Ronni3

Stian_K

This is a model I made to have with my wall mountet TV, for a clean look with minimal cables hanging around.I printed mine on textured PEI with generic pla settings, but I've added differents settings. &nbsp;It's designed to print without support.&nbsp;

Nintendo Switch wall mount

Nintendo

bigdog7

This spool adapter will fit any cardboard spool with a hub size of 55 to 57mm. Print with 10% infill (I used Gyroid) and with at least 2 walls.

Cardboard Spool Adapter

Spool

This accessory unlocks 60mm thick (Fan + Rad thickness) AIO or custom loop setups for the T1.

FormD T1 - Top/Bottom Expansion Kit

FormD T1

akristofic

First thanks original designer for this model.&nbsp;I made remix of original Christmas Led tree to fit LED strip that i have.&nbsp;LEDs are mounted in “hidden" slot on the back, and powered by two AA batteries. &nbsp;I think that kind of LEDs can be bought anywhere.&nbsp;Mistletoe can be found here:<a target="_blank" href="https://makerworld.com/en/models/62158#profileId-64653" rel="nofollow noopener">https://makerworld.com/en/models/62158#profileId-64653</a>&nbsp;Christmas sock can be found here:<a target="_blank" href="https://makerworld.com/en/models/56285#profileId-57878" rel="nofollow noopener">https://makerworld.com/en/models/56285#profileId-57878</a>&nbsp;&nbsp;

Christmas tree with micro LED lights

christmas

Denste17

Now also see the new minimalistic evolution of this door holder: <a target="_blank" href="https://makerworld.com/en/models/141267#profileId-153949" rel="nofollow noopener">Minimalistic Bambu door holder by Denste17</a>&nbsp;&nbsp;Update 30-10-2023:&nbsp;Due to the demand of this model, I decided to create a two color variant with the Bambu Lab font on it.With AMS everything looks cooler and you can also see directly in which direction the holder should be put.&nbsp;&nbsp;Original Release 30-07-2023:&nbsp;I designed this simple and fast to print bracket to hold the door of the Bambu Lab X1 and P1S open.While printing PLA with textured or high temperature plates, it is possible to get nozzle clogs because of the rising chamber temperature. One solution for this is to print top glass risers with integrated vents or just to leave the door open. While leaving the door open it really bothered me to see the door vibrating.So my solution is this little bracket, which fixes the door 10cm open. The door cannot vibrate due to the printers vibrations anymore.Please pay attention to not damage your door gasket on printer side!First put the bracket on printer side and afterwards bend it slightly away from the door, so the door itself can snap into the bracket. Installation is shown on title picture.Model is mirrored, so you have your textured layer/first layer on the upper/visible side.Bye! Dennis

Simple Bambu Lab X1 X1C P1S Door Holder

Printer

make 3D

I needed a door sign for my new office space - So I made this after my favorite tv show. Hopefully others like it too. It measures 250mm x 86mm&nbsp;If you're printing this on a X1C please turn of flow calibration.

The Office Door Sign 

The Office

Simply Models

These brackets have been designed in house by Simply Models to work with Steal TwinSlot wall mounts. These brackets fit the 320mm wall mount.&nbsp;Plate1 has the LEFT/RIGHT Brackets and Plate2 has a CENTER bracket should you want to mount them side by side&nbsp;Required2or3 x TwinSlot wall mounts2+ 320mm Twinslot Wall Brackets (SDB320BC)2x Screws per brackets

Bambu Lab AMS Wall Mount Brackets to fit 320mm Twin Slot Shelving Bracket

AMU 

dewgenenny

Love wine? Love 3d printing? &nbsp;Then this is the print for you! The Infinite Wine Rack is a modular wine rack that you can print and grow to your hearts desire. &nbsp;The design is made up of three parts only - <ul><li>Hexagonal Ring - two needed per wine bottle, one for front and one for back</li><li>Inside Connector - needed for joining two rings together and extending the wine rack</li><li>Outside Connector - needed for joining two rings together but not extending</li></ul>The parts pressure fit together so that you most likely don't need to glue. At least, I haven't had to but YMMV.&nbsp;If you print this and it's useful to you I'd love you to share a make and photo :) &nbsp;&nbsp;

The Infinite Wine Rack 

Wine Rack

yannik.fpv

This poop chute does not require any exact magnets or anything like that but all the items you need should be in your stock if you own a bambulabs printer. REVISON 1.1 FILES NOW AVAILABLE (25th oct 2023) check following change-log and re-print for better results This is currently a prototype as its not 100% perfect.already have some improvements for next version that will be adjusted soon. I would also love to get some feedback from you - please post a make and your opinion when tested. If you think its worth some support i appreciate every <a target="_blank" href="https://www.paypal.me/yannikfpv" rel="nofollow noopener">donation</a>. The special: -Very space saving design. The box can be pulled forward so that there needs to be only about 70mm of space to the side of the printer. -No new exact parts are used that you have to buy. -The fill level of the box is easy to see. -The box can be easily gripped. -Compfortable emptying of the box even in small bags. -Appealing design Changelog: Rev 1.0 - basic files Rev 1.1 -optimized ramp for less chance of clog -added a cover for the ramps notch on the back - less chance of clog -optimized ramp for x1 printers -optimized bucket to store ~3x more poop b4 need to emptying.&nbsp;The ramp and box are printed from PLA (Or other hard plastics). To assemble, replace two housing screws on the back, the new screws are included in the spare parts to the printer (spare extruder screw & spare scrapper screw), see pictures.&nbsp;The printing parts both fit on one printing plate or can be printed separately from one another to use different colors. The models are printed with little tree support (only on printplate).&nbsp;Tip: Use a double sided tape to stick the ramp to the back of the printer when screwing. This reduces the likelihood of vibration.