Sadowskitodd

cathrinedmarie

Coffee latte earrings 

Earrings

liljohn406

I have created a drawer system that will integrate onto most riser systems (if they sit flush around the inner ring). Or even no need for a riser. There is an adapter ring that will hold the glass if you want.This is built off the Gridifinty Dimensions. So any inserts that are based off that should work. (I used the inserts from the FOBOS system Works perfectly)&nbsp;Five sets of Drawer sizes.<ol><li>1 wide x 5 long x 5 Tall</li><li>1 Wide x 5 long x 10 tall</li><li>2 wide x 5 long x 5 Tall</li><li>2 Wide x 5 long x 10 tall</li><li>62mm wide x210mm long x 71mm tall. This one was made specifically for the small Bambu Spare Part cardboard Boxes.</li></ol>&nbsp;There are 4 different cabinet styles. All mirrored so you can pick and choose what works best for your set up.<ol><li>3 small Gridfinity Drawers + the Bambu spares drawer</li><li>3 small Gridfinity Drawers + a tall Gridfinity Drawer</li><li>3 small double wide Gridfinity Drawers + a tall double wide Gridfinity Drawer</li><li>A cubby hole plate holder. I am using it to stash the bag of extra PTFA tubing I have for my AMS with a plate holder on the side. Should hold 3-6 plates.</li></ol>The adapter uses pegs and holes to hold it together. The gap is snug around the top lip. I wanted it to be a tight fit to decrease any movement. I used CA glue on the pegs to ensure it is secure. There are nameplates if you want to create labels for the drawer handles.Sorry no fancy renders, I prefer to take real pics of the real outcome of my models. Nothing worse than downloading a model spending a bunch of time and filament on a project that looked awesome in a render only to find out the end product is a let down. &nbsp;**ALSO CHECK OUT THE RISER I CREATED IN THE PIC HERE**https://makerworld.com/en/models/185439#profileId-204181&nbsp;Thanks

Riser Drawer System 

Printer Accessories

Lilac Rage

Star Wars Rebel Alliance Logo Keychain - Cutout VersionSet filament swap at 2.8mm layer height.&nbsp;----------------If you like my stuff, check out my patreon<a target="_blank" href="https://www.patreon.com/LilacRage" rel="nofollow noopener">https://www.patreon.com/LilacRage</a>

Star Wars Rebel Keychain - Color Swap

Key Chains

BamBam Design

<h4>Toroidal Windmill - Self adjusting turbine</h4>Looks like a spinning flower and no much wind is needed.<a target="_blank" href="https://youtube.com/shorts/WrKHW2Cdyvk?si=byQ_EpJAfOOy8x7F" rel="nofollow noopener">YouTube Short</a>&nbsp;<ul><li>Beautiful Windmill with toroidal Propeller Blades</li><li>Self adjusting to wind direction (Tail Blade Reworked)</li><li>100% printed, no Screws or tools needed</li><li>You can add 3 Propellers on one Axle with 2 distances</li><li>Full customizable with different propeller sizes and directions (I plan to add more cool propeller types as well)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>You can choose Propellers from 3 Print Profiles<ul><li>Basic Parts with Left&amp; Right Propeller to choose</li><li>Additional Propeller Blades</li><li>Additional Slower Propeller *New</li></ul>You can mix the propellers from these profiles.<ul><li>added one profile for A1mini without the biggest blade as well</li></ul>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;PETG &amp; PLA tested👍🏼<h4>Assembly:</h4><h4>Info:</h4><ul><li>Added custom support to the horizontal printing rod</li><li>Added optional longer axle for more distance between propellers (10mm instead of 5mm).  With stronger wind the bigger blades should not collide.</li></ul>The Pitch from the Basic Blades:<ul><li>Big - Pitch 195mm</li><li>Med - Pitch 170mm</li><li>Small - Pitch 135mm</li></ul>Additional Propeller Blades with different numbers of Wings:<ul><li>Big - Pitch 190mm</li><li>Med - Pitch 160mm</li><li>Small - Pitch 130mm</li></ul>Additional “Slower” Propeller Blades:<ul><li>Big - Pitch 400mm</li><li>Med - Pitch 325mm</li><li>Small - Pitch 250mm</li></ul>Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Info II:My other windmills are fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul>Info III:More modifications you find on my Patreon account.<figure class="image"><a href="https://www.patreon.com/posts/mod-608-bearing-105175595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000235261/design/2024-05-30_3ad9786c3df1b.png"></a></figure>&nbsp;<figure class="image"><a href="https://www.patreon.com/posts/mod-pole-adapter-103628897" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000235261/design/2024-05-30_70c92ad1f54a9.png"></a></figure>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Toroidal Windmill - Customizable system

Around The House

Habitaritus

I have two cute Easter bunnies for round sweets for you here. You can put them in an Easter nest, hang them on a present or just give them as a gift. The recipient is sure to be delighted with this little gift.&nbsp;Have fun with these sweet temptations. Don't forget to rate them. Please also have a look at my other models.

Easter bunny for round sweets as gift tags

Gifts

3DPrintable.art

<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>Adorable articulated teddy bear, perfect for a toy, a gift or a decorative item. This bear can stand up and sit down, and its arms and head can move. &nbsp;Works well in single or multi-color prints. Be creative and share your results!&nbsp;Don't be scared but printing this model will require supports:<figure class="table" style="width:95.8%;"><table class="ck-table-resized" style="border:0px solid hsl(0, 0%, 100%);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2023-12-30_3820f9457a368.jpg"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">An example of a finished print with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:70.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border-style:solid;border-width:0px;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously. &nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border-style:solid;border-width:0px;"><figure class="image image_resized" style="width:80.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-02_0dbb0bcdbe4e8.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid hsl(0, 0%, 100%);"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:80.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_1ecd40b55155e.png"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Articulated Teddy Bear (print-in-place)

Articulated

GiskardReventlov

Only print the “print-in-place” version in PLA and if you are certain of your printer and filament tolerances and that your filament is well dried. Otherwise, print the parts separately using printing supports on the shelf support part (Support_ONLY.stl).--------------------------------------Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model.&nbsp;Update 2: I now recommend printing the “Shelf_ONLY” and “Support_ONLY” files separately using supports on the “Support_ONLY” file. Many people reported not being able to separate the parts on the print-in-place version.--------------------------------------A print-in-place shelf for the top of computer monitors and TVs.<ul><li>The support arm is adjustable and has a single contact point with the monitor, so it fits firmly and easily also curved-back monitors.</li><li>Perforated to not block monitor cooling.</li></ul>Instructions to separate the parts after printing (only takes 10 seconds):<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sEQsrMtvIG0"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sEQsrMtvIG0"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sEQsrMtvIG0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>No supports needed for printing, just slice and print in the orientation that the files comes in.<ul><li>Print in PLA! If you want to print in PETG, print the parts separated and use supports, don't use the the “print-in-place” file, it will not separate!</li></ul>It's strong! Don't worry about putting heavy stuff on it - but I wouldn't put any liquid…<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724759/2023-12-10_hyy4fbaqax0k.jpg"></figure>STEP file included. Feel free to remix and share, but please use the attribution feature.

Adjustable Monitor shelf - Fits any display

Office

Geek3Designs

This model is based on my other CAT lightbox design. I had a user ask for the 2 logos to be independant lightboxes. I have redesiged them so you have the option of one or the other or both if you would like. All of these lights feature a sawtooth cutout on the rear cover for easily haninging on a well. They also have a 15mm x 10mm cutout to allow for easy wiring of lights.