZVW?ref=ppx_yo2ov_dt_b_product_details&th=1</a> )AliExpress (<a target="_blank" href="https://www.aliexpress.us/item/3256804490680277.html?gatewayAdapt=glo2usa4itemAdapt" rel="nofollow noopener">https://www.aliexpress.us/item/3256804490680277.html?gatewayAdapt=glo2usa4itemAdapt</a>)McMaster (<a target="_blank" href="https://www.mcmaster.com/5472K101/" rel="nofollow noopener">https://www.mcmaster.com/5472K101/</a>)<h2>Installation</h2>Push the retaining ring into each end. After you insert the PTFE tubing until it bottoms out, pull back so the release ring has a gap between it and the printed surface. Insert the locking clip into this gap and then push the PTFE back in so it seats. This removes any backlash so the end of the PTFE tube remains firmly in contact with the bottom of the bore.&nbsp;While not always required, I found it helps to countersink the PTFE tube entering the printer as it provides a lead-in to prevent snags.&nbsp;You also need to ensure the printer buffer operates as intended. The PTFE tube exiting the buffer needs to clear the AMS clip going into the back of the printer. This prevents any unwanted resistance to the buffer and let‘s it operate as intended. If not, you can see what looks to be like a partial clog or even failure to retract filament.

Over-Engineered Y-Splitter

Y-Splitter

Ludo Timp

Z-axis cap for P1P, X1 and X1C  |  Loose fit!&nbsp;For all the people who want to give feedback on the fact that this cap is too loose of a fit:The reason of the loose fit that rotates easily is that not in any case you want a z-axis dust cover to grip, snap or sit to tight at the top op the z-axis screw rod. Just the slightest resistance of a cap against the z-axis screw rod can result in layer defects. So I advice you to go for the safe option, in stead of the tight option. And if you don't want any risk whatsoever, don't use a cap at all. Not even mine that has a loose fit.I use them now for over a year and never had any z-axis defects, pop off's or other issues.&nbsp;Features:<ul><li>Shields the metal z-axis end-bearing from dust and filament debris.</li><li>Material: Bambu Lab Black ABS.</li><li>Chamfered bottom and top.</li><li>Diameter: 19mm.</li><li>Height: 2mm.</li><li>Includes 1,5mm inside indent for z-axis metal protrusion.</li><li>To be placed on top of the z-axis.</li><li>Sightly smaller then the z-axis hole so the cap can rotate freely if needed.</li><li>Printed on Bambu Lab PEI textured plate to match the plastic z-axis mount matte finish a bit.</li><li>Easy removal: just press your finger a few seconds on the cap and lift it off.</li></ul>Disclaimer: This design is free to download including the accompanied files. By downloading this design, you agree to the following:<ul><li>as with all designs that you didn’t make and test yourself, mine may work or won’t for you,</li><li>I can’t give any guarantees for the print you make, the way you do it and which tools u use,</li><li>no rights can be derived and I can’t be held liable.</li></ul>If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.  If you like what I made and want to tip me for it, please do so at your discretion at <a target="_blank" href="https://ko-fi.com/ludotimp" rel="nofollow noopener">Ko-Fi</a>. Have fun and enjoy being creative!

Z-axis cap P1P, X1, X1C  |  Loose fit!

Printer

HMJ花喵菌

这个P1S增高散热配件的设计初衷就像它的标题一样简单明了，它提供了最基础的增高和顶部散热的功能，且只增高4cm(去掉机器本体的下凹槽位，实际增高高度约为38mm），在设计上极度简化，所以它的打印难度并不高，也相对节省打印材料，这里我推荐PETG打印，我并未测试其他的打印耗材，不能保证其他品类的耗材打印效果，如果使用我提供的3mf配置文件进行打印，那么增高件的主体部分仅需357g的耗材即可。主体部分的组装用的是榫卯插销结构，不需要任何螺丝固定就能组装完成。&nbsp;<figure class="image image_resized" style="width:78.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-20_e4e0069df059a.png"></figure><figure class="image image_resized" style="width:49.52%;"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-16_15a12be63b0dd.png" alt="主体部分可以一次性打印完成"><figcaption>主体部分可以一次性打印完成</figcaption></figure> <figure class="image image_resized" style="width:47.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-16_c3d6363b9a441.jpg"><figcaption>已在两台机器上验证可行性</figcaption></figure>&nbsp;&nbsp;&nbsp;它所需额外购买的安装配件如下：1，6mm直径3mm厚度的圆形磁铁38个【至少需要38个，但最好多买一点】2，502胶水【只要能黏住磁铁可以选择其他种类胶水，我本人使用的是饰品胶】3，15mm宽，1mm厚度的3m eva单面泡沫胶带【这个是可选项，不安装这个泡沫胶也不影响增高散热的使用】&nbsp;<figure class="image image_resized" style="width:50.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-23_abfa06affee198.png"><figcaption>3m Eva胶带的黏贴位置如图所示，除了图片展示的位置以外，增高架底部也可以粘贴胶带。胶带的作用是给玻璃盖板一个缓冲层，这样可以避免玻璃盖板和增高散热支架的直接接触。</figcaption></figure>&nbsp;磁铁辅助安装工具的使用方法<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-30_ed552a5d90ad9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-30_f124d1be0334.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-30_1793b45e69d28.png"></figure>&nbsp;&nbsp;Q&A 为什么要安装增高散热1，因为在不安装增高散热的情况下，打印头顶部的料管有很大概率会和顶部玻璃摩擦2，可以在不打开打印机舱门和掀起顶部玻璃的情况下提供被动散热的空间，你仅需要把磁吸盖板移除即可，优雅且高效。&nbsp;&nbsp;提供STEP工程图文件这个增高散热在设计上不可能令所有人都满意，这也是我制作这个配件的初衷，它满足了我所有的需求，且避免了我不满意的部分，上传这个作品也仅仅是给大家多提供了一个选择，并且我希望任何人都能基于此项目制作出自己满意的作品，且少走一些弯路，所以我提供了step工程文件提供参考，至少可以参考它的参数部分。&nbsp;&nbsp;如果你缺一个竹屎（废料）筒的话，你可以试着打印由我设计的模型。可以点击下方图片跳转至模型详情页面：<figure class="image image_resized" style="width:40.96%;"><a href="https://makerworld.com/zh/models/67388#profileId-71326" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-24_6350e0fe33fb9.webp"></a><figcaption>竹屎筒链接</figcaption></figure>&nbsp;------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------如果你的磁铁有多余的话，那么你可以考虑打印一个我设计的解压小玩具，跳转页面点击下图：<figure class="image image_resized" style="width:40.04%;"><a href="https://makerworld.com/zh/models/71625#profileId-75829" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/509268/2023-11-23_c2d52b045c0f8.png"></a><figcaption>拇指开关链接</figcaption></figure>

P1S  X1C Riser 增高散热

Bambu Riser

Kagman

IF POSSIBLE, PLEASE BOOST IF YOU FOUND THIS MODEL HELPFUL. TY :)&nbsp;Glue the QR codes onto this model to easily attach or xfer to new plates. No more having to glue or tape QR codes directly onto your plate.&nbsp;I&#39;ve attached a PDF sheet with QR codes to print. (credit to user <a target="_blank" href="https://www.printables.com/@elumspe" rel="nofollow noopener">@elumspe</a> for making this)&nbsp;Cut out the QR code you need along the dotted line, then glue onto the square slots of this model.&nbsp;Make sure the attachment is pushed tight against the side and bottom of your plate to ensure accurate placement.&nbsp;Important: Included in the project file is a variety of internally spaced model variations. What you should print depends on your plate thickness. If you have a caliper, measure the thickness of your plate, then choose the gap size closest to that. A tight fit ensures this attachment will stay gripped to your plate.&nbsp;Print in PETG or ABS. Do not use PLA, it will warp from the heat.

Bambu Labs QR Code Plate Attachment

Bambu Plate

Poli27

Bambu refillable spool, with replaceable label!

Bambu Reusable Spool with replaceable label

Bambu Spool

Aesth3tix

Lots of great storage solutions for my Bambu Lab spare parts out there but I wanted something with less restrictive internals. This case is completely open on the inside with no dividers. Works great for packs of PTFE tubing, belts, cables, etc. Pretty much anything that does not have to be bound to a certain space. &nbsp;&nbsp;Construction is solid. (4x) 3mm x 35mm socket head screws and nuts are all you need for the snap lock latch and the rear hinges.&nbsp;&nbsp;I ran through countless different versions of the snap lock hinge. I wanted it to be as secure as possible while still maintaining functionality. You'll notice, it is a tight fit but with a firm press, it will snap lock right in to place and will not accidently unlatch. I absolutely love the way it turned out and the “snap” of the locking feature is so satisfying. &nbsp;<ul><li>The print profile is ready to go with correct settings for a strong latch. However, if you decide to use your own settings, please use a minimum of 30% infill, slower speeds, and PLA+ or better for the latch to assure you have a long lasting, functional, and strong latch. </li></ul>&nbsp;&nbsp;Below is a link for the 3mm socket heads but there are plenty of other listings available. This assortment has them partially threaded which is perfect for the project. <a target="_blank" href="https://www.amazon.com/Kadrick-Assortment-M3x4MM-35MM-Machine-Anti-Rust/dp/B0BRWCFD6Q/ref=sr_1_1?crid=5CZB34HGAEFO&keywords=kadrick%2Bmm%2B16%2C%2C-35mm&qid=1699821184&sprefix=kadrick%2Bmm%2B16%2C%2C-35mm%2Caps%2C160&sr=8-1&th=1" rel="nofollow noopener">Kadrick 1250 Pcs M3 Screws and Nuts Assortment M3x4MM-35MM, Hex Socket Head Cap Metric M3 Machine Bolts Kit, 12.9 Grade Alloy Steel,Anti-Rust Up Graded,Black Zinc Plated,Free Allen Head Wrench: Amazon.com: Industrial & Scientific</a>&nbsp;<figure class="image"><img src="https://m.media-amazon.com/images/I/81WRDG6oloL._SL1500_.jpg"></figure>&nbsp;&nbsp;Check out some of my other storage solutions!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/38349#profileId-37146" rel="nofollow noopener">Swatch Box SOLO by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/184699/2023-11-05_b5c31cdc17601.png">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/57752#profileId-59478" rel="nofollow noopener">Swatch Box A1 by Aesth3tix - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/184699/2023-11-05_83a140c4b0bae.png">

Bambu Tough Case

Storage

remi.rafael

<div><h1>Summary</h1><div>This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types.Edit: Bigger sizes are now available here: <a href="https://www.printables.com/model/455708-handles-for-m7-to-m12-bolts-and-screws" rel="nofollow">https://www.printables.com/model/455708-handles-for-m7-to-m12-bolts-and-screws</a> or here: <a href="/thing:5975322" rel="nofollow">https://www.thingiverse.com/thing:5975322</a></div></div>

Handles for M3 to M6 bolts and screws

Tools

Kit Crafters

Build your own Formula 1 2023 racecar with this incredibly easy to print model!&nbsp;Modelled after the 2023 hybrid era cars, this model kit card has spinnable wheels and a flexible front wing like the real racecars.&nbsp;Easy to assemble and is put together with pressure and friction fits.&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/22058#profileId-20000" rel="nofollow noopener">Mario Kart Model Kit</a> as well!

F1 2023 Model Kit Card

Toys

technerd

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon pellets etc. Happy printing! AirManager V2 is a recirculating air scrubber for 3d printing enclosures. It generates no draft because the air is recirculated inside the enclosure. It removes VOCs and fumes inside the printer enclosure. It is mainly used for printing ABS, ASA, Nylon and other filaments with high VOC content. If you are still unsure whether you need an air scrubber, there are many posts and discussions on the Internet that can help you become fully informed. I use the Zortrax filter set but by now there are way cheaper alternatives out there. Btw. the sizes of the Zortrax filters are: Hepa 120x120x16mm Activated Carbon 120x120x10.5mmI’ve tried to integrate snap-fit connections in the filter housing. They kind of work but are not the best (this is my first try on snap-joints, feel free to do a remix). You need to use super glue on the snap-joints if you want the filter housing cover to be firm. You can use this device also as a solder fume extractor.Bill of materials:4x Neodym magnets N52 ø10mm x 3mm 12x 2,9mm x 9,5mm ISO 14586 (DIN 7982) screws 2x M4 x 35mm screws 2x M4 washers 2x M4 nyloc nuts 1x Titan Blower TFD-B9733M12C 1x HEPA & Carbon Filter set from Zortrax (3sets) 1x Self adhesive foam rubber (thickness 2mm) 1x PWM low voltage motor speed controller with switch 12V/2A 1x DC power jack socket with ø8mm threadThe 4x Neodym magnets are integrated into the “blower housing magnetic cover”. Just add a pause or filament change in the slicer at “layer 20” or “height 4mm”.Fix the funnel with two stripes of self adhesive foarm rubber to the titan blower.The fan blower has plenty of suction and does not need to be on full speed.If you don’t have the metal server cabinet as enclosure use the “blower_housing_screw_cover” to fix the AirManagerV2 to your enclosure.Here is a short test video of the AirManagerV2 with an incense candle:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=GJdmQB-2da8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/GJdmQB-2da8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Here is a link to my AirManagerV2 blogpost with all the pictures: <a target="_blank" href="https://www.schweinert.com/airmanagerv2-for-3d-printing-enclosure/" rel="nofollow noopener">https://www.schweinert.com/airmanagerv2-for-3d-printing-enclosure/</a> Btw. if you want to build yourself an enclosure take a look at my blog post here: <a target="_blank" href="http://www.schweinert.com/perfect-3d-printer-enclosure-for-prusa-i3-mk3/" rel="nofollow noopener">http://www.schweinert.com/perfect-3d-printer-enclosure-for-prusa-i3-mk3/</a><h3>Print instructions</h3>No supports needed but I used a brim on all parts to avoid any possible warping. I used Prusa PETG for all parts but I think you can use PLA too.