Bastico448

Zonique2k

Show off your filament colors in style!&nbsp;Note: This model is tiny, only around 3 cm and needs just 3 grams of filament. So, there&#39;s no excuse not to print one for each new filament you get.&nbsp;Short guide on how to modify the text in Bambu Studio:<ol><li>Select the right plate/model based on the amount of information you need on the model (Type, brand, no color/1 line color/2 line color). <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504313/design/2024-06-20_05fe8092ada84.png"></li><li>Switch the process from Global to Objects. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504313/design/2024-06-20_f7c1265f2358e.png"></li><li>From the object tree, select the text you want to change and click &#34;Text shape&#34; in the toolbar. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504313/design/2024-06-20_b0b7c10902041.png"></li><li>Enter the new text (looks best with capital letters) and click &#34;Text shape&#34; again to dismiss it. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000504313/design/2024-06-20_11d71068bd176.png"></li><li>Repeat steps 3 and 4 for other text elements, if needed.</li><li>Slice, print, and enjoy! (o; </li></ol>

Crystal Cluster Material Sample

tests and calibration

fay3dlab

So my nephew is a big fan of the jurassic world franchise and so i thought i make him and his friends something they could do together.. Since my catapult and bicycle kit card was a great success with kids.. i thought i make something new for him.. I got the inspiration as i saw <a target="_blank" href="https://makerworld.com/en/@agepbiz" rel="nofollow noopener">agepbiz</a>&#39;s jeep model and i just had to make my own version..   <figure class="image image_resized" style="width: 27.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447652/design/2024-04-29_813c42ea68024.png"></figure>This is my nephew Eqy with his newly painted t-rex i airbrushed for him   So the jeep kit card was modelled fully using tinkercad.. it should be printed without supports..  the jeep body has 4 support blocks that holds part of the tyre body.. you can peel it off using a blade..  <figure class="image image_resized" style="width: 64.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447652/design/2024-04-29_e680b5f32ba61.jpg"></figure>&nbsp;I&#39;m also currently printing using 0.2mm nozzle so i can compete the 0.2mm nozzle contest.. I&#39;ve already test printed it using single color..  just need to print it in multicolor now.. and i&#39;ll share the profile later..  <figure class="image image_resized" style="width: 71.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447652/design/2024-04-29_f6529b5bbbeab.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447652/design/2024-05-15_207af85bbc7fe.png"></figure> The assembly is quite straight forword.. but i also made a short video on how i assemble it..<figure class="media"></figure> As always i also prepped the 3mf files for multicolor prints..   P/S: thank you everyone who downloads my models and those who donated their precious boost token.. Every little thing helps me and I hope you&#39;ll have fun 3d printing my kit card model i make..&nbsp;<figure class="table" style="height: 162.344px; width: 960px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">By joining me as a supporter.. you&#39;ll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">And if you&#39;re looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Jurassic Park JP18 Jeep

TAO-FPV

INSTA360go2相机保护，有带减震的和不带减震的，快速装相机，防止误触录像开关

insta360 go2 相机保护，减震

VroDoPrints

IF YOU LIKE THIS MODEL GIVE ME A “THUMBS-UP” SO MORE PEOPLE CAN DISCOVER THIS MODEL. THANKS There are some other Fan Grills out there in the Makerworld but all of them were poping of during the print because of not holding properly.I created my own one with a thicker lip (as you can see in the Picture) wich makes the grill really snap in place and hold it there. If it not fits right away, scale the model up to 101%. It seems like there are slightly tolerances in toolhead covers. IMPORTANT !!! IF YOU JUST DOWNLOAD THE MODEL INSTEAD OF THE PROJEKT STAY WITH A 0,2 LAYER THICKNESS!!!FINER OR COASER LAYERS CAUSE THE LIP TO DISSAPEAR DURING SLICING!! I added a profile with a more fine honeycomb and variable infill grid pattern look. IMPORTANT FOR STL DOWNLOAD FINE HONEYCOMB FAN GRILL !! -KEEP 0.2 LAYER -NO TOP AND BOTTOM LAYER -20% INFILL HONEYCOMB (or other infill pattern for different look) -3 WALLS Fitting Auxiliary Fan Grill here ( <a target="_blank" href="https://makerworld.com/de/models/119453#profileId-128488" rel="nofollow noopener">https://makerworld.com/de/models/119453#profileId-128488</a> )

Toolhead Fan Grill / Cover for P1S/P1P/X1C

P1S Addons

Laura12

A simple and funny minimalist fallout themed clock where the clock&#39;s hands are… well, Vault Boy&#39;s arms.It can be hung or left standing with the support included in the print plate. In the raw files there is a .f3d file if you want to edit it in any way or adapt it for other clock mechanisms&nbsp;<figure class="image image_resized" style="width: 41.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498084/design/2024-06-16_873a363b89acb8.gif"></figure>It looks really good printed with glow in the dark filament!

[Clock component kit-011] Fallout Clock

Presents for Nerds

viu.logic

用于没有AMS的情况下使用原有A1四合一进料接头同时连接四种耗材。全链路封闭保证耗材的干燥。更好的耗材管整理。按下装置中的滑块即可锁紧耗材，同时推动就可以加载或是退出耗材。同时上传了用于6mm外径螺纹气动接头的转接件。Use to connect four filaments with the original A1 four-in-one feed connector. The fully enclosed supply chain ensures the dryness of the filaments. Help to organize the filament tube. Press the slider in the device to lock the filament, then push to the right to load or push to the left to unload filaments. Additionally, an adapter model has been uploaded for PC4-M6 connector use.

手动换料装置 Manual Filament Switcher

Tools

Officina23

I present to you my interpretation of the recirculating air filter. The principle is always the same, a Hepa filter to block the smallest particles (VOCs) and activated carbon to absorb smells/fumes generated by certain materials such as ABS, ASA, PC, PA, etc. (usually those that require to be printed with Enclosure).I used the classic &#34;Bento Box&#34; for a few months, a filter that was the source of my inspiration. This is a complete redesign, not a simply remix: I designed it completely from scratch. It&#39;s wider, it&#39;s taller, it&#39;s more efficient and in my opinion it&#39;s also better looking.&nbsp;Filaments used to print my scrubber: Bambu Lab PETG-CF Black (31100) Bambu Lab PETG-CF Malachite Green (31500) Bambu Lab PETG-CF Brick Red (31200)For templates and covers I used common PLA.&nbsp;<figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><thead><tr><th>What do you need</th><th> </th></tr></thead><tbody><tr><td>In addition to your printer, you need something else to complete the model. These are cheap components, on sale almost everywhere: 2x 4028 fans (or 4020, to be mounted with the spacer found in the optional plate of my print profile); 4x threaded inserts that must be locked into the fan duct; 4x screws M3 x6, x8 or x10 to join the fan case with the fan duct;  If you don&#39;t want (or can&#39;t) use threaded inserts, you can join these two parts by gluing them together. 24x magnets 5x3 mm to join all the other parts; 1x Hepa filter 80x40x15mm to place in the upper container; at least 50g of activated carbon, acid-free type recommended, to place in the middle container. To avoid any surprises, I purchased the one sold as a refill for the Bento Box.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-02-25_b96543d7f3d1b.jpg"></figure></td></tr></tbody></table></figure><figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><thead><tr><th>Assembly guide and notes</th><th style="width:320px;"> </th></tr></thead><tbody><tr><td>Fan Duct&nbsp;1. Glue the logo on the side following the slots; you can use the template found in the &#34;optionals&#34; plate, but it is not essential.2. Insert the threaded inserts into the holes in the fan duct; the temperature of the inserts must be sufficient to make them penetrate the material, but not too high to avoid deformations; 3. Place the fan enclosure over the fan duct and join them with the four M3 screws;If you don&#39;t want to use threaded inserts, you can glue the fan duct to the fan case using the 4 pins that are in plate 5 to align the two parts perfectly. This will not affect the ability to mount and dismount the fans.&nbsp;Notes: from February 28th in the print profile you will find the fan duct with three air deflectors. If you want to print the version without baffles you see in the photo on the right, you will have to download it separately.</td><td style="width:320px;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-02-25_0eb1b3a8c2a22.jpg"></figure></td></tr><tr><td>Fan Case&nbsp;1. Insert the two 4028 fans and pass the cables and connectors through the appropriate hole until they reach the bottom of the fan duct. If you use two 4020 fans, insert above the fans the spacer that is in the optional plate of the print profile;2. Insert the green fan Conveyor, which will keep fans locked in place. If the Conveyor goes in too easily and is easy to pull out, lock it with a couple of drops of CA glue;4. Insert four 5x3 magnets into the appropriate holes on the top of the Fan Case, making sure the polarity is in the same direction for all magnets.5. When you have finished all the wiring you need, place this block inside the printer in the bottom right corner; secure it with double-sided tape or screw it into the hole already present inside the printer.</td><td style="width:320px;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-02-25_86de061383266.jpg"></figure></td></tr><tr><td>Activated Carbon Case&nbsp;You should use “pellet” activated carbon so as not to disperse its dust, and acid-free type to avoid corrosion of the metal parts over time. If you use “flakes” activated carbon, after placing it in the baskets let the powder fall before placing them in their container.&nbsp;1. Insert four 5x3 magnets into the appropriate holes on the top of the Carbon Case and other four magnets on the opposite side. Before inserting the bottom magnets, pay attention to the polarity; when you overlap the stages the magnets should attract each other, not repel each other.2. Put some pellets in the red basket (the one with the two handles); Fill it halfway, so as not to obstruct the passage of air. Place the green basket on top of the red one and put the activated carbon. Repeat until you have stacked all the baskets.3. Finally insert the stacket baskets into the Carbon Case, always holding it vertically.&nbsp;Notes: the 3D preview of plates 3 and 4 show the lower grids of the baskets as a solid. Grid will be generated directly from the slicer, where I have set zero upper and lower layers and an infill between 30 and 40% depending on the position of the basket.</td><td style="width:320px;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-03-30_0b35052a01f44.jpg"></figure>&nbsp;</td></tr><tr><td>Hepa Filter Case and air intake&nbsp;1. Insert four 5x3 magnets into the appropriate holes on the top of the Hepa Case and other four magnets on the opposite side. Last four magnets must be inserted on the bottom of the Air Intake black frame. Before inserting any bottom magnets, pay attention to the polarity; when you overlap the stages the magnets should attract each other, not repel each other.2. Insert the green filter holder into the black container, then place the filter. The expected measurements of the filter are the most common: 80x40x15 millimetres. If you need to use a filter of different sizes write me a message and I will prepare the adapters.3. Insert the green air intake into its black container, and place it on top of the filter container.&nbsp;Note (1): why did I make the upper part in two small containers (Hepa case and air intake) instead of joining the black container in one piece? Because to replace the filter you just need to detach only the air intake, and also to be able to make any developments/variants of this piece without having to reprint too many objects.Note (2): in the print profile you will find the raised version of air intake: this for capturing the air as close as possible to the print plate. Mount this part with the lower half facing the back of the scrubber, so you can slide it under the printer black frame. If you prefer a lower version, please download the two .stp files &#34;Air Intake (short)&#34; and “Air Intake Conveyor (short)” from raw model files.</td><td style="width:320px;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-03-31_c60b49387f23c.jpg"></figure></td></tr><tr><td>Optionals&nbsp;Carbon and Hepa words are optionals.If you want to use them, print the &#34;optional&#34; plate in the print profile. You will have all the letters you need and the templates to glue them in perfect position on the frames.To glue them, first position the template and then introduce the letters where you will have already applied a very small amount of CA glue. Wait for the glue to dry and then gently remove the template. Covers are another optionals. There is a print profile with three types of covers to prevent filament debris from entering to the filter case when the fans are turned off: - a cover with magnetic fastening (requires four 5x3 magnets) to close the Carbon Case or the Fan Case when others upper cases are not in place;- a cover with interlocking fastening to close the air inlet on the first low version of hepa case;- a cover with interlocking fastening to close the air inlet on the actual raised version of hepa case; this cover also partially covers the black printer frame, but does not interfere with the movements of the print head.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-03-07_d067fb69e2899.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-03-31_5912dc7408aa7.jpg"></figure></td></tr><tr><td>Wiring  Feel free to wire the scrubber as you prefer, but if it helps you, I designed the fan duct to hide the cables as much as possible: under the chute there is a space to hide the fan connectors, and on the back wall there there are two diagonal holes for the power cable to come out. I left the power cable long enough to be able to disconnect it without problems, and it remains hidden between the scrubber and the right wall of the printer. I passed it through one of the holes in the frame, and since I use a 12V external power supply for the fans, the cable comes out from the bottom of the printer passing through one of the holes already present in correspondence with the original cable glands. To do this I had to remove both the side and rear panels, but it was a good opportunity to do some cleaning ;-)&nbsp;Since the two 4028 fans I used are very powerful but also noisy, I used an inexpensive dimmer to adjust the speed of the fans. I normally run them at 25% with PETG, 50% with PAHT and 75% with ASA and ABS.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-03-05_3c901b36f74ca.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-03-05_0f404936b9eb5.jpg"></figure><figure class="image image_resized" style="width:50.54%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000203175/design/2024-04-17_0af2125c89b72.png"></figure></td></tr></tbody></table></figure>&nbsp;

Air scrubber / purifying filter

long prints

Eleazar 3DinPlastic

A very simple Overhang Test&nbsp;You can print it with the 2 printing profiles, use the one you prefer.&nbsp;NORMAL profile: automatic cooling activated, speed reduced to 10-20mm/s FAST profile: automatic cooling deactivated, speed 150-250mm/s&nbsp;Or you can choose in the app the option to use your own filament parameters, and your own cooling settings will be applied.&nbsp;Happy printing!&nbsp;

Overhang Test - Bambulab P1 X1 and Other Printers 

Initial Towers usw

AU3D

This is a holder will fit any (super glue) bottle with an elliptical shape and dimensions of roughly 36x26mm. Make sure your bottle has the appropriate size. It features 3 slots. I highly recommend pairing this accessory with my <a target="_blank" href="https://makerworld.com/en/models/505811" rel="nofollow noopener">Double Lock Plug</a> to enhance its stability on the board and prevent it from unhooking.<h3>Other Glue Holder</h3><ul><li>Round 31mm: <a target="_blank" href="https://makerworld.com/en/models/462713" rel="nofollow noopener">1 Slot</a> | <a target="_blank" href="https://makerworld.com/en/models/466613" rel="nofollow noopener">2 Slots</a> | <a target="_blank" href="https://makerworld.com/en/models/468544" rel="nofollow noopener">3 Slots</a> | <a target="_blank" href="https://makerworld.com/en/models/31006" rel="nofollow noopener">6 Slots</a></li><li>Round 38mm: <a target="_blank" href="https://makerworld.com/en/models/473523" rel="nofollow noopener">1 Slot</a> </li><li>Elliptical 36x26mm: <a target="_blank" href="https://makerworld.com/en/models/462846" rel="nofollow noopener">1 Slot</a> | <a target="_blank" href="https://makerworld.com/en/models/473540" rel="nofollow noopener">2 Slots</a> | <a target="_blank" href="https://makerworld.com/en/models/489999" rel="nofollow noopener">3 Slots</a></li><li>Elliptical 36x22.5mm: <a target="_blank" href="https://makerworld.com/en/models/473528" rel="nofollow noopener">1 Slot</a></li><li>Cross 43x27mm: <a target="_blank" href="https://makerworld.com/en/models/463692" rel="nofollow noopener">1 Slot</a> | <a target="_blank" href="https://makerworld.com/en/models/494621" rel="nofollow noopener">2 Slots</a></li><li>Bambu Lab Adhesive: <a target="_blank" href="https://makerworld.com/en/models/134538" rel="nofollow noopener">1 Slot</a></li></ul><h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul>

Super Glue Holder for IKEA Skadis (elliptical)

ikea skadis

EPIQ3D

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

Garden

dp makes

A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.&nbsp;I think my idea of creating a "Whistle Pan flute" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.&nbsp;This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.&nbsp;•Print settings•&nbsp;Supports: No Resolution: 0.2mm Infill: 15%&nbsp;<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Whistle Pan flute

Kids

Raptor50Titanium

This is the Wall art version of the Betaflght logo. Can be attached using the standard 3M command strips.Please comment with any suggestions.Fan of the Betaflight open source project.&nbsp;https://betaflight.com/

BetaFlight Logo Wall Art

Nice

MaXiLuPa

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:BlackPurpleBlueWhite&nbsp;!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!&nbsp;Swap Instructions:Start with BlackAt layer #12 (1.04mm) swap to PurpleAt layer #13 (1.12mm) swap to Marine BlueAt layer #14 (1.2mm) swap to White for the rest.