Ronyn999

3D_CEN岑霸玩物

Palworld Palsphere Hangings, keychain There are two versions, one is a multi-color integrated printing version and the other is a split printing version&nbsp;帕鲁球挂饰、钥匙串 有两个版本，一个多色一体打印版，一个分件打印版

Palsphere keychain 帕鲁球挂饰

PALWORLD

Jaxel

I never liked the handle on the AMS. It always felt like it was going to break the plastic. So I made this handle instead. It shifts the pivot point of the handle towards the back, so that it doesn't flex the plastic lid of the AMS as much. There are also four versions, each with the letter label of your AMS.&nbsp;I've found that the AMS handle comes with either 6mm screws, or 8mm screws. The included spacer rings are only needed if your AMS has 8mm screws and is meant to go on the underside of the lid (the rubber washers that came with the AMS go on the outside of the lid).&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

BambuLab AMS Handles

TOOLS

Xlab3d

XYZ Cube TEST40x40x40Will you be able to do it? Send a photo and coment&nbsp;This device, known as a "calibration cube," is designed to assist in the precise adjustment and calibration of 3D printers. The inclusion of a "torture ball" inside the cube adds an additional element of challenge to assess and fine-tune the printer's capability to produce intricate and complex details. Optimize your 3D printer with this innovative calibration cube!happy print!!&nbsp;Print exactly as it is in the file, but feel free to modify any value until you can commit to it.Will you be able to do it? Send a photo.&nbsp;&nbsp;

XYZ Calibration Cube with Torture Ball for 3D Printer

Calibration 

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

To print

dkduck

Test cube Bambu Lab

cali

entroisdimensions_figurine

Blastoise is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 6 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351511609" rel="nofollow noopener">PolyTerra PLA Sapphire Blue </a>(for body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351216697" rel="nofollow noopener">PolyTerra PLA army beige</a> (for belly)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> (for the edge of the shell, white of the eyes )</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcoal Black</a> (for inside ear)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351544377" rel="nofollow noopener">PolyTerra PLA Army Brown </a> (for the shell and eyes)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351806521" rel="nofollow noopener">PolyTerra PLA Fossil Grey </a>(for cannon)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: blue, brown, yellow, white, black</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Blastoise Multicolor

Pokemon

Kocyns

Thanks for video: @marsgizmo (ytb)<h4>PRINT SETTINGS</h4><ul><li>Height: 100 mm</li><li>Recommended material is PLA and layer 0,12mm</li><li>Minimal scale 75%!</li><li>Optimized model for printing without support!</li></ul><h4>Remix: <a target="_blank" href="https://makerworld.com/en/models/173902#profileId-191118" rel="nofollow noopener">Heart for Rose Bear</a></h4><figure class="image image_resized" style="width: 40.76%"><a href="https://makerworld.com/en/models/173902#profileId-191118" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152175/design/2024-02-06_bdaecc3a4c139.png"></a></figure>&nbsp;If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>

Rose Bear

Valentine

I don't like the look of LED risers. So I wanted one that was as minimal and unintrusive as possible.Unfortunately, the smallest one I could find was 20mm in height. So I made this one, at only 8mm in height!&nbsp;Uses this <a target="_blank" href="https://www.aliexpress.us/item/3256805766235306.html" rel="nofollow noopener">LED strip</a> and connects directly to the LED pins on the X1C AP board and replaces your existing LED bar. Follow the photos to understand how to put the LED strip into the base print and how to fold the LED strip around the corners.&nbsp;It's very easy to print in only 2 plates, but because of how small it is, supports are required. You can then fill it around with foam to put your glass lid on it, but I instead chose to print 2 plates of a TPU gasket, which is included in the profile. No glue is required to put this together, but I chose to seal the TPU gasket to the base print using clear silicon sealant.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!&nbsp;&nbsp;

X1C Ultra Slim LED Riser

excesoris 

Loop Layer 3D

Dyson V15/V12/V11/V10/V8/V7 Accessory Wall Mount - Holder - two models left and right with two hooks

Dyson Accessories Wall Mount two hooks

duson

Akelyte

V2 IS OUT! I HIGHLY RECOMMEND USING V2 OVER V1!&nbsp;V2 CAN BE FOUND HERE — <a target="_blank" href="https://makerworld.com/en/models/164470#profileId-180595" rel="nofollow noopener">VERSION 2</a>&nbsp;--------------------------------------------------------------------------------------&nbsp;Introducing the Z-Shield V1; a superior Z-Axis Cover for Bambu Lab P Series and X Series Printers. I’ve seen countless Z-Axis Covers for the P and X Series that simply sit in the recessed hole for the Z-Axis rod. I was never a fan of these designs, as I don’t want any component of my printer unnecessarily rubbing against plastic every time the bed moves.&nbsp;These can be printed in PLA if chamber temps are kept on the low side, but printing in ASA or ABS would yield better results. I'd appreciate any feedback, comments, or ratings if you liked this model, or would like to see some modifications made!&nbsp;Key Features:<ul><li>Universal Compatibility: The Z-Shield has been meticulously engineered to be compatible with all Bambu Core-XY printers. Whether you own an older P1P or a top-of-the-line X1C, you’ll have no issues with fitment.</li><li>Fast Printing Capability: Efficiency is key in 3D printing, and the Z-Shield stands out in this regard. Printing with supports, most models should take an hour or less to print.</li><li>Camera-Friendly Design: Understanding the importance of the built-in camera in Bambu printers, I’ve added an additional model of the Z-Shield with a recessed corner. This design ensures that the cover remains completely invisible to the onboard camera, allowing for uninterrupted monitoring and recording.</li><li>Non-Contact Protection: The non-contact design ensures there's no friction between the cover and the moving parts of the printer, thus preserving both the cover’s and the printer's integrity.</li><li>Durability and Aesthetics: The Z-Shield not only offers robust protection against environmental factors but also adds a sleek, professional look to your printer.</li></ul>&nbsp;Installation:You should hear an audible click as the Z-Shield seats into position.<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474916/2024-01-24_7b1608fe96c01.gif"></figure>There should be approximately 1.2mm of clearance between your build plate and the Z-Shield on the left side of the printer. Make sure it is fully seated towards the left side of the printer. The right side cover will have plenty of clearance but should be installed in the same way.<figure class="image image_resized" style="width:59.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474916/2024-01-24_a020bd16214b8.jpg"></figure>&nbsp;Without Camera Cutout (Cover is Visible):<img src="https://lh7-us.googleusercontent.com/i-LEeFsZ7mhDzLJoBrUFpaK5Cn5Ayh42kzByMlxjRzr8UvIq2a5LPpTnoe78sli4vxMe6kIyHyXK_228t2mwJlRtrkD-04mPqnYroHSkVYS-0WNieazHfjjHJfkTJJ3wlqeZr-n8ZRD_Kc9tQuQpT5J8avjcPYlg8IYEr5WYu7Y5RglaqBmpirXS-tBbXA">&nbsp;&nbsp;With Camera Cutout (Cover not Visible):<img src="https://lh7-us.googleusercontent.com/kTBd3_n4No1vWBt2XkfTouic3bVZd__YhO3Mgr0JYj-t8Hl48ZjBFeqc4WncfWH8GNcoTiL1w7pK1VieXHvNaKYcEIPeV91I3hxKaDiNlWuEQwHQI3y6uasFrQPMhFufEWhsRysiBWzlHUh2FFM2JeqDPc9vVaxofvwg2YZg12ArH8JV-M9sqQPhV_Ytxg">

Z-Shield V1 - Z-Axis Cover for P1P, P1S, and X1C

upgrades

peterow

🌷 Elevate your decor with our stunning 3D printed tulip with a lifelike stem! 🌿Crafted with precision and care, this beautiful tulip replica brings the beauty of spring into your home all year round. 🌼Perfect for adding a touch of nature-inspired elegance to any space, this 3D printed tulip is a conversation starter and a unique piece of art. 🎨Don't miss out on the opportunity to bring everlasting beauty to your surroundings – order yours today! 🛍️🌟&nbsp;Easy to assembly&nbsp;EDIT. Thank you guys for every download and your feedback, I'm glad to hear that and see your results. Check my latest project: Check the new project: <a target="_blank" href="https://makerworld.com/en/models/157402#profileId-172718" rel="nofollow noopener">https://makerworld.com/en/models/157402#profileId-172718</a>&nbsp;<figure class="image image_resized" style="width:41.26%;"><img src="https://makerworld.bblmw.com/makerworld/draft/455219/2024-01-26_e36f241208c27.jpeg"></figure>

Lovely Tulip with Stem, Blooming Perfection

flowers 

Rickyspanish

Adapter to use CPAP 22mm diameter tube, so you can use a CPAP fan/motor to suck the nasty air outside your printer and outside your room.  you will thank me in the near future. *** EDIT: Since some people asked me what hardware can they use in order to use a CPAP Ventilator. Im adding the links from aliexpress: <a target="_blank" href="https://www.aliexpress.com/item/1005004729010078.html?spm=a2g0o.productlist.main.1.d8515353FNxIWS&algo_pvid=3379e0a8-d920-48fc-a299-885d4d27cfa9&algo_exp_id=3379e0a8-d920-48fc-a299-885d4d27cfa9-0&pdp_npi=4%40dis%21CHF%2157.73%2146.76%21%21%2164.12%2151.94%21%402103248517084485621528895e96ae%2112000030267154667%21sea%21CH%21125679428%21&curPageLogUid=d8z7RJm71UyU&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Ventilator</a>&nbsp;<a target="_blank" href="https://www.aliexpress.com/item/1005004861341928.html?spm=a2g0o.productlist.main.3.d8515353FNxIWS&algo_pvid=3379e0a8-d920-48fc-a299-885d4d27cfa9&algo_exp_id=3379e0a8-d920-48fc-a299-885d4d27cfa9-1&pdp_npi=4%40dis%21CHF%2117.32%2113.85%21%21%2119.24%2115.39%21%402103248517084485621528895e96ae%2112000030790309575%21sea%21CH%21125679428%21&curPageLogUid=gBvRmy8vZZyn&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Tube</a>&nbsp;<a target="_blank" href="https://www.aliexpress.com/item/1005005966215186.html?spm=a2g0o.productlist.main.1.73d26928o21oJi&algo_pvid=835d964b-5d41-45b0-994d-9174ca7e8a0e&algo_exp_id=835d964b-5d41-45b0-994d-9174ca7e8a0e-0&pdp_npi=4%40dis%21CHF%2127.65%2127.65%21%21%2130.71%2130.71%21%402103244817084487373562552e5652%2112000035086029092%21sea%21CH%21125679428%21&curPageLogUid=U2pMiveut5Op&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Power supply </a>  or Any 24V that you have laying around. I just linked some of the cheaper ones from Voron.

Exhaust Bambulab X1 X1C to use with cpap fan

filter

Cinderwing3D

Hello everyone!  Today I want to present to you the first ever completely free Cinderwing3D Dragon - The Bamboo Dragon! Bambulab reached out to me asking if I wanted to make a dragon for them and seeing how I use their printers for prototyping.... it was an easy yes!As with all my designs this model is an easy print-in-place and requires no supports. All you need is a clean bed and you&#39;re off! I also have included two 3MF files for multicolor, as shown in the pictures!  Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. Please feel free to join our <a href="discord.gg/cinderwing3d" rel="nofollow">Discord</a> chat for help and discussions. Filaments used were Bambu Green PLA Basic, Bambu Red PLA Basic, and Gold Bambu Silk PLA! <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=3729583&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Feel free to use my affiliate link to grab some for yourself!</a> The Green Gradient filament <a target="_blank" href="https://amzn.to/3Htn19A" rel="nofollow noopener">can be found here!</a> The Green and Brown Gradient <a target="_blank" href="https://amzn.to/47N8EYF" rel="nofollow noopener">can be found here!</a> And the Tricolor<a target="_blank" href="https://amzn.to/3UfR3W3" rel="nofollow noopener"> is here!</a> ----- Hi, I&#39;m Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale.  The Digital files are never to be re-sold, shared, or given away!<h4>Commercial License and monthly bonus models: <a target="_blank" href="https://than.gs/u/1780858?plans=true&amp;affiliateCode=jazzyplz" rel="nofollow noopener">Thangs Memberships</a> <a target="_blank" href="https://www.myminifactory.com/users/Cinderwing3D?show=tribe" rel="nofollow noopener">Tribes</a> <a target="_blank" href="https://www.patreon.com/cinderwing3d" rel="nofollow noopener">Patreon</a></h4><h4>Please see our other public models here: Check us out on our socials! <a target="_blank" href="https://www.facebook.com/cinderwing3d" rel="nofollow noopener">Facebook</a> | <a target="_blank" href="https://twitter.com/cinderwing" rel="nofollow noopener">Twitter</a> | <a target="_blank" href="https://www.instagram.com/cinderwing3d/" rel="nofollow noopener">Instagram</a> |<a target="_blank" href="https://tiktok.com/@cinderwing3d" rel="nofollow noopener"> Tiktok</a></h4>