SBGForgeLab

BrandedAbstract3D

<h3><strong>Model</strong></h3><p>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.</p><p>&nbsp;</p><p><strong><u>To complete the phone holder you'll need:</u></strong></p><ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3><p>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.</p><p>&nbsp;</p><ul><li><strong>Caliper:</strong> Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li><strong>Brake Disc:</strong> Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li><strong>Display Screws:</strong> Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li><strong>Brembo Vanity Plate: </strong>There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul><p>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.</p><p>&nbsp;</p><p>Happy Printing!</p>

Brembo Drinks Coaster Set

car culture 

3D_Prints

<p>What better way to spread the light then 3-D printed lithophanes. This is was made entirely by me on Onshape, nobody has permission to remix, distribute, sell ect. for this model. The model can be printed in what ever kind of filament you want but white is <u>Recommended. </u>This model is for <strong><u>5x7 Lithophanes ONLY. </u></strong> </p><p>Any other size will not work. For making lithophanes look at the website titled LithophaneMaker.com </p><p>The model comes apart into two pieces for changing lights, or batteries,</p><p><strong><u>Please refer to this video for instructions on assembly, changing batteries, or changing lights. </u></strong></p><figure class="media"><div data-oembed-url="https://youtube.com/shorts/SaUOrlNyCYc?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=SaUOrlNyCYc">                        <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;">                          <iframe src="https://www.youtube.com/embed/SaUOrlNyCYc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe>                        </div>                      </div></div></figure><p>&nbsp;</p><figure class="media"><div data-oembed-url="https://youtube.com/shorts/XbjwBuQNFrQ?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=XbjwBuQNFrQ">                        <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;">                          <iframe src="https://www.youtube.com/embed/XbjwBuQNFrQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe>                        </div>                      </div></div></figure><p>LED Puck Lights with Remote Control, Battery Operated Wireless Closet Lights, Under Cabinet Lights Stick on Tap Light Push Lights, Color Changing Under Counter Lights for Kitchen, 2 Pack - White- These are the exact lights used in the video, look this up in the Amazon search bar to find.</p><p>&nbsp;</p>

Lithophane Picture Frame 5x7 

Photo

AerodynamicSpud

<p>A fun cat toy I made when I got bored, it is a ball inside of a bigger ball to ensure maximum cat interest.</p><p>(Cat not included)</p><ul><li>Normal supports on the bottom to help with the base</li><li>Break off ball once printed</li></ul>

Ball in Ball Cat Toy

cat toys

Kinetik

<p>I upgraded my S9 with the S10 laser head and linear rails and coulnd't find any working holder, so I designed them by my own. I used the red RepRap endstops see in the last picture.</p><p>For the Y-endstop I made a bracket holder in 2 versions, either using a M5 nut or one of the spare rail-nuts from the laser itself. </p><p>You need aditionally 2x M3x10 or M3x8 screws to mount them.</p>

Sculpfun Laser S9 to S10 linear rail endstop housing

Lazer

DelFabDesigns

<ul><li>Sleep Token Sigil Lightbox</li><li>PLA Filament used</li><li>Colors: Black & White</li></ul>

Sleep Token Lightbox

Bands

GAB-3D

<p>This is the V2 version of the first Pug Wheels.<br/> Now mostly 3d printed.</p><p>The only things not printed are:</p><ul><li>the wheels that I bought at a local store </li><li>the wheels axis that I cut from a 10mm aluminum tube</li><li><p>The seat that has been cut from a fabric bag<br/>Parts are assembled with superglue and zip ties (optional)</p><p>The result is a super light wheels set that my pug enjoyed a lot.</p></li></ul><h3>Print instructions</h3><h3>Category: Pets Print Settings</h3><p><strong>Printer Brand:</strong> Prusa</p><p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo" rel="nofollow">i3 MK3</a></p><p><strong>Rafts:</strong> No</p><p><strong>Supports:</strong> No</p><p><strong>Resolution:</strong> .2</p><p><strong>Infill:</strong> 10%</p><h3> How I Designed This</h3>

Pug Wheels - Dog Wheelchairs - Version 2

3D printing to save  lives

luisMol

<p>From now on I use the upper drawer of my IKEA Malm as an poop container for the BambuLab printer<br> </p><p>The second model is to make the hole in the right position. I used the small hex key that was delivered with the BambuLab, stuck it in the hole of the guide to find the middle of the poopchute.<br>hole size: 62mm</p>

car culture

Photo

cat toys

Lazer

Bands

3D printing to save lives

3D printing accessories