SepDoks

dallasstarsfan

I wanted to easily attach and remove the P1Touch screen in case I needed to tinker with it. I was using a snap on faceplate for the original screen, so I merged it with some other files and filled in some gaps. I added the logo as separate bodies so I could print in multiple colors. When you open the file, select yes when Bambu Studio asks if the file be loaded as a single object with multiple parts. For single color print (no logo), print in one color or use the recessed logo version (untested).For multi color print, select the objects tab and set the screen bezel to color 2. Used M2.5x10mm machine screws to secure the back to the bezel. First time posting a remix, so be gentle in the comments. I am still figuring out Fusion360.***Update V3***Extended cutout on bottom for access to temp sensor and I/O add-on connections. Saw a video of a temp sensor working and figured that is where it would need to plug in.***Update V2***Added cutout to allow for microSD card. Read that an upcoming P1Touch update will need the card.&nbsp;

XTouch (P1Touch) Mount Dual Screen

upgade

Extrutim

This is a remix, the original design was created by <a target="_blank" href="https://www.printables.com/social/62181-linearrelation/about" rel="nofollow noopener">LinearRelation</a> and can be found <a target="_blank" href="https://www.printables.com/model/111326-filament-swatch-library/comments" rel="nofollow noopener">here</a>.I have modified the model according to my wishes and additionally created a version which is printed in two parts and connected with two M3x30 screws, as well as a version which fits on the Prusa Mini and one with only 20 slots for samples. The other will hold 30 filament samples. I enlarged the holes for the four magnets, now 6x3mm magnets fit inside. For this, a pause is inserted in the slicer at a height of 22.2mm and then the magnet inserted with some glue or tape.&nbsp;I have slightly enlarged the filament samples, there are two versions. One version with different layer thicknesses to show the light transmission and a flat version from which you can make an infillsample. Print it with 5 wall lines but without top and bottom layers. Of course you can also use <a target="_blank" href="https://www.printables.com/model/111326-filament-swatch-library/files" rel="nofollow noopener">the original samples</a> if you want to use the ettikets LinearRelation has linked.Furthermore, the box was slightly widened, since the outer slots in the area of the magnetic closure were somewhat narrower. In addition, the cards are now guided in the front and back, so that it looks neater.&nbsp;What you need:<ul><li>2 M3x30 screws, if you don't print the print-in-place version.</li><li>4 round 6x3mm magnets (make sure you insert them with the right polarity!)</li><li>Some glue or tape to keep the magnets in place while the hotend moves over them.</li></ul>Tip: You can also use shorter screws. Not ideal, but works as well.&nbsp;Please leave a like if you enjoy my design. Also feel free to <a target="_blank" href="https://www.printables.com/social/38556-extrutim/models?o=liked" rel="nofollow noopener">check out my other uploads.</a> :)

upgade

things