Sacrasang3D

Can print in vase/spiralize mode with probably any nozzle size. I printed mine with a 0.6mm nozzle in Eryone dual extrusion silk PLA. Scale as you please.&nbsp;There is a single layer version, two layer version 1 is a straight stack and slightly taller than the two layer version 2 where the second layer is rotated slightly (photographed print). If intended for use as a pot I do not recommend vase/spiralize mode. Instead use multiple walls, 0% infill and 0 top layers. For a drainage hole a negative modifier in your slicer is all you need :)

Cool S Vases

Cool S

Model supports multicolor printing on single material FDM printers by changing filament at specific layers for design effects. I printed the examples in the photos by manually pausing and changing filaments, M600 gcode operations should be effective too.&nbsp;Scaling up to fit adults will not be an issue, scaling down much further than default size could risk issues with fine details.&nbsp;Designed for printing at 0.2mm layer heights, accommodates 0.3mm first layer ok too.&nbsp;Otherwise use well tuned settings for TPU printing, some of the details/outlines are thin and require well tuned flow rates, retractions, etc.

Cool S

TPU Wristbands