SadKingBilly

3DPrintBunny

Bamboo Vase

DonMatis

Experimental attempt to combine gothic architectural elements with filamenting painting.&nbsp;This is one of my most complex models and will take time to print, hope you like it :)&nbsp;Due to complexity, makerworld can't slice my printing profile with a timeout error. You can download the provided 3mf file from here to print it&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA BambuLab Basic Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #8 (0.72mm) swap to Charcoal Black</li><li>At layer #10 (0.88mm) swap to Cement Gray</li><li>At layer #13 (1.12mm) swap to Sunlu Gray</li><li>At layer #16 (1.36mm) swap to Bambu Lab Gray</li><li>At layer #20 (1.68mm) swap to Light Gray</li><li>At layer #24 (2mm) swap to Bone White</li><li>At layer #30 (2.48mm) swap to White for the rest.</li></ul>&nbsp;<blockquote>Enjoy my work? Support me by joining my club on <a target="_blank" href="https://www.printables.com/@DonMatis" rel="nofollow noopener">printables</a>. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>

Hourglass

HueForge

Whopper Printing

<a target="_blank" href="https://www.etsy.com/listing/1509591113" rel="nofollow noopener">Get the V-Twin here</a>!&nbsp;Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights).This entire print is around 180g of filament, but it's been designed to share parts with my other engines I'm working on as well as the brand new <a target="_blank" href="https://www.etsy.com/listing/1509591113" rel="nofollow noopener">V-Twin engine</a>! This means you only have to print a couple different parts to build whole new engines! Other models coming soon.Join <a target="_blank" href="https://www.patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a> to get every new paid model released for free (only Advanced and Commercial Tiers), including new engines I release!Please post your makes, I love seeing them!&nbsp;If you would like to support me, consider these options:&nbsp;Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>&nbsp;

Single Piston Engine - Fully Printed Buildable Kit (With Printed Screwdriver!)

Misc

Romwba3D

A Spooky set of Candles split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Halloween Spooky Candles

Models & Props

Filar3D

Is your desktopalways a mess and full of cables everywhere? We created this little cable holder hive. 3 sizes for different cables&nbsp;Small size is 120mm tall Medium size is 140mm tall Large size is 180mm tall&nbsp;I believe medium size is the best choice.<h3>Print instructions</h3>Since this is a very simple design, these settings are more than enough:Infill: 0.4 Layer height: 0.3 Support : NO Bottom solid layers: 3

Cable management Hive

Containers

BlueBeka

A quadruple deck box; available in various sizes. Let me know if you need a different size and I can add it.&nbsp;The number refers to the number of double sleeved cards that will fit. If you want the single sleeve count, multiply that number by 1.25. (The 80+ will fit a single sleeved commander deck).<h4>Print Settings</h4>The model is designed to be printed with 0.4mm nozzle, 0.2mm layer height and no supports. I recommend to printing with 2-3 walls and 15%+ infill for good strength. It's also best to use a brim to help the lid adhere to the bed. The arms should probably be printed with even more walls (5+) and infill (50%+) for better longevity.

MTG Linkage Lid Deck Box - Quadruple (print in place)

Gaming

DP design

Fully parameterized tool caddy. OpenSCAD requires the BOSL2 library.&nbsp;I discovered by accident that the utensil drying rack that I designed also works well for keeping tools handy on the workbench. <a target="_blank" href="https://makerworld.com/en/models/38242" rel="nofollow noopener">https://makerworld.com/en/models/38242</a>&nbsp;Compared to the utensil dryer, the tool caddy doesn't need to be as tall, and you can print faster and thinner if you omit the side hexagon perforations. The customizer allows changing number of bins and omission of bottom slots, as well as important dimensions.If you do print the hexagon perforations, you will need some combination of these changes to get a good quality print<ul><li>Thick walls, 2.5 mm or more</li><li>Large hex space, 3 mm or more</li><li>Reduce printer acceleration if you are printing on a fast machine</li></ul>Please be generous with your Likes and share your Makes!

Workbench tool caddy, OpenSCAD parametric

OpenSCAD

Alex.M

My daughter wanted to wear <a target="_blank" href="https://makerworld.com/en/u/2571622071" rel="nofollow noopener">DorAndy</a>&#39;s the flexetki toy as a bracelet, so I combined it with <a target="_blank" href="https://www.printables.com/@Mistertech" rel="nofollow noopener">Mistertech</a>&#39;s Strap buckle (the only buckle I could find that prints flat) into a sort of bracelet.&nbsp;There is a new/different model (printed on the side this time) here: <a target="_blank" href="https://makerworld.com/en/models/235372" rel="nofollow noopener">https://makerworld.com/en/models/235372</a>&nbsp;

Flexi bracelet (fun bracelet for kids)

Toys

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

Art