Setheronie

0.8mm nozzle, 0.4mm layer, 2 walls, 15% infill

Crypto Stamping Jig --- M8 x 24 x 2mm Flat Washer

0.28mm layer, 2 walls, 15% infill

Runescape Dragon Dagger (P++)

PLA - 0.16mm layer, 3 walls, 5% infill

Smiling Face Pot

0.2mm layer, 2 walls, 15% infill, snug supports

Wall mount - Traditional Japanese Hannya Oni Mask

0.12mm layer, 2 walls, 10% infill

Traditional Japanese Hannya Oni Mask

0.16mm layer, 4 walls, 0.5mm cards, 1.5mm letters

Recipe Card Dividers - 3 x 5 (130mm x 90mm)

0.2mm layer, 2 walls, 15% infill

Jango Fett Print

sagat

Fading - Blending comb

NO supports - 0.2mm layer, 3 walls, 100% infill 

I used Overture's Super PLA+ with 70mm/s print speeds and 60c print bed. Turned out great!

JustBe 3D Printing

Buzz Lightyear(Multi-Colored)

200mm, 4 color, 0.08mm layer, 1 walls, 100% infill

Took a second to figure out how to change the color swaps with the AMS, but worked great and came out great!
I even used Overtures pla+ with my unique filament speed for the black and worked like a charm!

SesameMakes

Compact Wall Hook

wuguigui

Swatter

Swatter-PLA-No Logo

i love this one! 
best swatter out there!
i used overtures pla+

Coronado

12 Hole Ocarina

Budwin

Textured  Eye Pack For DeadPool Textured Helmets

Please Read Description: 0.2mm layer, 3 walls, 10% infill

It turned out great! I just forgot to upscale the eyes to 102%. oh well. I used overture pla+ and printed it slow.

Billy Hooper

Rose

looks good.
I used bambu matte red pla
painted the stem green.

Recko

Ceiling Fan Pull Chains Charms

(Pack of 2) - AMS

Deadpool 3 Movie Helmet Textured

works well. 
somewhat difficult to glue with same size, could be upscaled a bit.

jkoppee

cub scout statue bear

0.16mm layer, 2 walls, 15% infill

building supports on plate only turns out a lot better for the emblems on the side. also, painted a bunch of supports because they didn't even need supports with 0.2mm nozzle. 
came out perfect after some hassle after 2nd attempt.
I gave away the perfect one. pictured is first attempt that still looks adequate..

TsiTsi

A Straight Up Shallow Pumpkin

0.2mm layer, 3 walls, 25% infill

scaled different, but turned out nice. and painted with proper colors.

agepbiz

Minimalistic Xbox Controller Stand

Adaptative infill 0.2mm layer, 2 walls

Prime Tower Designs

The Haunted Lincoln Illusion

No lamp - regular size

some drooping at the top but worked out fine. not an issue.

peterkova2

Fly swatter

0.2mm layer, 3 walls, 15% infill

Reality Printing

Snail Skull

0.16mm layer, 3 walls, 10% infill

I tried something new and tried printing the shell completely hollow and only the snail with infil. didn't work out so I cut a hole on top.
printed great though!

Sevro

Thunder Boat Kit 010

Big Version

printed really fast, but may need some supports to prevent the droop in the back.

Stag 3D

Universal Carabiner

0.2mm layer, 2 walls, 30% infill

Best carabiner I've used yet that I printed.

chiz_m

EZ A1 PTFE Remover Tool

Vertically oriented thumb press part

sopalajakub

Laptop stand with maximum airflow

Really solid, the bars were tough to slide in, but requires no glue! Super easy and great design. printed for my Mom.

CoNcLuZiOn

Decor - Dancer

0.2mm layer, 2 walls, 15% infill dancer

These turned out nice, maybe a little thin and brittle though.