I built a cab only version of the wtmicro willys body and wanted to add some scale flare so I designed this exhaust stack. Stack can be glued where needed, the flat sides also allow it to be used as side pipes if desired, or get creative with placement for other possible uses! Roughly 1:24 scale, should also be very usable for 1:18 or similar scales.

This is a scale 10lb nitrous bottle with bracket. Intended for 1/24 scale crawlers or other 1/24 scale models, drift cars, anything you want really in that scale range. The actual model is slightly larger than 1/24 scale, somewhere between 1/20 and 1/24 as it's what looked “correct” to me when installed on my crawler, wanted it for a speedy little micro crawler I'm building since they typically aren't all that fast lol.

Updated 2/27/25 to have smaller slots, and added a couple to account for the lost airflow volume. Should have less concerns over beads falling out now.

Small desiccant jar to fill with desiccant beads and keep in a safe for humidity control.

I didn't like how the MB24 spare tire looked when the wheels and tires I run were much larger, so I designed a fuel cell to take its place!