ShamDashka

Clucky

The Iron Throne remixed to have a smaller base to save some filament. This design prints with no supports, just slow down for overhangs and a little clean up may be required around the back side.

Iron Throne - No Supports

3DTechBase

I wanted to make a stable but beautiful building plate holder that, apart from being practical, can show the advantage of multi-color printing. I looked over the offer and made my own version by combining their advantages. Having refined the first version, the second version has already met my expectations, so I would like to share it with you.&nbsp;Easily holds up to 3 256x256 plates for the X and P series and A1 printers, the A1 mini version is also available (<a target="_blank" href="https://makerworld.com/en/models/180447#profileId-198570" rel="nofollow noopener">link)</a>! . The inscription and logo are made in such a way that they are not visible when printing in one color, but can be easily handled in Bambu Studio when printing in multiple colors.&nbsp;Try it and please let me know what you think! I hope you like it.&nbsp;If you like this 3D model and are able to, please consider supporting my work by &gt; <a target="_blank" href="https://buymeacoffee.com/3dtechbase" rel="nofollow noopener">buying me a coffee</a> &lt; your contribution will go a long way towards making future creations! Thank you for being a supporter!&nbsp;Compatible: X1 series P1 series A1&nbsp;If you are looking for a plate holder for the A1 mini (3 slot and 5 slot version), you can find it at the <a target="_blank" href="https://makerworld.com/en/models/180447#profileId-217681" rel="nofollow noopener">link here</a>.<figure class="image image_resized" style="width:37.59%;"><a href="https://makerworld.com/en/models/180447#profileId-217681" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173399/design/2024-02-22_2e7a488ac4753.jpg"></a><figcaption>Build plate holder A1 min 3 Slot</figcaption></figure><figure class="image image_resized" style="width:37.41%;"><a href="https://makerworld.com/en/models/180447#profileId-217681" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173399/design/2024-02-22_05393546ba097.jpg"></a><figcaption>Build plate holder A1 min 5 Slot</figcaption></figure>The matching poop holder is also available in three sizes! <a target="_blank" href="https://makerworld.com/en/models/191408#profileId-211326" rel="nofollow noopener">Link</a><figure class="image image_resized" style="width:36.83%;"><a href="https://makerworld.com/en/models/191408#profileId-211326" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173399/design/2024-02-19_b256f0b494fbe.jpg"></a></figure>and Build Plate Guide<figure class="image image_resized" style="width:35.56%;"><a href="https://makerworld.com/en/models/206386#profileId-226602" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173399/design/2024-02-26_430fade0d8dc4.jpg"></a><figcaption>Build Plate Guide for X1/P1 series</figcaption></figure>&nbsp;Build Plate Holder Printing: I used ABS material for the prototypes, but you can also use PLA material.Layer 0.2, 2 walls, 18% sparse infill density, adaptive cube, infill direction 75° Support allowed from own material (only used for the legs, see pictures) Support bottom Z distance 0.2 Support/object XY distance 0.35&nbsp;Other materials used: 4 x D10 anti-slip disc (optional)&nbsp;Update 02.06.2024. - V3.1<ul><li>I modified some roundings and increased the length of the tray space by 1 mm. Although I didn&#39;t experience it when printed on another printer, they found that the tray stuck a little in place. I fixed the problem.</li></ul>Update 02.08.2024. - V3.2<ul><li>I made it easier to insert the building plates and increased the size of the Bambu Lab logo on the side. I also made the 5 slot versions and single color versions print profile.</li></ul>Update 02.10.2024. - V3.2 - A1 mini<ul><li>I also made a version suitable for the <a target="_blank" href="https://makerworld.com/en/models/180447#profileId-198564" rel="nofollow noopener">A1 mini</a>, thanks again to Sam Bossert for the A1 mini plate dimensions! From there it was easy, apart from the width, the plate holder is completely identical to the holder for the X1 / P1 series and A1.</li></ul>Update 02.21.2024. - V3.3 - A1 mini 5xI received a request to make a 5-slot version to A1 mini, so I made it for you. I hope you like it! <a target="_blank" href="https://makerworld.com/en/models/180447#profileId-217681" rel="nofollow noopener">link</a> in the description.

Build Plate Holder, X1 / P1 series, A1 and A1 mini

Bambu Lab A1 Zubehör

JAV-3D

Das 3D-gedruckte Willy Wonka Golden Ticket zeigt die ikonische Vorderseite aus dem Film "Charlie und die Schokoladenfabrik" von 2005. Durch nur 4 gedruckte Schichten bleibt eine gewisse Flexibilität erhalten, wodurch es ideal als Lesezeichen oder Dekoration genutzt werden kann.Teil 1: Design und AuthentizitätDas Design ist detailgetreu dem Goldenen Ticket aus dem Film nachempfunden, um die Authentizität zu bewahren. Die wichtigsten Merkmale, wie Schriftart und Grafiken, wurden sorgfältig übernommen.Teil 2: Material und DruckeinstellungenNormales PLA-Filament ist für diesen Druck empfohlen. Die Druckeinstellungen sollten darauf abzielen, klare Details und eine saubere Oberfläche zu erzielen.Teil 3: Anwendung und NutzungsmöglichkeitenDas Willy Wonka Golden Ticket kann als charmantes Lesezeichen verwendet oder in einem Rahmen als Dekoration präsentiert werden. Die Flexibilität ermöglicht vielseitige Anwendungen.Teil 4: Personalisierung und VariantenJe nach Vorlieben kann die Größe des Tickets angepasst werden. Kreative Nutzer können auch verschiedene Farbvarianten oder Texturen erkunden, um ein einzigartiges Ergebnis zu erzielen.Zusammenfassung: Das 3D-gedruckte Willy Wonka Golden Ticket ist eine liebevolle Hommage an den Filmklassiker. Mit seiner Flexibilität eignet es sich perfekt als vielseitiges Lesezeichen oder charmante Dekoration.&nbsp;&nbsp;English:3D Print Guide: Willy Wonka Golden TicketIntroduction: The 3D-printed Willy Wonka Golden Ticket features the iconic front side from the 2005 film "Charlie and the Chocolate Factory." With only 4 printed layers, it retains some flexibility, making it perfect as a bookmark or decoration.Part 1: Design and AuthenticityThe design closely replicates the Golden Ticket from the film to maintain authenticity. Key features, such as font and graphics, have been meticulously incorporated.Part 2: Material and Print SettingsNormal PLA filament is recommended for this print. Print settings should aim for clear details and a clean surface.Part 3: Application and UsesThe Willy Wonka Golden Ticket can be used as a charming bookmark or displayed in a frame as decoration. Its flexibility allows for versatile applications.Part 4: Personalization and VariantsDepending on preferences, the size of the ticket can be adjusted. Creative users can explore different color variations or textures to achieve a unique result.Summary: The 3D-printed Willy Wonka Golden Ticket is a delightful homage to the film classic. With some flexibility, it is perfect as a versatile bookmark or charming decoration.

Willy Wonka golden Ticket with Profile for both Sides

Funny Stuff

FelixK

Hello everyoneMy fiancée needed a box for her perfumes in the Ikea ENHET cupboard. Since I couldn't find a suitable on. My Model was printed with “Creality Ender PLA in White” Printed with BambuLab P1S 0.4 Nozzle LayerHeight: 0.28mm Infill: 15% Gyroid Reduced First Layer, First Layer infill, Overhangs

Storage Box (Honeycomb Style)

usable stuff

220prints

Disney's Aladdin lamp 

Marvel/Disney

3D Geek House

No supports .28 layer I have set the base to print with 35% lightning infill to save filament but you can set your own infill without any problem Led ring and lidn snaps in perfectly  just used some glue to hold ring to base (a couple of hot glue drops holds in perfectly and its fairly easy to remove in case you need to take it apart) (you can support my work on cults! <a target="_blank" href="https://cults3d.com/:1979819" rel="nofollow noopener">https://cults3d.com/:1979819</a> Thanks!)

GOT

Bambu Lab A1 Zubehör

Funny Stuff

usable stuff

Marvel/Disney

WizWorld