ShaydedReD

Loop

A-10 Thunderbolt 2 Silhouette Wall Art230x60x3mm

A-10 Thunderbolt 2 Silhouette Wall Art

aircraft

TheForg3d

The model is to be printed in split pieces and then glued together if required.This allows all users to print in multiple colour and styles.&nbsp;The original has been remixed as the lower section did not align with the pins, This has been adjusted to be more lore accurate. &nbsp;&nbsp;

Fallout Fusion core

props

PRINT3DGIFTS

Made this perfect fit for the Bambu Lab A1 Mini. Prints without support and only takes one plate! Enjoy and don't forget to post your makes!

T-Rex Skull A1 Mini perfect fit!

kids

jerod.bushman

Salty Engineering Marker Stand!&nbsp;This is a three part assembly which requires no supports during printing or glue for assembly. Simply print the three pieces and snap the Socket into the Base. The ASA adapter uses a 015 O-ring on the front, and a 016 O-ring Slid over the threads and up to the flat shoulder. The 016 O-Ring provides some squish/resistance to keep the marker stationary. The Socket feature uses an 18-Point Straight Spline interface which gives the maximum number of resting positions for the marker. It took a few iterations to get something worthy but here we are! &nbsp;Salty Printing Settings: -Base and Socket can be minimum 2 wall loops with minimum 15% endfill. -The ASA Adapter must be minimum 6 wall loops with minimum 15% endfill, or 2 wall loops with 50% endfill. The ASA Adapter sees a lot of bending moment due to the marker so care should be taken when printing this. -Salty Engineering uses PET-C for these stands, so if you're printing with another figment, we strongly suggest testing out your printing settings and filament prior to using the stand. &nbsp;ENJOY!

Salty Engineering Paintball Marker Stand

Paintball

Random.Elixir

I remixed the BearClaw Knife by Lord- @user_127415336.It&#39;s remixed to have an actual double-sided blade, not just one side and the other completely flat. I also added a little tang length to fit better in the palm. Use the print profile provided and it should be very strong, make it 100% infill if you want it even stronger. The file has 2 variations, one has a slightly thicker “Handle”Working on a tpu Cap for the tip of the blade so its pocket friendly.

Bearclaw Knife Remix

tools

fireboy02

Perfect DND Dice tower for all types of board games. Supports the D20 dice as well as many other dice!&nbsp;No supports needed 2 wall lines15% supportive cubic infill

Castle Dice Tower

tabletop

Jan 3D

Bambu Lab small Storage System&nbsp;Here we have an extension of the first storage system that was designed by me. The first set was about storing the parts that come with the printer from Bambu Lab. With this smaller box you can store parts that you can print yourself. Mainly useful parts that are needed for maintenance or replacement of PTFE connections.&nbsp;The demensions of the box are as follows: 117,5mmx95,5mmx33mm&nbsp;The following parts can be accommodated: - Bambu Disconnect Tools for AMS Power, AMS PTFE as well as Buffer Outlet Fork <a target="_blank" href="https://makerworld.com/de/models/14462#profileId-21419" rel="nofollow noopener">https://makerworld.com/de/models/14462#profileId-21419</a> - Tool Head Cover Hanger <a target="_blank" href="https://makerworld.com/de/models/17030#profileId-15789)" rel="nofollow noopener">https://makerworld.com/de/models/17030#profileId-15789)</a> - two Pro Clip Filament Chip / Low Profile <a target="_blank" href="https://makerworld.com/de/models/30298#profileId-33227" rel="nofollow noopener">https://makerworld.com/de/models/30298#profileId-33227</a> - Small parts like PTFE Connector or as shown in the picture Lubricant Grease or Thermal Grease.&nbsp;The goal was to design the box as space-saving as possible.The two parts are not joined together, the lid is just put on.&nbsp;Have fun printing!

Bambu Lab - Tools and Accessories Box

printer accessories

Fugge84

Hello community&nbsp;Today I have a replica of a Walther P22q gunThe toy weapon is printed without a hammer.&nbsp;The replica gun was printed entirely in PETG-CFThe ammunition was printed in PLA.&nbsp;&nbsp;Have fun printing

Walther P22q/Pistole/Weapon/Gun/replika/play gun

toys

modybird

Mini nuke container from fallout. Can be used as a prop or as storage. Minimal supports needed

Fallout Mini Nuke Twistable Container

storage

MikeD4bz

I call this “Dragon of the Sea” created with Hueforge. I used Sunlu Shiny Silk Grey and Bronze (Looks gold) but silver and gold can be used. I included layer heights if you want to experiment with other colors. I recommend changing the Orange if you do. Also included is a print profile for if you do not own an AMS, I added pauses to the appropriate layer heights for filament change. Let me know if you find any issues. Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Shiny Silk Sunlu Grey Transmission Distance: ? PLA+ Sunlu Sunny Orange Transmission Distance: ? -[Change this for your own accent color, or leave orange for original]- PLA Shiny Silk Sunlu Grey Transmission Distance: ? PLA Default White Transmission Distance: 5 PLA Shiny Silk Sunlu Bronze Transmission Distance: ? PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #8 (0.8mm) swap to Grey At layer #11 (1.04mm) swap to Orange At layer #15 (1.36mm) swap to Grey At layer #16 (1.44mm) swap to White At layer #19 (1.68mm) swap to Gold At layer #24 (2.08mm) swap to White for the rest. To use 5 filaments with 1 AMS: <img src="https://makerworld.bblmw.com/makerworld/draft/391147/2024-01-09_78b04eaa6db1f.png">&nbsp;Load up your AMS with your First 4 Colors of filament, having your 5th on standby.Select the AMS slot containing black for the 5th color. When Black layers are done printing, switch out the Black filament for 5th color.

Dragon of the sea, Silk Metallic HueForge 5 color, Customizable!

decor

jakubhroch

Contains 2 versionsAMS ready for multicolor print STL version for classic layer color change&nbsp;Default size 100x3mm&nbsp;RecommendNozzle: 0.4 mmLayer height: 0.2 mm