Rosencrans.angelo

Xander Designs

Organize and secure your Cricut tools with the &#39;Hand Tool Tidy&#39; by Xander Designs,keeping them tools out of reach from curious little fingers.&nbsp;This is the first edition of a seven-part series available. Explore other creative storage solutions for your Cricut Tools while browsing through my collection.&nbsp;Inspired by Cricut Machines such as the Maker, Air, and Joy, these designs seamlessly complement your crafting machine, enhancing both style and functionality.Choose from a variety of base colors to match your machine or simply pick your favorite hues.<figure class="media"><div data-oembed-url="https://youtu.be/hfAkiG4NTLA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/hfAkiG4NTLA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Key Features:Accent colored base for a personalized touchAccommodates the entire Cricut Hand Tool RangeTwo front pockets for additional toolsPart of a coordinated set for a cohesive crafting experience&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a>

Cricut Tool Tidy Organizer

etsy

Dr Operator

UPDATE 6/21/2024: The following changes were made based on feedback that I&#39;ve received.                                                                            - Increased the contact area of the slots on Waist 3 to help with stability.                                      - Adjusted plate #6 to prevent overlapping of calibration lines when using an X1C.                                      - Increased the circumferential height of both faces to prevent tilting when installed.                                      - Added additional supports to the chest.                                      - Added an additional magnet to the chest and door to help keep the door closed.                                           - Reduced the length of Hand 1 by 10%                UPDATE 5/17/2024: Seriously, all of the necessary supports have been added thanks to @SirWaynesworth and @SrGrinch. UPDATE 5/16/2024: I&#39;ve added supports for the head as per the feedback that I&#39;ve received.  I&#39;m having a lot of fun designing stuff around the MakerWorld hardware kits and up next is a Cogsworth clock using the Clock Components Kit 011 and 4x2 mm Round Magnet (20PCS) - CA001. Links to purchase both of those items are in the Bill of Materials list down the page further. When I got the hardware kit in my hands for the first time, two ideas came to me right away. This is the bigger, more complex of the two ideas. If you&#39;re not familiar with Cogsworth, he is a character from the classic Disney movie Beauty and the Beast. Notes:<ul><li>I made a “happy” face as well as the unimpressed face and the faces can be swapped at any time.</li><li> Fully assembled, it stands 312 mm or just over 12&#34;.</li><li>The Door Window colour is listed as white in the profile because there is no colour option for Transparent PLA in Bambu studio</li><li>This was fun, we should do it again sometime.</li></ul>&nbsp;Filaments used: Bambu PLA Basic - GoldBambu PLA Basic - Black Bambu PLA Matte - Dark BrownBambu PLA Matte - Desert Tan Eryone PLA - White AMZ3D PLA - TransparentAMZ3D PLA - Sakura Pink&nbsp;<figure class="image image_resized" style="width: 45.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-21_862053b705ab98.png"></figure>ASSEMBLY: Assembly shouldn&#39;t take long at all and while technically you don&#39;t need super glue, it is recommended for certain parts. Start with the face. For this you will need the Clock component kit, both hands, both nose pieces and the face you want to use. Insert the clock component into the back of the face and secure it with the nut that comes with the kit. From there, slide the hour hand onto the face followed by the first nose piece, the minute hand and finally the nose cap.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_2b963bbc1511c8.png">  <figure class="image image_resized" style="width: 37.41%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_ef73d37de10038.png"></figure>&nbsp;&nbsp;Now we&#39;re going to assemble the head. You will need all of the head pieces and the face. Start by fitting all four Head 2 pieces into the top of the head and then fitting Head 4 on top.&nbsp;<figure class="image image_resized" style="width: 62.78%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_34e58fcd8f6178.png"></figure>&nbsp;&nbsp;From there, slide the face into the back of the head and push it forward as far as you can. The back of the head attaches via magnets. When setting the magnets into the head and the back of the head, make sure you have the polarities correct. Once you have the head together, set it aside for now.<figure class="image image_resized" style="width: 71.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_daa109bace958.png"></figure>&nbsp; For the lower body, you will need all four feet as well as all four waist pieces. Fit the waist pieces over the feet as seen below, and I would highly suggest gluing that top piece down.<figure class="image image_resized" style="width: 65.32%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e09bdb358c1618.png"></figure>&nbsp; Next up is the door. You will need the door, the door window and the Neck. The neck fits into the door and then the window attaches to the inside of the door, securing the neck in place.<figure class="image image_resized" style="width: 73.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_a64261c168d348.png"></figure>&nbsp;&nbsp;Now we&#39;re going to connect everything together. Start by attaching the legs/waist to the body, and I would highly suggest using glue to secure those pieces together. After that, attach the Arms to the body as seen below.<figure class="image image_resized" style="width: 83.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e0147e75409638.png"></figure>&nbsp; Attach the head to the body with glue being highly recommended for securing the head to the body. Last thing to do is to connect the door. The hinge on the door itself has little notches and the body and door snap together using those notches.<figure class="image image_resized" style="width: 55.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_8e84ca12c1f21.png"></figure>

Clock Components Kit 011: Cogsworth

cass

MaDutt

An Echo Dot stand that looks like a tree :)

Alexa Echo Dot Stand Tree

anthony

robotev3

I told my friend a joke about nuclear energy, but he didn’t react.

Nuclear Dice Tower With PUN

print profiles 

Magic Studio 3D

"Stitch 3D Model" 🌟🌺 Embark on a whimsical journey to the enchanting world of Disney with this delightful Stitch 3D model! Inspired by the lovable character from Lilo & Stitch, this intricately designed piece will add a touch of intergalactic charm to your decor.&nbsp;This model does not yet contain the step file, so to import it into Bamboo Studio, you just have to select all the STLs and drag it to Bambu Studio!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/399219/2023-10-27_6aa316784592c.png"></figure>&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Stitch Lightbox LED Lamp

jordan

Fletch

Spring has started, so that means it&#39;s time to get the greenhouse ready for some fresh veggies! I wanted to do some thing a little fun and different this year, so I decided to make some Mario themed seed starters for getting the plants ready. These pots are self watering, so you don&#39;t have to worry about watering them every day.&nbsp;Place a cotton ball or any wicking type material in the bottom part of the small pot. Screw the bottom onto the pot, add some dirt and seed, add a little water to the dirt, and you&#39;re ready to go. Make sure the water stays below main pot, so that the wicking material stays wet and keeps your plants happy!&nbsp;When you&#39;re ready to transplant, unscrew the bottom of the pot and push up!&nbsp;UpdateA profile for a humidity dome has been added. I decided to go with individual domes for each pot after a lot of experimenting. It somehow came out requiring less plastic and print time when printing 6 at a time vs a single dome covering the entire 3x2 tray. I recommend letting the build plate cool before trying to remove as it is only 2 surfaces and single wall. The print speed is turned down a lot to improve clarity.

Mario Seed Starter Tray - Self Watering

garden

giamma933

I SUGGEST BLUE SILK FOR SHINING EFFECT OR REPLACE WITH BLUE MARINE MATTE BAMBU &nbsp;File is ready to print, if u want to change frame color swap LASTS layers&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Silk Transmission Distance: 2PLA Bambulab gold Transmission Distance: 5PLA BambuLab Basic Jade White Transmission Distance: 5&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Blue SILK At layer #11 (0.96mm) swap to GoldAt layer #15 (1.28mm) swap to Jade White for the rest.&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up. If u want to support my work &nbsp;<a target="_blank" href="https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT" rel="nofollow noopener">https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT</a>&nbsp;&nbsp;For request send me dm

HOGWARTS VAN GOGH STYLE. HARRY POTTER HUEFORGE 

work

danjeee

Simple gelball sorter with 7.3mm holes and 20cm diameter.

Gel Ball sorter 7.3mm holes- 20cm diameter

HG_Design

GoPro boxPrepared for 2 batteries, for the machine and 6 cards.Fits GoPro 9/ 10 / 11 / 12Hope you like it

GoPro box

go pro

rennim

***NOTE*** I have an updated remix 2.0 for this model that fixed the fit up of the main sections to remove some small gaps that you may get with this original model. I recommended trying to remix 2.0 rather than this original model. Note the remix is 2x the size of this model but can be scaled down easily in the slicer.&nbsp;Powder barrel from Sea of Thieves, modeled from scratched based on a screenshot. Rather than have it as 1 individual file I have it broken down into 20 pieces that assemle without glue. Note the features are line-on-line, zero gap/clearance so if your printer isn't precise you may need to size up/down some of the features. The model assembled brilliantly for me without any sanding and without any glue.&nbsp;Let me know if you have any suggestions.

Sea of Thieves - Powder Barrel

games

7919alex

<h2>The Fixer</h2>Mein Versuch etwas als Anfänger im Fusion 360 zu konstruieren ich hoffe es gefällt

Fallout 76 The Fixer / der Ausputzer

fallout

fencko-scherrens

this is a 3d model from the Zuk slayer helm (grandmaster tasks) from osrs. The most elite helm ingame. Yet to be printed, will soon try. Will add photo's of printed product

OSRS Zuk slayer helmet (desk ornament)

RuneScape 

pinionPlus

Alphonse's head from FMA! File comes in one piece so it will need to be scaled down/ broken into parts. Happy Printing!

Alphonse Elric Helmet 

helmets 

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;This a Batman figure modeled after Batman: The Animated Series with styling by Bruce Timm.&nbsp;Watching Batman: The Animated Series (BTAS) and Justice League Unlimited animated shows, back in the day, I was introduced to Bruce Timm&#39;s minimalist, angular outlines and I loved his designs ever since. I thought that with this simplified contours, I don&#39;t need to know anatomy and would be able to draw/sculpt his characters. I collected reference materials and studied this particular style in hopes that one day I will be able to draw characters in this style.&nbsp;Life happened and 30 years after, with the tools available today, I finally had the time and courage to learn digital sculpting. It was a dream come true being able to sculpt and 3D print Bruce Timm&#39;s version of Batman.&nbsp;Throughout the sculpting process, I made sure the overall minimalist styling, angular contours and the face sculpt are accurate to the animated version but reduced some of the exaggerated proportions to improve it further. Hope you like it!<h3>IMPORTANT</h3>Please adhere to the license I set for this model. This model is NOT FOR COMMERCIAL USE. I have not given anyone permission to sell both digital or physical copies of this model.<h3>PRINTING &amp; ASSEMBLY INSTRUCTIONS</h3><ol><li>Select between the available scales:<ol><li>1/12 (6in. tall, minus the base) - ideal if you want a bigger model for display and do not have a 0.2mm nozzle</li><li>1/18 (4in. tall, minus the base) - choose this scale if you want a smaller figure that could fit a small desk or display case (requires 0.2mm nozzle). <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_df179fb2a4986.png"></li></ol></li><li>Print the parts as oriented in the profiles. Supports are required on some areas of the model. The profiles have all the supports set already. The eyes go in as one piece. They go into the eye sockets from the inside but not all the way through. Use a tweezer to get the eyes in. </li><li>Use glue/adhesive to attach the parts. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139876/design/2024-01-15_23c8734f34f18.jpg"> </li><li>BE CAREFUL removing the supports from the cowl as area especially the mask is thin and could detach along with the supports.</li></ol><h3>FILAMENTS USED</h3><ul><li>cowl, cape, boots: Polymaker Polyterra Charcoal Black</li><li>belt: Savannah Yellow</li><li>body: Matter Hackers Build PLA Silver</li><li>eyes: Inland PLA White</li><li>face: Inland PLA Pastel Pink</li></ul>

Batman Animated / Justice League Unlimited Figure

models

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

useful items

franceschellifederico

Stackable Organization Box for Various Objects - Designed from ScratchIntroducing a versatile and stackable solution for categorizing and organizing assorted items! This intricately designed 3D-printable box is a result of inspiration drawn from various models and meticulously crafted from scratch. Its modular design allows for seamless stacking, optimizing space while keeping your items neatly arranged by type.Key Features:<ul><li>Stackable design for efficient space utilization.</li><li>Thoughtfully crafted from the ground up for ease of 3D printing.</li></ul>Designed with attention to detail and practicality, this box is perfect for hobbyists, makers, or anyone seeking an innovative way to organize belongings. Elevate your storage game with this uniquely tailored solution!

Stackable Organizer Box

organization 

dfreshkremer

I made some thin baseplates that save a ton of time and filament. The models I have included are shelled out at 0.8mm.&nbsp;I have included a parametric file for Fusion 360 - you can make any size grid and change the shell thickness. &nbsp;I printed mine with a 0.4 nozzle, 0.2 layer height, and 3 walls. Shelled at 0.8. It printed great!(I tried printing at 0.5 shell, and it was too thin. I have not tried 0.6 or 0.7 yet.) &nbsp;A friend of mine printed it with a 0.6 nozzle and 0.32 layer height (with 0.7 shell). He said it also came out great!Print it right-side-up. My slicer tried to print it upside down, and it didn’t work as well. &nbsp;On a 5x5 grid, it saved me 10g of filament and almost 15 minutes of print time!<h2> </h2>

EXTREMETLY LIGHT Gridfinity Base

Grid

schiko

Similar to <a target="_blank" href="https://makerworld.com/de/models/16577" rel="nofollow noopener">GekoPrime's Clip</a> for the other places. But this one is for the male driven spindle on the gear side where the others are too small.&nbsp;I originally posted this model at <a target="_blank" href="https://www.printables.com/model/503775-retention-clip-for-pastamatic-spool-winder-driven-" rel="nofollow noopener">Printables</a>.

Retention Clip for Pastamatic Spool Winder (Driven Spindle)

spool winder

TurtleTech Creations

Want to add some fun to your boring switch dock? This is a cover for the Nintendo Switch dock that is designed for those who love Gamecube (the best system ;). This is designed for the original switch, since I do not have the OLED. May need to scale it accordingly (internal dimension is 173mm). &nbsp;Depending on your settings, this should print in less than 2 hours and require no supports. I printed this one at .25mm layer height and 10% infill and it took 1.5 hours on my Prusa Mini. I recommend a high contrasting color to really make it stand out.&nbsp;Update: added a second model for those who want the LED cutout

Nintendo Switch Dock Gamecube Cover

switch

Tipicard

Dewalt Tools Holder

garage

DFV Tech

<h4>Description:</h4>In need of a quick and easy way to store my benchy's/color samples I designed this snap-in benchy holder for the IKEA SKADIS pegboard.It simply just snaps into the slots in the pegboard and are easy to remove if needed.My pegboard is rotated 90 degrees from normal mounting position to fit on the wall, but i also designed holder for normal pegboard mounting position.1 model for normal mount with slots in vertical direction.1 model for 90 degrees rotated mount with slots in horizontal direction.The benchy is hanging in the smokestak in the mount and can be rotated 45 degrees in each direction.If you want to print your own pegboard you can try this great 200x200mm board design from <a href="https://www.prusaprinters.org/prints/73926-ikea-skadis-pegboard-200x200mm" rel="nofollow">MAQUINA</a>&nbsp;<h4>Print instruction:</h4>PLA or PetG0.20 layer hightInfill 15%Use supports on the snap lock part and in horizontal position remember to add support between the snap parts (I used PrusaSlicer 2.4.0 paint on supports with great succes. It was really easy to remove).&nbsp;<h4>On the roadmap:</h4>Snap-in signs with text (PLA, PetG, ABS, TPU etc.) to mount next to a set of benchy holders.&nbsp;Happy Printing..

Benchy holder for IKEA SKADIS

ikea

cruse2382

Edit - Reorientated and enlarged so now it prints loads better and all words a readable but would still benefit from a 0.2mm nozzle but no longer a big difference. &nbsp;will look 100% better with a 0.2mm nozzle but i don't have one fitted at the minute so did it with a 0.4mm thats why a couple of letters don't look great.

UPDATED kitchen conversion chart

kitchen

ThePotatoGod

Minecraft diamond block designed to be used with AMSFeel free to share and sell this model&nbsp;Filaments used: <a target="_blank" href="https://www.amazon.com/Polymaker-Filament-1-75mm-Steel-Printer/dp/B0B2P265SZ/ref=sr_1_1_pp?crid=38GI64UPTM9HJ&keywords=steel+gray+pla&qid=1695418071&sprefix=steel+gray+pla%2Caps%2C92&sr=8-1" rel="nofollow noopener">https://www.amazon.com/Polymaker-Filament-1-75mm-Steel-Printer/dp/B0B2P265SZ/ref=sr_1_1_pp?crid=38GI64UPTM9HJ&keywords=steel+gray+pla&qid=1695418071&sprefix=steel+gray+pla%2Caps%2C92&sr=8-1</a>&nbsp;<a target="_blank" href="https://www.amazon.com/Polymaker-Filament-1-75mm-Steel-Printer/dp/B0B2P265SZ/ref=sr_1_1_pp?crid=38GI64UPTM9HJ&keywords=steel+gray+pla&qid=1695418071&sprefix=steel+gray+pla%2Caps%2C92&sr=8-1" rel="nofollow noopener">https://www.amazon.com/Polymaker-Filament-1-75mm-Steel-Printer/dp/B0B2P265SZ/ref=sr_1_1_pp?crid=38GI64UPTM9HJ&keywords=steel+gray+pla&qid=1695418071&sprefix=steel+gray+pla%2Caps%2C92&sr=8-1</a>&nbsp;Any generic white PLA.&nbsp;

Minecraft Diamond Block

Christopher print

Lozagon1234

Embark on an intergalactic journey with our "This is the Way" Stormtrooper Helmet LED LightBox 3D model. Featuring a striking design with half a Stormtrooper helmet and the iconic phrase, this lightbox is a must-have for fans of both the Galactic Empire and the Mandalorian saga.Galactic Fusion Design: Immerse yourself in the duality of the Galactic Empire and the Mandalorian creed with a lightbox that harmoniously blends a Stormtrooper helmet with the iconic phrase "This is the Way." The design, visually captivating and symbolic, creates a striking centerpiece for any Star Wars fan's collection.Optional LED Enhancement: Elevate the intergalactic ambiance with optional LEDs that enhance both the Stormtrooper helmet and the phrase "This is the Way." Illuminate the captivating design with customizable lighting options, casting a dynamic and mesmerizing glow in your space. Immerse yourself in the Star Wars universe with the captivating illumination of the LED-enhanced lightbox.Easy 3D Printing: Designed for simplicity, this 3D model is optimized for easy printing on standard 3D printers. The user-friendly design ensures a straightforward assembly process, allowing you to effortlessly incorporate the "This is the Way" Stormtrooper Helmet LED LightBox into your space.Customization Possibilities: Express your love for Star Wars by experimenting with different filament colors to match your personal style or complement your surroundings. The modular design of the Stormtrooper Helmet LED LightBox allows for easy customization, making it a versatile and personalized addition to your collection.Perfect for Enthusiasts and Collectors: Whether you're a dedicated Star Wars aficionado, a fan of the Mandalorian, or simply appreciate symbolic designs, this 3D model is perfect for enthusiasts and collectors alike. Showcase your love for both the Galactic Empire and the Mandalorian creed by proudly displaying the "This is the Way" Stormtrooper Helmet LED LightBox in your home, office, or dedicated Star Wars space.Explore More: If you've found inspiration in the fusion of the Stormtrooper helmet and the iconic phrase, we invite you to explore our diverse collection of 3D models. From iconic symbols to personalized designs, our range caters to all Star Wars enthusiasts. Download now and bring a unique blend of Galactic Empire and Mandalorian spirit to your surroundings!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_b4f6406e7c016.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_b08833b062fce.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_1925ba3ab797e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_2ac0c906da28b.png"></figure>

Star Wars Mandalorian Helmet and text LED LightBox (StarWars)

signs and movies

thumbprint

Inner spool spacer for Bambu Lab reusable spools, allows for winding 3rd party filament or rewinding Bambu officual filament. This similar to the cardboard inner tube used in filament refills. Contains the guide notch found on the reusable spools and two filament starting holes.

Spool inner spacer for reusable spools

stuff to print

eds_3d_shop

Working on such designs takes a lot of time and if you like my work and want to support me - please print my “Designer” printprofiles! It will help me to design more! Thank you in advance!🙏&nbsp;It was time to replace my activated carbon filter again and I didn't feel like ordering and waiting again... I found a really nice model/remix for refillable charcoal /activated carbon filter for BambuLab printers at printables (Thanks to Skywarrant! :-) That suited me almost perfectly… But I had to change a few things so that I'm completely satisfied with it! :-) And I wanted to share the remixed version with you!&nbsp;<figure class="image image_resized image-style-align-left" style="width:26.74%;"><img src="https://media.printables.com/media/prints/569798/rich_content/dfdf9524-1051-4af2-9336-f730faa20a61/image-19-10-23-03-22.jpeg#%7B%22uuid%22%3A%22620154cb-9c24-4aae-887a-d95673dc0f14%22%2C%22w%22%3A750%2C%22h%22%3A1063%7D"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Here in video, I show how to change the filter material (activated carbon and HEPA!) with the help of this cool box!<a target="_blank" href="https://www.instagram.com/p/CyY9BXIr_8r/" rel="nofollow noopener">https://www.instagram.com/p/CyY9BXIr_8r/</a>&nbsp;<h4> </h4><h4> </h4>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h4>My changes:</h4><ul><li>The lid has got 2 slits to be able to open it more comfortably - take a look at the pictures!</li><li>The tab on the lid is now more solid, so it can't break now</li><li>scaled down to 98% for better, easy fit.</li><li>main box got carbon logo and lettering ;-)</li><li>extra variant of main box stl with tabs for better adhesion (take this for ABS/ASA! ;-), just cut off these small tabs with the cutter after printing.</li></ul><h4>Print Instructions:</h4>Quality:<ul><li>layer height: 0.2mm</li></ul>Strength:<ul><li>only one wall on top surfaces: off</li><li>only one wall on first layer: off</li><li>wall loops: 5 (only for “Activated_Carbon_Filter_Bottom_with_Tabs.stl”: 9 Walls!)</li><li>top shell layers: 0</li><li>bottom shell layers: 0</li><li>sparce infill density: 30% - 50% (im prefer 50% - see on pictures)</li><li>sparce infill pattern: Triangles</li><li>Infill/wall overlap: 20%</li><li>Infill combination: off</li></ul>Speed:<ul><li>first layer: 10-20mm/s</li><li>first layer infill: 10-20mm/s</li></ul>Filament: take better ASA/ABS or at least PETG - for better temperature resistance!Good and safe source for activated carbon (or just search for “Nevermore Carbon”): <a target="_blank" href="https://github.com/nevermore3d/Nevermore_Micro" rel="nofollow noopener">https://github.com/nevermore3d/Nevermore_Micro</a>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don't forget to like this model! ;-)<h3>Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/393323/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;