Samuel_Hao

manicman

I am making a carrying case for all my bike equipement and I needed a garmin mount. I made this and it works perfectly and it'll mount to my carrying case.

Garmin Mount

Bicycle

Josh-3D

<h3>Model</h3>A phone stand to go along with the<a target="_blank" href="https://makerworld.com/en/models/189326#profileId-208776" rel="nofollow noopener"> Headphone stand I made!</a> A few people had suggested this, so figured why not?&nbsp;Model is featured in Bambu PLA Matte Charcoal, and Bambu Iridium Gold Metallic for the main print. For the second print, it is featured in Bambu Charcoal and Polymaker Muted White.&nbsp;(Keep scrolling past the updates for required hardware and assembly instructions!) &nbsp;[Update 1]I added a step file for the main phone holder, to the raw files, to make it easier to adjust for other sized phones/devices that don't fit into the holder as it is now! If you modify the phone holder portion, please share! You can include the modified holder as a new print profile (No need to donate points, you did the tweak!), or if you'd prefer, you can just post it as it's own object. Just send me a link, and I'll add it in the description here to help make sure people find it.<figure class="image image_resized" style="width:30.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-26_265822ae21a7.png"></figure>[Update 2]I added a print profile that provides a variation on the holder part, adding in holes on the bottom to better allow for a speakers/mic to work without interference, as a user had requested one. <figure class="image image_resized" style="width:30.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_a1b94dad29915.png"></figure>[Community Spotlight]Thanks to <a target="_blank" href="https://makerworld.com/en/u/1489256341" rel="nofollow noopener">o.0jack</a> for the a1 mini profile<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_ada1894ffcacd.png"></figure><a target="_blank" href="https://makerworld.com/en/u/4171661601" rel="nofollow noopener">rakibby </a>has provided a version of the holder that's a little deeper (17mm!) so if you've got a thicker phone, check out rakibby's print profile! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_1fd7a9c8d8b06.png"></figure><a target="_blank" href="https://makerworld.com/en/u/11128021" rel="nofollow noopener">KYZ Design</a> has made us a <a target="_blank" href="https://makerworld.com/en/models/217683#profileId-236629" rel="nofollow noopener">TPU Sock</a> to help keep the stand in place. They look great and match the style! <figure class="image image_resized" style="width:29.75%;"><a href="https://makerworld.com/en/models/217683#profileId-236629" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-03-01_7d2974c2e301d.png"></a></figure>&nbsp;[Tools & Assembly]Like the Headphone stand, the cell phone stand is pretty easy. You'll need the following hardware and tools.I designed this to use M3 socket cap screws.Hardware Needed:M3x12 - 4 (used for the feet)M3x25 - 3 (Used to connect the swing arm to the stand, and the phone holder to the swing arm)M3x30 - 1 (Used for the knob for the swing arm)M3xNuts x 9 (The knob makes use of two nuts!)Tools Needed:Hex DriverDrill bit for clearing holes&nbsp;Start by drilling out the holes in the feet and knob. These holes were partially blocked to get a cleaner print. All the other holes should be sized that a M3 screw can fit through without being too tight, but things like variation in filament properties might make the holes tight, so if you can't freely push a screw through the holes in the frame, clear them out with an appropriately sized drill too.<figure class="image image_resized" style="width:49.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_dee28ae5b0db5.png"></figure>Next, Prepare the knob! We'll feed a M3x30 screw through the hole and through a nut that'll be embedded on the other side of the knob. Tighten it down!<figure class="image image_resized" style="width:61.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_27826e74eb785.png"></figure>Now we'll assemble the main frame! There's embedded slots for all of the M3 nuts, so go ahead and prepare by putting all the nuts in place. Next, we'll install the feet, as once the holder and swing arm are on, it can obstruct access to the screws for the front feet. Use M3x12 screws for the feet! For the swing arm, attach the two phone holder sides using M3x25 screws. Attach the arm to the base using a M3x25mm screw, but make sure not to over tighten it as we don't want the hing to be too stiff! Lastly, install the knob through the guide and swing arm and tighten it down!<figure class="image image_resized" style="width:73.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_9f8ad10fc9a09.png"></figure>-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.

Phone Stand - Industrial 

GoodDesign

Lipoma

Minimalist wire holder to aid in soldering. Printed on an un tuned CR-10, so this will look great on a bambu printer.

Bicycle

GoodDesign

Soldering