Roninfree

Andre

Dies ist ein Wasserstandsanzeiger in Form einer Blume. Bei Benutzung des, im Projekt vorhandenen, Deckels kann ein Wasserniveau von 10cm angezeigt werden. Alle Teile können standartmäßig in PLA mit einer Layerhöhe von 0.16mm gedruckt werden. Beim Schwimmer wird PETG mit einem Infill von 5% empfohlen, aber auch da kann bei einer Wandstärke von mindestens 3 PLA genutzt werden. &nbsp;------------------------------------------------------&nbsp;This is a water level indicator in the shape of a flower. When using the lid available in the project, a water level of 10cm can be displayed. All parts can be printed in PLA with a layer height of 0.16mm as standard. For the float, PETG with an infill of 5% is recommended, but even there it can be used with a wall thickness of at least 3 PLA.

Flower Water Gauge - Wasserstandanzeige Hydroponic

hydroponics

The Crafty Maker

My latest stained glass design depicts the TARDIS from the TV show &#34;Doctor Who.&#34; The TARDIS (Time And Relative Dimension In Space) is the Doctor&#39;s time machine and spacecraft. It is famously disguised as a blue British police box, a common sight in Britain during the 1960s when the show first aired.&nbsp;In this artwork, the TARDIS is set within a gothic-style archway, creating a fusion of classic and sci-fi elements. The central TARDIS design is rendered in shades of blue, with yellow-lit windows, and surrounded by geometric patterns in purple and blue. The background features a light purple color with subtle star-like patterns, evoking a celestial theme. The entire piece is framed with a black border, enhancing its appearance as a stained-glass window, reminiscent of those found in cathedrals, but with a distinctive &#34;Doctor Who&#34; twist.&nbsp;The filaments I&#39;ve used are a mix of Bambu Lab and Extrudr filaments. The parts that resemble the stained glass are printed in Bambu Lab PETG Transparent, Translucent Purple, Translucent Brown and Extrudr PETG Transparent Blue.&nbsp;The front and back frame are both printed in Bambu Lab Basic PETG Black. All the other parts are all printed in Bambu Lab Basic PLA. The box, lid and led panel or led strip holder are printed in the color black, the diffuser is printed in the color white.&nbsp;The box and the lid have little compartments where you can glue in magnets (width 6mm &amp; height 3mm) but this is optional and not needed to keep the lid on the box.&nbsp;Print Settings&nbsp;Stained glass pieces<ul><li>100% infill</li><li>Top surface pattern: Octogram Spiral</li></ul>Front &amp; Back Frame<ul><li>Arachne wall generator or detect thin walls</li></ul>Backlight Led Panel Holder<ul><li>Regular support on build plate only</li></ul>Backlight Led Strip Holder<ul><li>Outer brim recommended</li></ul>Diffuser<ul><li>100% infill</li><li>Outer brim recommended</li></ul>Box &amp; Lid<ul><li>Outer wall speed 90 for consistent surface finish</li><li>Seam position: Back</li></ul>&nbsp;For the light source I&#39;ve used following Bambu Lab products&nbsp;EU Store<ul><li><a target="_blank" href="https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul>US Store<ul><li><a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul> ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you&#39;ll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Doctor Who's TARDIS Stained Glass Light Box

shadow box

Adam L

Changelog:<ul><li>Added Polymaker Polylite ASA (4/20/23)</li><li>Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf</li><li>(4/30/23): Fixed the ASA profile to have the filament type set to "ASA" instead of "ABS". Same exact settings otherwise as the profile from 4/21/23. New file replaces previous versions: Polymaker_Grey_PolyliteASA.3mf</li><li>(5/6/23): Added Prusament_GalaxyBlack_ASA.3mf</li><li>(5/17/23): Improved Prusament_GalaxyBlack_ASA.3mf settings. If you downloaded before this date, please re-download for better PA and retraction values.</li><li>(5/23/23): Improved Prusament_GalaxyBlack_ASA.3mf settings, again after dealing with frustrating under-extrusion issues impacting part strength. Sadly I can't get the volumetric above 11 for this one. Updated preset to my best settings.</li><li>(6/6/23): Added Prusament_SapphireBlue_ASA.3mf. Volumetric = 19 unlike the troublesome Galaxy black ASA.</li><li>(6/14/23): Added Prusament_SignalWhite_ASA.3mf, also revised the Sapphire Blue again. Note: VFR=19 on both still, but this appears aggressive for this filament and you may need to slow down the VFR to ~14 if you experience any under-extrusion issues. Annoyingly hard to tune PA for this ASA… there's no “ideal value” with either autocal or manual calibration, but 0.02 appears best. </li><li>(8/9/23): I decided not to shrink-compensate my profiles because I think it's likely to introduce confusion for people who are used to scaling for these filaments, but for people who want to combat the common shrinkage in ABS/ASA, please <a href="https://www.printables.com/model/546871-calicross-a-handy-tool-for-3d-printer-dimensional-" rel="nofollow">see my other model here that helps you calibrate.</a> </li></ul>&nbsp;<h4>What this is:</h4>This is a collection of all of my ABS/ASA filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. Right now for ABS this is polymaker-only, but I plan to try more brands. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filaments (see <a href="https://www.printables.com/@AdamL/models" rel="nofollow">my models here</a>) and you should find, by category:<ul><li><a href="https://www.printables.com/model/457260-tpuflexible-tuned-x1c-print-profiles-for-bambuorca" rel="nofollow">TPU / Flexibles</a></li><li><a href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow">Nylon/PA and PACF variants</a></li><li><a href="https://www.printables.com/model/457321-pc-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">Polycarbonate & Polycarbonate-CF</a></li><li><a href="https://www.printables.com/model/457248-pla-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">PLA / PLA + / Silk PLA</a></li><li><a href="https://www.printables.com/model/455802-petg-tuned-x1c-print-profiles-for-bambuorca-slicer/remixes" rel="nofollow">PETG</a></li></ul>CHT-Nozzle versions also available (0.4 mm , Brass)<ul><li><a href="https://www.printables.com/model/539704-chtnozzlepetg-tuned-x1c-print-profiles-for-bambuor" rel="nofollow">PETG</a></li><li><a href="https://www.printables.com/model/540552-chtnozzlepla-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">PLA</a></li><li><a href="https://www.printables.com/model/542033-chtnozzletpu-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">TPU</a></li><li><a href="https://www.printables.com/model/542058-chtnozzle-asaabs-tuned-x1c-print-profiles-for-bamb" rel="nofollow">ABS/ASA</a></li></ul><h4>How to use:</h4> These 3MF files are designed for use in Orcaslicer/Bambuslicer, but will work best in Orcaslicer, because it supports using a fixed pressure-advance value in the slicer. <ul><li>Load the 3MF file for the filament of your choosing. Files are named as <Brand>__.3mf.</li><li>(optional, recommended): Save the filament and/or print presets for your own use to your user presets for future use.</li><li>Remove the calibration cube dummy object and put your desired object in.</li><li>Print! But, turn off flow calibration option in your prints! The more reliable PA value stored in the filament profile will be used instead, and you can skip the wasted startup time, too!<ul><li><img src="https://media.printables.com/media/prints/455802/rich_content/dcbf8f87-13d5-4362-a0f5-c9b1a895b70a/image.png#%7B%22uuid%22%3A%22ff02b71c-6cd6-4ebc-b38a-446080d43e9e%22%2C%22w%22%3A440%2C%22h%22%3A110%7D"> </li></ul></li><li>If you want to use these in Bambu slicer, you won't get the PA values applied automatically sadly, and you'll have to do that with a <a href="https://forum.bambulab.com/t/flow-calibration/892/15" rel="nofollow">manual GCODE in the filament's start GCODE</a>. This is really annoying to do for each filament, but it does work. However I suggest you try Orcaslicer for this reason.</li></ul>&nbsp;<h4>Important notes:</h4><ul><li>These profiles are tuned on an X1C, with a hardened steel 0.4 nozzle installed, for use with a range of layer heights. If you have a different nozzle size or nozzle kind (steel/brass), these will be only starting points and you should re-tune most of the variables except maybe temperature.</li><li>Each 3MF also contains some of my own optimized settings for 0.16 mm prints, which I typically use, but these tuned filament profiles are designed/tuned to work across a variety of different print profiles.</li></ul><h4>Background:</h4>I use the <a href="https://github.com/SoftFever/OrcaSlicer" rel="nofollow">Orca Slicer </a>variant of Bambu's slicer because it offers finer-grained control over the slicing process and makes tuning and using tuned filament profiles much easier than Bambu's official slicer, which lacks good calibration routines for some of the most important variables in good printing: flow rate, pressure advance, and temperature and volumetric flow limits. This is particularly true for Bambu's Pressure Advance (<a href="https://github.com/bambulab/BambuStudio/issues/348" rel="nofollow">they incorrectly call this “flow”</a>) calibration, which forces you to run it every time and is unreliable, particularly on the popular textured PEI surface.Each of these profiles has been tuned for:&nbsp;<ul><li>Flow rate (aka extrusion multiplier)</li><li>Pressure advance (aka linear advance)</li><li>Temperature (with temp towers)</li><li>Volumetric flow limits (my settings are a little conservative based on printing the max volumetric flow rate calibration inside Orcaslicer)</li><li>Overrides (I typically try to avoid using these unless I have to)</li></ul>&nbsp;Disclaimer: These are free to use, and I do not own the OrcaSlicer calibration cube model, i'm just using it here as a convenient way to distribute the profiles.

- ABS/ASA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Print profiles

Whopper Printing

Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing.Features:<ul><li>Threaded Screw Mechanism: Effortlessly raises and lowers the lift,</li><li>Functional Wheels: The wheels work, enabling the model to roll smoothly,</li><li>Easy Snap Base: Simply rotate the base as indicated by the arrow on the bottom, align it with the top piece, and snap it into place to complete the setup.</li></ul>IMPORTANT: Gently free up the joints before using the screw by gently pushing down on the top and then lightly pulling.<a target="_blank" href="https://www.instagram.com/whopperprinting/reel/C7J_oilLv2e/" rel="nofollow noopener">Video Example</a>&nbsp;Support Me:<ul><li>If you enjoy this model, please explore <a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">more innovative designs on my website</a> or <a target="_blank" href="https://www.patreon.com/whopperprinting" rel="nofollow noopener">consider supporting my work on Patreon</a>. Your support helps fuel further creativity! These models are difficult and time consuming to create, so any help is greatly appreciated!</li><li>Follow me on social media @whopperprinting for updates and more.</li><li>I&#39;d love to see your prints! Share your photos; it’s always exciting to see my designs come to life in your hands.</li></ul>Thank you for your support and happy printing!

Print-in-Place Scissor Lift (No Support Needed!)

Toys

Dante

A Treble hook Cover for your safety,i ve been pinched multiple times because of it so i made this.you can scale it however you want depending on the size of the hook.Enjoy the printing

Treble Hook Cover

Hiking

Spike_Mix

This is a version of my original model <a target="_blank" href="https://makerworld.com/en/models/180647#profileId-198837" rel="nofollow noopener">Gear heart fidget toy keychain</a> for those who had trouble with the pins breaking. I&#39;ve strengthened the pins making them wider, adding a fillet to the base and adding a small hole in the middle that forces the printer to print walls that are stronger than the filling. I also changed the method of securing the gears in place, replacing the previous caps with C shaped clamps that don&#39;t need glue to attach.&nbsp;<figure class="image image_resized" style="width:56.32%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197382/design/2024-02-21_719db7624be22.png"></figure>&nbsp;*Print the base, gears and 2 C clamps.&nbsp;To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Heart gear fidget toy V2

Bela

Nakozen

The Imperial AT-ST “Chicken Walker” scouts ahead on the lush moon of Endor, seeking out any potentially rebellious individuals attempting to halt the Emperor's efforts. Fast moving and nimble for its size, and still extremely deadly with a half-decent pilot, it is not something you would want to be caught out in the open with, Jedi or not. Ohhh god is that a teddy bea--aaaarrghkk---!! This is a kit I've been wanting to make properly for a few years now, and finally sat down to give it a real attempt. I hope I have done it justice!-----------------------------------------------Some parts are super small, so some care is required. Additionally the kit should scale up just fine, although untested as of yet!On folding the main body panels, it is okay if one or two panels sheer off, it will still stick together, but if 3 or 4 fail, a little glue may be required for the roof piece! (If this is a big enough issue I may add another connection, I just wanted to preserve the top detailing.)Included is just the regular fit for the time being, try setting outer walls to print first.You can make it EVEN TIGHTER by increasing the Z-scale by 15%. For those uninterested in the card format, there is a frameless variant included! ------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive ------------------------------------------------------------My other Star Wars themed kits:X-WING - <a target="_blank" href="https://www.printables.com/model/143177-x-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/143177-x-wing-kit-card-redux</a> Y-WING - <a target="_blank" href="https://www.printables.com/model/289165-y-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/289165-y-wing-kit-card-redux</a> B-WING - <a target="_blank" href="https://www.printables.com/model/143174-b-wing-kit-card" rel="nofollow noopener">https://www.printables.com/model/143174-b-wing-kit-card</a> TIE Advanced - <a target="_blank" href="https://www.printables.com/model/143178-tie-advanced-kit-card" rel="nofollow noopener">https://www.printables.com/model/143178-tie-advanced-kit-card</a> Valen-TIE/N - <a target="_blank" href="https://www.printables.com/model/393740-valen-tien-fighter-kit-card" rel="nofollow noopener">https://www.printables.com/model/393740-valen-tien-fighter-kit-card</a> Tauntaun - <a target="_blank" href="https://www.printables.com/model/143208-tauntaun-kit-card" rel="nofollow noopener">https://www.printables.com/model/143208-tauntaun-kit-card</a> V-19 Torrent - <a target="_blank" href="https://www.printables.com/model/143196-v-19-torrent-kit-card" rel="nofollow noopener">https://www.printables.com/model/143196-v-19-torrent-kit-card</a> Tri-Fighter - <a target="_blank" href="https://www.printables.com/model/143197-tri-fighter-mini-kit-card" rel="nofollow noopener">https://www.printables.com/model/143197-tri-fighter-mini-kit-card</a> Looking to try your hand at making your own Kit Card? Follow this simple guide to get a head-start! <a target="_blank" href="https://3dwithus.com/how-to-design-kit-card-models" rel="nofollow noopener">https://3dwithus.com/how-to-design-kit-card-models</a>------------------------------------------------------------<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a><h3>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a></h3>

AT-ST Walker Kit Card

kits

Many24

A funnel which you can permanently screw on a 5l canister. Funnel also have a lid so you never have to put original lid back.I tested 3 types of canisters and it fits perfectly.I use it for used frying oil, but can be used for many different pusposes.0,3mm tolerance on the lid - fits nicely, but you can use WD40 to decrease friction<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446085/design/2024-04-28_wmrhxfx7kvdb.png"></figure><h3>Print instructions</h3><ul><li>0,16mm layer heigh for the best thread function</li><li>Printed in PLA, but any material should do</li><li>Print the funnel with brim for better adhesion - see print profile</li><li>No supports needed</li><li>4 perimeters</li></ul>

Screw-in canister funnel with lid

Organisation

IndomReps

Tool and Battery mounts for Makita 18v tools and batteries&nbsp;These are nearly universal and will fit a good portion of Makita's tools and is universal for all 18v batteries and like my other tool mount designs are decently strong and shouldn't have any issues holding any of the tools that fit on it.&nbsp;Attach them to whatever surface you want with 2 #8 screws. Tool mounts are best used in a undermount orientation but can certainly be mounted on a horizontal surface if it suites your application. The battery mounts can be mounted in whatever orientation you want as they use the batteries locking mechanism to hold the batteries in place.&nbsp;Ive printed these Pro PLA without issue and regular PLA would probably work fine as well. If you intend to put these in a work truck or trailer i'd probably use something like PETG or ABS otherwise those materials are overkill for a garage or indoor shop.&nbsp;Default profile uses .2 layer heights but you can bump up layer height for a faster print as layer height doesnt matter for these. Ive printed these on Ludicrous speed and did not have fitment issues. There are also a few plates to select from with the difference being manual snug supports added for the battery lock and gives you the option to print with or without supports.

Makita 18v - Tool & Battery Mount

Makita

Clippy923

The model as is, has some play in it. Some have found success scaling the inside of the model 101%.

SD Card Holder

Tech

Techro3D

Car headrest hook.&nbsp;for a shaft of Ø12mm (The hole is Ø12.3mm)&nbsp;center distance from the hole to the hook<ul><li>Option 1: 75mm</li><li>Option 2: 90mm</li><li>Option 3: 105mm</li></ul>

Car headrest hook | simple, handy and strong.

Martin_au

This is an updated version of my CCG card box. It now features a magnetic latch. The pivot plates are gone, and the lids now just click into place.Requires a pair of 10Ø x 3mm magnets. Base and Cart are printed right side up. Lids are printed top down. Use support for the gear teeth.See images for how to install the lids. Original model without Gridfinity base. https://www.printables.com/model/2402-ccg-geared-card-box-v2-magnetic-latch

Gridfinity geared storage box

Brate

Nagel D

Wanted something with extra storage to not waste space or filament so made large cutout and placed the caliper as low as possible to fit in slim drawers (total height including caliper 85mm). Bin is 1x6 (u) and 4(u) tall (31.8mm)Large compartment for extra storage and a smaller one to fit a blister pack of extra batteries.Magnets and screw holes (print without support)To fit 150mm digital calipers similar to one in picture, generous clearance to hopefully fit similar models.Printed on Bambu Lab P1S in about 2 hour with following settings.0.4 nozzle 0.2 layer height 2 walls 3 top/bottom layers 10% Gyroid infillNo support, no brim.Used 70g filament and print finished in 2 hours. Can probably print faster with larger nozzle or layer height.&nbsp;

Gridfinity Caliper Holder - Low profile/Extra Storage

Gridfinity

CK Designs

This is an alternative to the other packout inserts that follow the contour of the interior of the organizer. It is based off of the bins that go inside so when the lid is closed it keeps the bin from moving around. It is also a snug fit so it shouldn't move much with the lid open as well. This one is for model number 48-22-8435.

Deep Packout Full Bin Half Empty

Packout

JonnayLin

I made some smaller containers to fit in the Dewalt deep compartment organizers. &nbsp;<a target="_blank" href="https://www.homedepot.com/p/DEWALT-10-Compartment-Deep-Pro-Small-Parts-Organizer-DWST14825/203367153" rel="nofollow noopener">homedepot.com/p/DEWALT-10-Compartment-Deep-Pro-Small-Parts-Organizer-DWST14825/203367153</a>

Small parts separators for Dewalt Container

Stanley Organiser

Geoff.trickett

Downloaded to bambu studio from printables.com by BN3D

Honeycomb Interlocking Water Bottle Rack

House

hYPERfOCUS

New 20 gear model: <a target="_blank" href="https://makerworld.com/en/models/153612" rel="nofollow noopener">https://makerworld.com/en/models/153612</a>&nbsp;I set out to create one of the most versatile, complex, and clean fidget toys to challenge my design and print skills, and because I loved the concept of a 12 gear fidget spinner.&nbsp;The model includes 49 parts, and functions perfectly if your printer is well dialed in.&nbsp;The toy can be used in a number of ways. You can manually spin gears in one hand, or between two hands. You can pinch gears to spin the toy around in your hand, or spin the toy with two opposing gears. It's really quite fun, and serves as a good educational toy for kids as well.&nbsp;Putting it together is simple enough. Each gear has a screw, a washer, and a cap. Pop the screw through the gear, a washer on the back, then screw it into the core of the model. Once you've done that, you can pop the cap onto the gear.

hYPER Fidget Toy - Beveled gear fidget spinner

Fidget

RevHazlett

<h3>What Changed</h3>I wanted to stack these together but the hub PTFE disconnect tool was too short (or the buffer fork too long) for that to work. What started as fixing that resulted in the following changes:<ul><li>repaired the buffer fork as the exported mesh had some holes</li><li>the disk at the front of the fork was not centered properly so I re-created the entire front end to fix that</li><li>created an embossed version with the word “HUB” across it to identify this set as being made specifically with the Hub disconnect tool<ul><li>a non-labeled version exists as well if you do not wish to do color swaps</li></ul></li><li>increased the length of the PTFE disconnect tool to be a happy medium between the buffer fork and power disconnect tool</li><li>filled the magnet holes on the fork and PTFE disconnect tools</li><li>spaced out the magnet holes on the power disconnect tool</li><li>resized the holes in the rear of the tools<ul><li>the buffer fork has a space large enough to accommodate either a Pan or Socket head M4 screw with a washer, flush with the top surface</li><li>the PTFE disconnect tool has a through-hole</li><li>The power disconnect tool has a through hole and a hexagonal void to receive an M4 hex nut</li></ul></li></ul>I didn't want so many magnets and have a bunch of M4 screws laying around. Instead of six 6x3 magnets, you'll need:<ul><li>2x 6x3mm magnets (and CA glue/epoxy)</li><li>1x M4x18 Pan Head or Socket Head Screw</li><li>3x M4 Washers</li><li>1x M4 Hex Nut</li><li>ThreadLocker strongly recommended</li></ul>If you do not have/want to use washers, use an M4x16 Screw instead.&nbsp;<h3>Assembly</h3><ol><li>Put a washer on your screw and feed it through the large opening of the buffer fork.</li><li>Put a washer on the end of the screw and feed the screw through the hole in the PTFE disconnect tool.</li><li>Put another washer on the end of the screw and feed it through the hole in the power disconnect tool.</li><li>Add some ThreadLocker to your nut and screw it all together, just barely a little loose (to your preference).</li><li>Give the ThreadLocker some time to dry.</li><li>Glue in your magnets.</li></ol>

AMS Hub Tool Essentials - M4 Bound Set

Tools

TotalChaos

Made this stackable solution for all bambu bits and pieces to keep my printer space neat and tidy. Each body slots into each other making it one streamline unit. I thought I would share it with everyone because there was nothing on offer that allows you to customise the storage to your needs. Slim Draw (Requires Slim Body)insert 1 offer a wide range of storage with dedicated slots for hotends, wipers + screws, nozzle socks ect Slim Draw (Requires Slim Body)insert 2 offers a split section for odds and ends including pliers & cuttersFat Draw (Requires Fat Body) insert 1 offers a wide range of storage with dedicated slots for hotends, full assembly hotends, glue stick & scrapers ect MEGA UPDATE FOR A1 MINI OWNERS! I have released an A1 mini version of the Tidy System, you can find it using the link below: https://makerworld.com/en/models/80083#profileId-85022 UPDATE: 26/11/23  New Added Draws  1. Fat & Slim - Empty draws2. Slim Draw quad sections UPDATE: 27/11/23 ALL NEW COLOUR SAMPLE FILAMENT TIDY DRAW! <a target="_blank" href="https://makerworld.com/en/models/75661#profileId-80194" rel="nofollow noopener">https://makerworld.com/en/models/75661#profileId-80194</a> UPDATE: 28/11/23 Build Plate Module! <a target="_blank" href="https://makerworld.com/en/models/76785#profileId-81260" rel="nofollow noopener">https://makerworld.com/en/models/71878#profileId-76020</a> UPDATE: 30/11/23 Tidy System Top Caddy  <a target="_blank" href="https://makerworld.com/en/models/78869#profileId-83174" rel="nofollow noopener">https://makerworld.com/en/models/78869#profileId-83174</a> UPDATE: 30/11/23 Top Plate Added to Profile & Raw Download UPDATE: 04/12/23 Only Hotend Slim Draw Added (NOT FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD Only Complete Hotend Fat Draw Added (FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD UPDATE: 05/12/23Slim A1 Mini Accessory Draw ADDED PRINT PROFILE AND RAW DOWNLOAD  UPDATE: 11/12/23 Slim Colour Swatch Draw<a target="_blank" href="https://makerworld.com/en/models/89524#profileId-95815" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 14/12/23 Fat Max Body + Boxed Spares Draw<a target="_blank" href="https://makerworld.com/en/models/92978#profileId-99395" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 21/12/23 - NEW NEW DRAWS ADDED! Fat Max Draw Split Style 1 & 2 <a target="_blank" href="https://makerworld.com/en/models/101894#profileId-108493" rel="nofollow noopener">https://makerworld.com/en/models/101894#profileId-108493</a> <a target="_blank" href="https://makerworld.com/en/models/101902#profileId-108499" rel="nofollow noopener">https://makerworld.com/en/models/101902#profileId-108499</a> UPDATE: 25/12/23 NEW SLIM BLANK DRAW INSERTS! <a target="_blank" href="https://makerworld.com/en/models/106310#profileId-113505" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 29/12/23  FAT DRAW ALTERNATIVE WITH FULLY ASSEMBLED HOTENDS  <a target="_blank" href="https://makerworld.com/en/models/112956#profileId-121316" rel="nofollow noopener">DOWNLOAD HERE</a> TIDY SYSTEM TOP CADDY ALTERNATIVE VERSION <a target="_blank" href="https://makerworld.com/en/models/112974#profileId-121339" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 20/01/24 - NEW TIDY SYSTEM CONNECT -CONNECT MUTIPLE SYSTEMS TOGETHER! <a target="_blank" href="https://makerworld.com/en/models/148632#profileId-162200" rel="nofollow noopener">DOWNLOAD HERE</a>  More draw insert options to come!

Tidy System Customizable Stackable Box - Storage that grows with your needs!

Storage

LP PRINT

NUT iso stanadrd M2 to M10 measure

NUT iso stanadrd M2 to M10 measure

Components

DCprint

Build-a-Tree Kit!Super easy to print, no supports needed. Work with or without multi color printing.&nbsp;Build your own Christmas Tree allows almost infinite configurations.&nbsp;Kit includes: Stand, Spacers, 9 different levels, Tree top, Star. 3 differents designs to mix: Regular + 2 differents ornaments to choose from.&nbsp;Fully compatible with scaling. I have provided 3 different size profiles: 100%, 150% and 200%I have also provided instructions, very easy. Everyone of all ages will love!&nbsp;<ul><li>nov 29th: added a version 125% size with less tolerance</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217161/2023-11-16_52b77594b86168.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217161/2023-11-16_a7d3eeec6598b8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217161/2023-11-16_30777da30b433.png"></figure>&nbsp;

Build your own Christmas Tree  (no support needed)

Misc

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;