Setkio

Rambo7641

Update 29/02/2023 <ul><li>Added Sizing Ring</li><li>New Instructions </li><li>Optimized Print Time ( 14 hours insted of 16)</li></ul>

Iron Man MK3 Articulated Helmet

helmet

Downhill_Solutions

UPDATED V2 This upgrade contins:-better filament line routing (more straight / less clamping force)-optimized for AMS Riser-nicer look of BUS-cable routing-easyer print without supports&nbsp;"cable organiser for the backside of the P1S with AMS on the top.Should fit in P1P (upgraded thith glas top shield) / X1 / X1C.You have to change the casing screw on the left upper plate with a longer one which is include with the Bambu Lab Printer.Maybe you need to optimise the file for other filaments.The Pin is made to fit in the underside of the cable organiser to arrited in the 3mm hole in the printer casing."

Cable Organizer V2 (AMS Riser Option)

bambu

UniversalMaker

A simple clip for your glasses. Build mostly for sun glasses. Should fit most cars.&nbsp;<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/853965/2024-04-14_1ee1ac588a7c6.webp"></figure>I have also designed a practical seat mounted hook in the same style: <a target="_blank" href="https://makerworld.com/en/models/420776#profileId-323486" rel="nofollow noopener">https://makerworld.com/en/models/420776#profileId-323486</a> &nbsp;<blockquote>Disclaimer: These 3D printing files are provided “as is” for informational purposes. We make no warranties, and their use is at your own risk. Always exercise caution and consult professionals when needed. 🛠️🔍</blockquote>&nbsp;

Car Glasses Clip

michael.tavel

This is a remix of a Nespresso original pod/capsule holder. It holds 5 original Nespresso coffee pods and can be mounted using 6mm or 8mm disk magnets, or any other adhesive, double sided tape, etc.&nbsp;I made the following revisions to the original model:<ul><li>Added thickness to add some structure and holes for magnets<ul><li>Recess for the magnets is ~2.5mm</li><li>2mm thick magnets will be VERY SLIGHTLY inset, and work fine. </li><li>3mm thick magnets will just barely stick out but work perfectly as well.</li></ul></li><li>Revised the track the pods slide in to make it easier to remove them from the top or the bottom</li><li>Revised the ‘pod stopper’ at the bottom to better retain the pods when dropped in but still allow easy removal from the bottom.</li></ul>

Nespresso Original Capsule/Pod Holder (Magnetic)

home

Sepcot

A Christmas Tree puzzle box! Add a little challenge to small holiday gifts. Inner dimensions: 23mm diameter opening with 80mm depth.&nbsp;The puzzle box was generated on <a target="_blank" href="https://www.me.uk/puzzlebox/" rel="nofollow noopener">https://www.me.uk/puzzlebox/</a> with the following settings: 2m-1N-25b-23c-84h-1B6-0G4-1w2-2t-5z-1M-3X-0p7-0g1-2r-2R-e-Z-1T-0y1-0Z2. The 0.1mm general x/y clearance and 5mm maze spacing generates a puzzle that feels good in the hand with a very satisfying click into place to close the box.&nbsp;For the remix, I tweaked the inner puzzle box to create the tree stand look and hollowed out the base. Then, embedded the outer puzzle box into a scaled version (1.8x) of the spiral tree.

Christmas Tree Puzzle Box

regal

Make It 3D PR

Camara CCTV Base Dome V1

cctv

Spike_Mix

This fish tank accessory creates a space under your tank&#39;s soil for your pets to hide where you continue to watch them as they play and feed. In this remix I added a floor to the cave to prevent sand from entering from underneath and a lip to help the cave anchor down. Original: https://makerworld.com/en/models/180637#profileId-225858Dimensions: <ul><li>W 15cm x D 15cm x H 10cm</li><li>3mm thick walls</li></ul>Materials: Pick materials that are safe for both your fish and plants. It&#39;s usually recommended to use ABS or specific food-safe PLA, and it&#39;s often advised to coat the print in a safe epoxy to seal it. To legally sell PRINTED models, you may obtain my permission through this link: <a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

helmet

bambu

e30

home

regal

cctv

acuari