RubAnADUB

P1S BSMT

Storage Slots to be mounted under shelf. Allows storage for multiple Types of Wrap, Foil and Paper used for cooking and food storage. Split into 2 files. &nbsp;2 Slots fits cling wrap boxes 3 Slots is slightly smaller and fights wax paper and parchment paper boxes&nbsp;Mine holds Cling Wrap, Wax Paper, Parchment Paper and Foil

Kitchen Storage for Cling Wrap and Foil

Kitchen Items

missing_string

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/482730/2024-02-01_d61f2740304fd.jpg"></figure>YES I WOULD!&nbsp;But we can't do that quite yet, so we can just bide our time until the moment is right by downloading car parts.&nbsp;This is an add-on door handle for the Ford Maverick (Mine is a 2023 XL, but this should fit any 2022-2024 Maverick). Due to the integrated water bottle holder in the door panel, Ford decided to cut off half the door handle to allow taller water bottles to fit. That's cool and all, but I don't use taller bottles, and the stock door handle is infuriatingly awkward to use. However, there are 4 bolts on the handle that hold the trim on, and thread into a fairly substantial metal bracket within the door handle. This easy mounting point prompted me to go overengineer a solution.&nbsp;Just remove the 4 bolts, pop the new door handle between the old one and the armrest, and bolt it in. It requires a bit of force to get into place due to the fit between the handle and the armrest, which uses the cushioning as a bit of a retention mechanism, but once it's on, it's not going anywhere. I printed mine in ASA, but PETG would also work. I would not recommend PLA for this part, as temperatures inside a truck in the summer would cause it to soften and deform. My print profile is also aggressively aimed at strength, with 4 walls and 30% infill. You could absolutely get away with less, however I would recommend ensuring that the plastic is completely solid between each side of the bolt holes. My prototypes were not, and tightening the bolts caused some uncomfortable cracking sounds. I have obviously fixed this in this profile.&nbsp;I've also included a raw STL and STEP and SLDPRT files in case you want to improve on the design. Those files are all for the passenger side doors, just mirror them to get drivers' side.&nbsp;Uploaded first on MakerWorld because I have an established account here, but I'll eventually be throwing it up on Thingiverse and Printables because Ford Maverick Makers are a lot more prevelant there.

Ford Maverick Truck Interior Door Handle V1

Automotive

williamnoppen

Making my way in Fusion 360. Created this wall mount for my Synology DSM 723+

Synology 723+ Wall Mount

Synology

Agent iQ

An elegant spiral vase that looks great in every room.

Elegant Spiral Vase

Vases, Pots, and Planters

lasse1999

Hexagon pen holder with 3 rooms, standing in 45 degree angle.

Pen holder hexagon

Desk Items

Valeria Momo

My BambuStudio AMS ready print profile is loaded in the "Raw Model File" section. If you print the profile I would be happy if you will upload it as a new print profile.&nbsp;To remind everyone that without coffee we can't work. To keep on your desk (size: 9.5cm x 14cm x 4cm). In the first plate there is the sign (AMS ready), in the second the base, adaptive printing enabled. In my opinion the coffee cup could be colored brown... choose the color you prefer!<figure class="image image_resized" style="width:50.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/458155/2024-01-25_dacb86ebc2b61.png"></figure>

No Coffee No Workee | Desk Frame

Signs, Plaques, and Decor

CopyKnight

Many have tried it, but no one has realized it yet.Until today, when the big market launch begins. First of all, I would like to thank the entire team that has invested weeks and hours in the development of this project. It has been designed, engineered, constructed and tested. It was worth it, because it is a complete success.Furthermore, it is hereby expressly declared once again that remixes of this product design are completely prohibited.There are several reasons for this. The main one is that there is no reason to remix this design, as it is not without reason that no more phase or rounding than necessary has been included. There is also no need to add a logo or remove logos. Which is why there are 7 different downloads to choose from.One is the original:1: Air-Stream-Freezer (it was called that for a reason)2: Bambulab logo with lettering3: Bambulab logo single4: Bambulab logo single5: Bambulab P1S version6: Bambulab P1P version7: complete without frills, branding or logoSo there should be something for every taste, which is why, as already written, there is no sensible reason (except that people like to decorate themselves with other feathers to take credit) to remix this product.It's bad enough that it will surely only be a few weeks before it's offered for sale on a huge Asian sales platform, like many designs that are offered for free to all on platforms like this one.If anyone thinks something could be improved, they are welcome to write to me about it. We will try to realize it. We are also working hard on designing a version for the X1C and X1E.It is recommended to use the stored print profile. And of course to print it in ABS. Layer height should be 0.1 with a 0.4 nozzle.A normal support should be placed at the bottom for the ventilation ring. Everything above this ring, which must be supported, can be blocked with a large support blocker, thus reducing the printing time. The print runs normally from bottom to top. If the slicer recommends placing it at a 45 degree angle, do not do this, place it on the floor. After printing, insert a finger into the ring from above to push the support out from top to bottom. Done. Now just glue in the two magnets (4x2 and 3x2) and enjoy the real 360 degree ventilation for all further prints.Have fun&nbsp;&nbsp;Viele haben es probiert, doch niemand hat es bislang realisiert.Bis heute, heute beginnt die große Markteinführung.Zunächst einmal möchte ich mich bei dem gesamten Team bedanken, das seit Wochen, Stunden in die Entwicklung dieses Projektes investiert hat. Es wurde entworfen, designt, konstruiert und getestet. Es hat sich gelohnt, denn es ist ein voller Erfolg.Des Weiteren wird hiermit noch einmal ausdrücklich erklärt, das Remixe von diesem Produktdesign vollständig untersagt sind.Dafür gibt es mehrere Gründe. Der Entscheidende ist, es gibt keinen Grund, dieses Design zu remixen, da nicht ohne Grund keine Phase oder Abrundung mehr als diese nötig sind mit verbaut wurden. Es muss auch kein Logo raufgemacht werden oder Logos entfernt werden. Weshalb 7 verschiedene Downloads zur Auswahl stehen.Zum einen das Original:1: Air-Stream-Freezer (der wurde nicht ohne Grund so genannt)2: Bambulab Logo mit Schriftzug3: Bambulab Schriftzug einzeln4: Bambulab Logo einzeln5: Bambulab P1S Version6: Bambulab P1P Version7: komplett ohne Schnickschnack, Branding oder LogoEs sollte somit für jeden Geschmack etwas dabei sein, weshalb es wie schon geschrieben, es keinen vernünftigen Grund gibt (außer das sich gerne mit anderen Federn geschmückt wird um Lorbeeren einzusammeln), dieses Produkt zu remixen.Schlimm genug, dass es sicherlich nur wenige Wochen dauern wird, bis es auf einer riesigen asiatischen Verkaufsplattform zum Verkauf angeboten wird, so wie viele Designs die auf Plattformen wie diese hier kostenlos für alle angeboten wird.Falls jemand der Meinung ist, es könnte etwas verbessert werden, darf er mich deswegen gerne anschreiben. Wir werden versuchen es zu realisieren. Ebenso arbeiten wir mit Hochdruck daran, eine Version für den X1C und X1E zu entwerfen.Es wird empfohlen das hinterlegte Druckprofil zu verwenden. Ebenso es natürlich in ABS zu drucken. Schichthöhe sollte 0.1 mit einer 0.4er Nozzle betragen.Es sollte eine normal Stütze unten für den Lüftungsring platziert werden. Alles was oberhalb dieses Ringes der zwingend abgestützt werden muss, sich befindet, kann mit ruhigem Gewissen anhand eines großen Stützblockers blockiert werden. somit verringert sich die Zeit beim Drucken. Der Druck läuft normal von unten nach oben. Fall der Slicer empfehlen sollte es auf den 45 Grad winkel zu stellen, macht es nicht, stell es auf den Boden. Nach dem Druck sollte mit einem Finger von oben in den Ring hineingefahren werden um die Stütze von oben nach unten rauszudrücken. Fertig. Nun nur noch die zwei Magneten einkleben (4x2 und 3x2) und die echte 360 Grad Belüftung geniessen, bei allen weiteren Drucken.Viel Spaß&nbsp;

Kitchen Items

Automotive

Synology

Vases, Pots, and Planters

Desk Items

Signs, Plaques, and Decor

BambuLabs