Scorsese

Simply Models

Ive designed this to help with re-spooling filament onto bambu re-usable spools. It has a small filament holding hole which holds the filament snug while the initial layer is pulled onto the the bambu spool, this has worked wonders for me so I thought id share it to help others.&nbsp;Tested to fit the All bambu spools.&nbsp;Recommended material; ABS&nbsp;Build Plate; Bambu High Temp Plate, The rough base finish using PEI Plate is ok but not Ideal.&nbsp;Changes on Bambu Studio; 0.2mm standard layer height, 2 wall loops, Sparse infill density 25%, Sparse infill pattern Gyroid, Supports OFF, Brim OFF.

Bambu Lab Spool Centre Sleeve with Filament Hole Great for respooling Recommended Print Material ABS

printer addons

Masamune

A cable safe which does not bend the cable too much and is easy to open again.There're several versions available for different cable lengths. The first Number is the approx. cable length and the second Number the height.You can print these with PLA or PETG and a 0.2 mm layer height. No Supports.I used the Octagram Spiral as Top and Bottom fill pattern.

cable organizer

Cable mangement

tr3dcreations

Christmas Tree Decor 

Cristmas decorations

GlennovitS 3D

<figure class="table"><table style="border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:4px solid rgb(230, 153, 77);padding:0.4em;">Welcome to GlennovitS3D - fun models for everyone! Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models.<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 😁</td></tr></tbody></table></figure>&nbsp;<figure class="image image_resized image-style-side" style="width:35.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/862175/2024-01-22_1cb770cb3d13c.jpeg"></figure>Tested by thousands! Thank you all!! If you want new exclusive textures, check this one out: <a target="_blank" href="https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni" rel="nofollow noopener">https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni</a>There is also a new Keychain version available - check it out here:<a target="_blank" href="https://makerworld.com/en/models/153538#profileId-167762" rel="nofollow noopener">https://makerworld.com/en/models/153538#profileId-167762</a>&nbsp;This might be your future favorite fidget toy - rotating rings with textures - spin them and enjoy!Print the different styles and find your personal favorite - and then give the other prints as gifts ;-) Fits perfectly in a pocket, purse, desktop drawer or right there on your desk.<h2>Overview</h2><figure class="image image_resized image-style-side" style="width:35.05%;"><img src="https://media.printables.com/media/prints/648943/rich_content/64141802-8002-47e7-89e3-0c012c6551ec/thumbs/cover/800x600/jpeg/img_8321.webp"></figure>The Tactile Fidget Rings toy comes in multiple styles.<ul><li>Basic (just the rings - no textures)</li><li>Lines (tilted almost-vertical lines)</li><li>Knurled (for extra “grippynes”)</li><li>Layers (simulating thick 3D printing layers)</li><li>Honeycomb (hexagonal textures)</li></ul>If also comes in 4 MIX versions! In the mix versions, every ring has a different texture for you to enjoy. Which one is your favorite - please share and comment!<h2>Assembly</h2>None! This is print-in-place :-)<h2>Print instructions</h2>Here is a few ideas for slicer-settings:<ul><li>Speed on first layer: 50% (To ensure good bed adhesion take your time here!)</li><li>Supports: NO supports</li><li>Brim: NO brim</li></ul>Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Tactile Fidget Rings (spinning fun toy)

Fidgets

jori.helin

For easier use of <a href="https://www.s-bag.com/s-bag/?p=int" rel="nofollow">S-bags </a>on the Roborock S8 Pro Ultra base station. Adapter made previously worked just fine, untill bag got overly full and made a blockage through the adapter plate.This version replaces original bag holder tower from the base station with one that accepts S-bags directly and no more issues removing the bag when it's full.This is V1, still in testing.No permanent modifications required to the base station. Accepts S-bags without modification.<ul><li>Print all 3 pieces. </li><li>Use 2 M4x20 screws and nuts to attach lock to the tower.</li><li>Remove old tower from the base station by unscrewing 3 screws.</li><li>Install new tower using original screws.</li><li>Install S-bag by sliding bottom in and press sides against the tower.</li><li>Slide the lock in place.</li></ul>&nbsp;&nbsp;Coffee? https://ko-fi.com/jorihelin(I take no responsibility if you break your base station or any other issues that could arise from using the model. Print and use with your own risk.)

Roborock S8 Pro Ultra S-Bag tower

Roborock

Ken Mills

This remote holder is reminiscent of an amphitheater or stage. Four remotes can be stored around a stack of handy coasters. The shell design keeps the holder light-weight and saves material and printing time.&nbsp;The coaster profile is set for zero top and bottom layers to expose the 10% honeycomb infill. Feel free to experiment with the infill pattern and density, and top / bottom layers for achieve different effects. You can also use other circular coaster models, just be sure to scale them to 99mm or less to fit the holder.

printer addons

Cable mangement

Cristmas decorations

Fidgets

Roborock

trays