Scottj21

Lobo

I was looking to make a quick dust pan with as minimal filament as possible. I printed this at 100% on a 0.4 nozzle using variable layer height (smallest for the first few layers and then 0.28 the rest). It printed in about an hour and a half on a P1S.

Dust Pan - Simple small dust pan

Practical?

75echo

Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports.There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and even the dragon eggs to add some life to it. EnjoyUpdate: I have added a revised scaled up STL and Gcode version at 120% if you have a larger dragon

'Gem rock' mount for your articulating dragon

Dragons

MingGY

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497581/design/2024-06-16_4792efd972b5d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497581/design/2024-06-16_7a8db6f5ec1d4.jpg"></figure>这个工具收纳盒模型是专为Bambu Lab的P1/X1机型设计的3D打印收纳解决方案。打印完成后，无需任何五金件即可直接使用。该收纳盒设计现代简约，功能性强，可用于整理和存放工具零件，确保您的工作空间整洁有序。&nbsp;你的支持是我持续创作的最大动力。如果喜欢我的作品，请给予支持；如果对模型有任何建议，请留言。我将根据大家的反馈，不断改进下一版模型。<h3>特别提示：如果您觉得锁扣太紧，可以使用锉刀适当打磨锁扣部分，以获得更好的使用体验。</h3>&nbsp;尺寸： 16.3×9.5×5.6 cm&nbsp;This tool storage box model is a 3D printing solution specifically designed for Bambu Lab&#39;s P1 or X1 models. Once printed, it can be used immediately without any hardware assembly. The storage box features a modern and minimalist design, providing strong functionality for organizing and storing tool parts, ensuring your workspace remains neat and orderly.&nbsp;Your support is my greatest motivation to keep creating. If you enjoy my work, please show your support. If you have any suggestions for the models, please leave a comment. I will incorporate everyone&#39;s feedback to improve the next version of the models.<h3>Special Note: If you find the latches too tight, you can use a file to slightly sand down the latch area for a better fit.</h3>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497581/design/2024-06-16_94fef8c38a3dc.jpg"></figure>&nbsp;&nbsp;&nbsp;

Bambu Accessory Box-P1/X1-No Hardware Needed

impietro

I designed this mechanical paradox for fun. I like mechanics, physics, engineering.... I think this model is a very good representation of the force of gravity. I am passionate about these models, by printing it you can show it to your children, for them it will seem something magical, almost a magic trick. I have created a print profile with all the settings already set. I printed with the a1 mini, I created this model so small that it can also be printed with small printing plates. <ul><li>I printed the frame with the part where the cones slide facing downwards, in this way the surface will be nice and smooth, facilitating sliding and avoiding friction.</li><li>For the frame I also used brim, as the contact surface between the model and the platter is minimal. With brim you prevent the model from deforming during printing or even detaching</li><li>The two cones are joined by a cylinder that must be inserted inside, they must be printed with at least 80% filling, the greater weight will make the project work better. I used it as a gyriode plot.</li><li>I printed everything in petg, this material for me has a very good aesthetic result and is smoother than pla.</li></ul>I hope you like it, if you print it I would appreciate a comment or a recension, thanks. :)

Practical?

Dragons

P1S

Science Prints