S3VEN.

dalet11

This is a fully calibrated profile for Elegoo PLA+ Black.This is a cheap and great filament I really like and print a lot, costs around 13-15$ per 1kg on Amazon most times.<h3>Calibrations done:</h3><ul><li>Temp tower</li><li>Flow rate</li><li>Pressure advance</li><li>Volumetric flow for optimal printing speeds.</li></ul>&nbsp;With this profile & filament prints are beautiful and consistent.&nbsp;This is made with X1C, and should work the same on P1 series.&nbsp;Download RAW file - can't upload a profile with custom filament profile :)&nbsp;

Elegoo PLA+ Calibrated profile

print profile 

bounetphoto

This box will store 12 crayons safely.The lid clips on the box easily but safely.The lid is a slightly hard to put on the first few times because of the layers but as soon as they wear just a bit it becomes easier.Here is a great companion for it: <a href="https://www.thingiverse.com/thing:2917723" rel="nofollow">https://www.thingiverse.com/thing:2917723</a><h3>Print Settings</h3>Printer Brand:PrusaPrinter: <div>Prusa Mk2</div>Rafts:NoSupports: <div>No</div>Resolution:0.200Infill: <div>10</div>Category: Toy & Game Accessories

Travel Crayola box with clip on lid

travel

I3ddruckmarc

This is the Bambu Lab lithophane frame. I cut off the top and added connectors (in Bambu Studio) for a easier print with less support. I also removed the Bambu Lab lettering to lay the top flat on the build plate.Use some glue and put the pieces together.

Bambu Lab lithophane frame - less support

cmyk litho

JamesThePrinter

Set of trees and trunks that work interchangeably. The pieces thread together. The set includes 3 trunks and 5 trees:Trunks<ul><li>Short Trunk</li><li>Tall Trunk</li><li>Tall Trunk - Textured</li></ul>Trees<ul><li>Spiral Tree</li><li>Lattice Tree</li><li>Scalloped Tree</li><li>Wavy Tree</li><li>Diamond Tree</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>Trunks need no special settings. While the trees do not require any special settings, I recommend the following:Spiral Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>Manually move seams to the back side of each spiral. This will reduce curling of the leading edge.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/5faa24f8-ced8-45b5-83ef-2f7ad102d1ec/spiral.png#%7B%22uuid%22%3A%22cf03bb2c-3622-43a3-87f6-ed5c101cf626%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Lattice Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li></ul>Scalloped Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>Wavy Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li><li>Use the Classic perimeter generator - Arachne leaves some unwanted edges</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/1d56fb74-827a-44e7-ac40-975484e4d77c/wavy.png#%7B%22uuid%22%3A%2228f92ead-6d9a-44c4-aaa3-8459b69435ff%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Diamond Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Spiral Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Simply Green PLA</li></ul>Lattice Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Bambu Lab Matte Dark Green PLA</li></ul>Scalloped Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Opal Green PLA</li></ul>Wavy Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Inland Lutz Green PLA</li></ul>Diamond Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Mystic Green PLA</li></ul>

Christmas Tree Set

Xmas 

Tridense

<h4>This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! <a href="https://www.buymeacoffee.com/Tridense" rel="nofollow">https://www.buymeacoffee.com/Tridense</a> </h4>Clip it on to your doors sidepocket or onto the pocket on the back of your seat!Volume of 2 liters (67.5fl.oz.)Insert a small plastic bag to easily empty the canPrint the flipper lid 100% infill, important for balancing the pivotAll the parts are pre-oriented for printability, I used tree supports on all the parts and kept the treshold angle at 29 degrees.<figure class="image image_resized" style="width:50%;"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/66866/2023-09-22_kt765tldam9a.jpg"></figure><figure class="image image_resized" style="width:50%;"></figure>&nbsp;<h4>Changelog:</h4>2023.09.12: Added a little curve on the hook to make it a little bit more secure (Bin v2)

Car Trash Can

organizing 

Eric Cardinal

Drywall anchor, easy to print

Drywall Anchor

Work

TrendtB

A large, stylish desk or shelf ornament filled with good vibes only. I designed this sign in Figma and Fusion360 to learn multi-color workflows, and bring good vibes to my workspace.&nbsp;The finished print can stand on its own and looks fantastic as a multi-color print.&nbsp;The version shown in the photo used:<ul><li>Bambu PLA Basic Red</li><li>Polymaker PolyLite PLA Yellow</li><li>Bambu PLA Basic Blue</li><li>Bambua PLA Matte White</li></ul>&nbsp;For personal use only. Not for commercial use.

Good vibes only - large standing sign

signs 

Nico

<h3>iPhone 13 pro case</h3><h4>Support the designer:</h4><ul><li>Donate Bitcoin here: bc1q9mhh7l53mmlnqqmazdnr6gele0smrzkunclfvj</li><li>Donate Ethereum here: 0x36CA6EEF3700ff18858f195706C5E3A9d6458241</li></ul>&nbsp;I went through a few iterations to make this case perfect. There's a few features that make it really good:<ul><li>Buttons are all have a good click to them. No inconvenient holes, all buttons are covered, including the action button.</li><li>The case has a tight grip on the phone, doesn't slide out easily.</li><li>Camera bump guard is split from the case, so you can print it in different materials like PLA or TPU and different colors.</li><li>Beautiful honeycomb pattern that makes for a nicer finish</li><li>relatively easy to print without bulging or other critical problems</li></ul><h3>Assembly:</h3><ul><li>insert the camera bump guard first in the right direction</li><li>Insert all 3 buttons</li><li>finally insert your phone!</li></ul><h3>How to print:</h3><ul><li>TPU 95: a strong flexible filament is required for the case</li><li>Camera bump guard can be print in TPU or PLA.</li><li>Use supports on tight overhangs on the case like the buttons and speaker and port bridges.</li><li>I recommend 15% infill, for better clickiness of buttons.</li><li>If you want the cool effect to highlight the honeycomb pattern in a different colour, you'll need to add a stop at layer 2 and 3. This means you'll start with TPU, change to the other colour at layer 2 and revert to TPU at layer 3.</li><li>Print 3 volume rocker buttons and 1 power button</li></ul><h3>Update log:</h3><ul><li>2023-11-23: first version uploaded</li></ul>

iPhone 13 pro case honeycomb

random to make 

miak3D

This is a filament painting of an astronaut floating through space. It was made by using Midjourney. Printed at 240x114 @ 1.92mm&nbsp;I have also added a thicker version for those that want a sturdier print. 240x114 @ 3.12mm&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The blue astronaut is the thinner version, the orange astronaut is the thicker option.&nbsp;Filaments Used: PrintBed Black Overture Orange Polymaker Teal PrintBed White&nbsp;Swap Instructions: Black until layer #7 at 0.64mm Aqua Blue until layer #14 at 1.2mm Orange until layer #18 at 1.52mm White for the rest.

Astronaut Floating in Space - HueForge

hueforge

Whopper Printing

This design prints with NO support material and requires NO assembly. Print with the cab side DOWN. This is a great model to test your overhangs and tolerances. The tolerances are 0.3 mm.Be sure to download <a target="_blank" href="https://makerworld.com/en/models/13070?profileId=13070" rel="nofollow noopener">the excavator</a> that goes with it!&nbsp;If you would like to support me, consider these options:&nbsp;Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Print-In-Place Dump Truck

Ronan Stuff

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

metalheadprinting

Honda Keychain

for others

R C 3D

PRINT PROFILES:These are the print profiles that I've tested and can confirm to work well. Any profiles not listed below are not tested by me, and I cannot confirm whether or not they will work well. I recommend the Spool Adapter - w Slots. This one has the latest features and works the best of the three in my opinion.<ul><li>Spool Adapter - 200mm (Use at your own risk. This was requested, but I'm not 100% sure how well it will perform over time. Once I've had some time with it I will update this.)</li><li>Spool Adapter - w Slots</li></ul>&nbsp;SUMMARY:This spool adapter was designed to hold the cardboard spools and provide several features that assist in the ease of operation when using cardboard spools in the AMS. Here are the issues it's designed to address:<ol><li>When the walls of a cardboard spool become bent or deformed, they don't ride in the guides properly and end up causing issues in the AMS. This provides solid, sturdy walls that don't bend or deform.</li><li>The lip of the spool adapter is designed to provide a large enough surface contact against the rollers that it maintains traction. This isn't meant to snap onto the edge of the spool, but rather act as its' own spool end. The cardboard may be smaller in diameter, and this should still work great.</li><li>If you have issues due to spool weight, this has a core with a lid that can be used for desiccant or weights of some sort.</li><li>Recently I've discovered that this also works on some plastic spools such as esun which often have feed issues in the AMS. Based on feedback, this completely solved the issue for several people.</li></ol>To use the spool, simply drop your spool onto the spindle half. Screw the nut half onto the spindle and ensure your width will work in the AMS guides. Finally, screw on the locking nut to secure the end in place. To use desiccant or weights, simply drop them into the reservoir and screw on the cap.&nbsp;This has been confirmed to work with Overture, Polymaker, Elegoo, and a few other brands I'm not familiar with. With overture, you may have to crank down on the nut half to get the width right. For storing, I simply place the end in the cardboard hole and the sides hold it in place.&nbsp;CHANGELOG:&nbsp;UPDATE (10/25/23):I've added a second print profile. It will have “Thin” in the description notes or whatever. I'm adding this because some people are having issues with the width when using overture spools. I've seen several that were successfully installed, but for those that are having trouble, this one should be just a touch more narrow and may be what you're looking for.&nbsp;UPDATE (11/3/23):I'm adding another print profile for a spool with a smaller overall diameter. I've reduced it by a little over 1mm, which based on the feedback I've gotten, should solve the issue of the spool being too large overall for the new AMS version. If you have this issue with the other spools, give this a shot and let me know what you think.&nbsp;UPDATE (12/15/23):I added (2) new print profiles with an updated version of the spool adapter. I'm going to leave the other profiles up for now, but once I'm happy with the updates I'll be removing the other print profiles. The files will still be available in the raw files section, but I prefer having fewer print profiles.&nbsp;The spools was updated with little overhangs around the rim of the spool. I had a few spools where the cardboard would swell or deform, pulling away from the plastic sidewall. I added these little overhangs to help hold onto the sidewall and prevent it from pulling away. When it pulls away from the plastic, it creates rubs the side of the AMS guides and causes additional friction or snags the spool altogether. When I installed Polymaker into these, the overhangs just barely fit over the edges and held it in pretty well. If the spool has thick sidewalls, you'll have to push down on the sidewalls where the overhangs are at. I used a flathead screwdriver to shove the cardboard under the overhang.&nbsp;I also added some text, a Bambu logo, and RC3D. The colored version actually doesn't take much longer than the uncolored version, so don't be afraid to run that AMS now that cardboard is no longer an issue.&nbsp;UPDATE (1/9/23):Removed the Bambu reference and logo. Removed the small finger that were meant to hold the cardboard in place. Based on feedback, those weren't as well received, so I did away with them. If you'd like the model with the little nubby things, let me know.