Shinokwak

Paidros

EN: The toothpaste squeezer you see in the photo is printed in SUNLU PETG.You will need to print three components: a body, a rod, and a gear wheel.To assemble it, insert the rod into the body and screw the gear wheel onto the rod, as shown in the GIF.Insert your toothpaste through the slot in the body and rod, and now you can turn the rod to squeeze the toothpaste out.<ul><li>Thanks to the gear wheel, the rod won&#39;t be able to turn in the wrong direction.</li><li>You&#39;ll also find the rectangular shape of the body useful for keeping your toothpaste standing upright.</li></ul>When you&#39;ve used up all the toothpaste, turn the gear wheel to release the rod and extract the remaining toothpaste.As you may have guessed, you can use it not only for bathroom products but for anything like creams or sauces.When leaving your review, attach a photo!&nbsp;IT: Lo spremi dentifricio che vedi in foto è stampato in PETG.Dovrai stampare tre componenti: un corpo, un&#39;asta e una ruota dentata.Per montarlo inserisci l’asta nel corpo e avvita la ruota dentata all’asta, come nella GIF.Inserisci il tuo dentifricio attraverso la fessura del corpo e dell’asta, ora potrai girare l’asta per spremere il dentifricio.&nbsp;<ul><li>Grazie alla ruota dentata l’asta non riuscirà a girare nel verso sbagliato.</li><li>Troverai utile anche la forma rettangolare del corpo che ti consentirà di tenere il tuo dentifricio in piedi.</li></ul>&nbsp;Quando avrai utilizzato tutto il dentifricio, gira la ruota dentata in modo tale da liberare l&#39;asta ed estrarre il dentifricio.Come avrai intuito puoi utilizzarlo non solo per i prodotti da bagno ma per qualsiasi cosa come creme o salse.Quando lascerai la tua recensione allega una foto!

Toothpaste Squeezer and Stand

Why not ?

Jurdis

Self Watering Planter Pot&nbsp;You can pour the water directly onto the plate, from which it flows into the pot, or if you pour into the pot, the excess water will drain onto the plate.&nbsp;Note that due to the overlap of the ribs, when pouring water on a plate, be careful not to flood the water. Pour into several grooves a bit like swiping horizontally. If you want, you can scale the pot like 1 or 2 % smaller to create a better water flow to the plate.&nbsp;Size 180x180x150 mm - pot and plate together7 x 7 x 5,9 inchesScalable down and up!&nbsp;My own 120x120x120 growing pot fits inside this. If you use a growing pot inside, make sure the size of the model before printing. The bottom is moderately narrow. Scale if needed.&nbsp;It takes time to print all the features, but this is quite easy to print, so you can increase the print speed if the print time feels long.&nbsp;Hope you like this one! Happy printing!&nbsp;&nbsp;&nbsp;

Why not ?

Plantes