Selah The Crusader

Helvedo

Helloi was looking for a controller Stand for my new Xbox Elite 2 Controller but couldnt find one, so i designed one myself.It includes the magnetic dock that comes with the controller, but it tilts it abit so it matches the other stands I have at my tv.I am using a 90° ankle adapter with the original cable, so that its not visible from the frontI also added 4 14mm holes for rubber feet.The magnetic doc should fit tightly and wont fall out. I tried it in PLA and PETG.i printed it with 0,12mm layer height to look good, but 0,2mm will also work without any supports. I only had issues with the overhangs when i used 0,28mm.&nbsp;I hope some of you have the same fun with it as i had making it.

Xbox Elite 2 Controller Stand for magnetic dock

Gaming Stuff

For gifts

Kit Crafters

<h2>Handheld Trebuchet</h2><h3>Send marbles flying!</h3>While this bad boy can&#39;t throw a 90 kilogram projectile over 300 meters, it does pretty well for a handheld machine. Print out this simple model kit to assemble your own trebuchet that launches marbles and other small objects soaring through the air.&nbsp;This model needs no glue or supports to assemble and print and the whole kit fits on the bed of the A1 mini!&nbsp;To operate the trebuchet, you&#39;ll need to fill the counterweight bucket with something heavy. I used 10mm steel balls as both the counterweight and the payload (these are the same as the Hextraction balls). After filling the counterweight, you can pull back the lever to have it latch into place with the compliant mechanism. Add the payload to the cup on the lever and pull back the compliant mechanism to release the lever to let your payload fly!&nbsp;There are several options for the kit including different sized counterweight buckets and counterweight rods. By default, the profiles include the large bucket and the normal rod. If you&#39;d like the smaller bucket and a rod that sets the launch angle to 45 degrees, you can find it in the model files.&nbsp;P.S. I tried my best to create a sling for the lever that was 3D printable but alas, none of the ideas worked out. At least this is still fully gravity powered!

Handheld Trebuchet - Model Kit

Model Set

uhltimate

Description:Introducing our innovative Disc Shooter – a print-in-place marvel that launches discs over 10 meters! This cutting-edge design requires no assembly, providing instant shooting excitement.&nbsp;Features:<ul><li>Print-in-Place Magic: No assembly hassles. Print it, and it's ready to shoot!</li><li>Impressive Range: Launch discs with precision over 10 meters.</li><li>Quick and Easy Reload: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>&nbsp;Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Mesmerizing Discs with colorized pattern by @BamBam Design<a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/312570/2023-11-15_c5ba731bcdf4d.gif"></figure>

Disc Shooter - with Performance - Print-in-Place Design

Toys

agepbiz

Print-in-place and Articulated Surprise Egg #1 - Tiny Haul Truck 'Making of' video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=baKauAFH-lI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/baKauAFH-lI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>*edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue)Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.Both the truck and the egg was each designed to be printed as all-in-one objects without any support structures. The truck has rotatable wheels and a tiltable bed. The egg is hinged&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a> WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>Unassociated tags: surprise egg<h3>Category: Toys & Games Print Settings</h3>Rafts: NoSupports: NoResolution: 0,1Infill: 40

Surprise Egg #1 - Tiny Haul Truck

Surprise Eggs

Willi 3D

Create a pit droid …. or more! (They work better in groups.)&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD of a pit droid. Scale 1:10&nbsp;Update:(24/08/23) <ul><li>optimized printability of the pelvis</li></ul>(18/08/23) <ul><li>optimized upper leg to pelvis fit</li></ul>Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly: The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult and the parts can break. Follow the instructions in the picture.

Kit Card Pit Droid Star Wars

Star Wars

PrinttX

Holds both pages open while using one Hand 1 size fits all&nbsp;Infill 15-65%0.2mm layer height

Page Book Holder / One Hand Book Holder / Reading Holder

For Katie

<h2>MINI-CITY</h2>Welcome to MINI-CITY, where you create and customize your own city from the ground up. Starting with a tileable base plate, you can print out an array of building from a wide variety to choose from to begin piecing together your very own miniature metropolis. This first set of the MINI-CITY series comes with a modern house series, an apartment complex series, a tower series, an office series, and miscellaneous buildings to complete your very own city.&nbsp;Let me know what you think! I plan to make more buildings, baseplates, and other additions to this series and your support is greatly appreciated!<h3>Instructions:</h3>To make sure your building fit well into the base plate, try printing the fitment test profile to see if you need to adjust your X-Y hole compensation/contour compensation.&nbsp;This is my setting for SUNLU PLA+. The Bambu Lab PLA Basic filament works well with the default settings. <img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_7867989c75297.png">&nbsp;After your fitment test, try printing out one of the building series with a base plate or the profile with one of every building! The profiles provided have a color change right where the building starts to print so that the ground can be a color of your choosing and the building can be a different color. All buildings have the same color transition, thus minimizing the number of color changes to just one!&nbsp;There are several baseplates available, the largest one includes a hill, slanted streets, and the ability to connect with more baseplates.&nbsp;Try mirroring any of the buildings and baseplates to add variety and depth to your city as well.&nbsp;<h3>Modern House Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_c0dd505587ddb.jpg"></figure><h3>Apartment Complex Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_6ffa89a71cbad.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_446e131b2fd4f.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_cc90e3ce08d95.jpg"></figure><h3>Tower Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_8d10d5e35d404.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_e8740fe92ecaa.jpg"></figure><h3>Office Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_50d7b0bdf33d9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_e737526f6ac7c.jpg"></figure><h3>Misc. Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_0f6754d483f74.jpg"></figure>