Rondurias

h3inz

3D Print Ready! A full chess set inspired by classic Staunton sets. Only supports required are for the Knight (Standard support seems better than tree), I have uploaded the print profile with supports. Feel free to experiment with the layer heights and infill. I printed using these settings and looked good in my opinion:<ul><li>0.2mm layer height</li><li>15% infill</li><li>Gyroid infill</li></ul>Comment below if any additional file formats are needed. Happy to help. Drop pictures of your makes and drop a like &lt;3 Personal Use Only

Classic chess set inspired by Staunton - h3inz

Gaming

Bunny coin printed in silk copper.&nbsp;I wanted to create a few special collectable coins for an Easter egg hunt that will win a big prize, raw images are also downloadable if you want to edit in Hueforge yourself.&nbsp;&nbsp;Layer colours are set up in the profile but I have listed them anyway, print both sides and glue togetherRecommend printing with a .2 nozzle but a .4 will be fine&nbsp;Start with BlackAt layer #9 (0.8mm) swap to ChocolateAt layer #12 (1.04mm) swap to CopperAt layer #16 (1.36mm) swap to White for the rest.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/albionrapture" rel="nofollow noopener">Buy Me A Coffee</a>

Easter Coin

Ostern

Cdude03

This model, put simply, allows you to open the cabinet door without worrying about water bottles launching themselves at you. The hexagonal, modular design allows you to place your water bottles exactly how you like it, and accommodates water bottles up to 3 inches in diameter.When put together, it has a total length of 9.5 inches, with the outer diameter of the hexagons being 3.75 inches. Please verify that your cabinet will work for this before hitting print.<h2>Before:</h2><figure class="image image_resized" style="width:54.26%;"><img src="https://makerworld.bblmw.com/makerworld/draft/288198/2023-12-16_a61264afb3f02.jpg"></figure><h2>After:</h2><figure class="image image_resized" style="width:41.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/288198/2023-12-16_05e89f08bddad.jpg"></figure><figure class="image image_resized" style="width:41.52%;"><img src="https://makerworld.bblmw.com/makerworld/draft/288198/2023-12-16_6247dfce4fce4.jpg"></figure>&nbsp;

Modular Water Bottle Holder

Kitchen

MazziNiX

cat - door

Cats

Mdesign

<ul><li>Please download “Raw Model Files” where you can find temp coded 3MF file.</li><li>Upload this file as project into Bambulab Studio.</li><li>You can verify temp change after slice the model and switch “Colour scheme” to “Temperature”.<ul><li>You should see second image that I uploaded with model.</li></ul></li></ul> Enjoy ! ☺️🤌

PLA temp tower 25 min, 195 - 220°C

Calibration

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Polymaker v2 print profiles are the original print profiles updated with new models. They're redesigned based on user feedback and also use 30-40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Notes:<ul><li>I've tested with several POLYMAKER PolyTerra spools and the diameters tend to vary slightly.</li><li>The Polymaker.A model fits most of my POLYMAKER spool rims. Polymaker.B has a slightly smaller inner diameter. I use both of these models on my spools.</li><li>It is possible to have Polymaker.A fit on one side of a spool and Polymaker.B fit on the other side.</li><li>The size of the holes on the spool is NOT an indicator of spool diameter from my experience.</li><li>Tested on PolyTerra spools but also may be compatible with PolyLite, PolyMax, and PolyWood.</li><li>Shown as printed with Bambu Lab PLA Basic at 0.2mm</li></ul>Features:<ul><li>Reusable</li><li>POLYMAKER nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print Polymaker.A and test BOTH SIDES of the POLYMAKER spool to see if it fits snug. If the ring is too loose for either side then print Polymaker.B and test again.</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

POLYMAKER PolyTerra Bambu Lab AMS Cardboard Spool Adapter Ring

Spulen Adapter

PrintFarm24

50 Euro Schein - PERFEKT ALS GUTSCHEIN / GESCHENK50 Euro note - PERFECT AS A VOUCHER / GIFT&nbsp;LAYER 1 - 6 BLUE / BLAULAYER 6 - 8 BLACK / SCHWARZLAYER 8 - 10 BROWN / BRAUNLAYER 10 - 13 PEACH / PFIRSICHLAYER 13 - 18 WHITE / WEISS&nbsp;WITHOUT BLUE &nbsp;LAYER 1 - 8 BLACK / SCHWARZLAYER 8 - 10 BROWN / BRAUN LAYER 10 - 13 PEACH / PFISICHLAYER 13 - 18 WHITE / WEISS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;.

HueForge 50 Euro Geldschein Geschenk Gutschein VOUCHER SAMPLE

Geschenke

WikiZell

This is the VESA MOUNT 100 / 75 Version of my previous model&nbsp;After print, no extra components are needed (screws and nuts).&nbsp;The enclosure is ready to access GPIO, CAMERA, and DISPLAY PORT&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85103#profileId-138802" rel="nofollow noopener">NORMAL MODEL (NO VESA MOUNT)</a>&nbsp;Feedback is welcome

Raspberry Pi 4 Compact Enclosure - Vesa Mount

Raspi

Qwer.Tzui

Simple Darts Display for 9 darts.&nbsp;There are 2 Versions:<ul><li>Autodarts logo “plain” for 2 color print</li><li>neutral “DARTS” text</li></ul>Mounting screws have a distance of 5cm in between.

Darts Display "Autodarts"

Darts

schiko

I used <a target="_blank" href="https://www.printables.com/de/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3" rel="nofollow noopener">Filip's Template</a> (on Printables) to create a 2x3 gridfinity holder for 4 assembled Bambu Lab hotends and 4 “hotends with nozzle” for X1C/P1P/P1S.&nbsp;Gridfinity by Zack Freedman: <a target="_blank" href="https://www.youtube.com/watch?v=ra_9zU-mnl8" rel="nofollow noopener">https://www.youtube.com/watch?v=ra_9zU-mnl8</a>&nbsp;I originally posted this model at <a target="_blank" href="https://www.printables.com/model/498195-gridfinity-holder-for-8-bambu-lab-hotendsnozzles" rel="nofollow noopener">Printables</a>.

Gridfinity Holder for 8 Bambu Lab X1/P1 Hotends/Nozzles

Gridfinity

Rott3D

We present you detailed pike head trophy.in Coop with ArtmanSimple to print, simple to wallmount.Enjoy

Pike head Trophy

Angeln

Exotech

<div><h1>Summary</h1><div>Crash pad EXC (all types) 8mm DrillingImportant is the infill ! Min 75% </div><h1>Print Settings</h1>Supports: <div>Yes</div> <pre><code> Infill: <div>75</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Redline+IR-PETG" target="_blank" rel="nofollow noopener"> Redline IR-PETG </a><pre><code> Black</code></pre></div>

 Crash pad EXC (all types) 8mm Drilling

Motorrad

JamesThePrinter

** Get an early start! Get the <a target="_blank" href="https://makerworld.com/en/models/41177" rel="nofollow noopener">Christmas version</a> now! **&nbsp;&nbsp;Light up different Halloween scenes in this display. A tea light candle is required. The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The top 2 layers should be black</li><li>If there is no moon in the scene, all other layers can be white or clear - both look nice</li><li>If there is a moon in the scene, it will look best if the bottom 2 layers are printed in clear filament<ul><li>All other layers should be white</li><li>All non-black layers could be printed in all white or all clear if one isn't available to you</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_njhnxlluv3as.png"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_ps9jc73zrxio.png"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_zosx4sj7pb0v.png"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_t3jeg8v9f9hv.png"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li></ul>

Halloween Tea Light Display

Halloween

3DFashionFreak

Fun design of these earrings of Mickey's hands forming a heart. Easy to print.

Heart Mickey Hands

Schmuck

logwave

Perfect fit LED holder for standard LED strips for the original LED lamp by BambuLabModel: <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">LED Lamp 001 by Bambu Lab - MakerWorld</a> The LED holder allows standard LED strips to be used for the base of the original LED lamp from BambuLab.A hole has been added to the bottom of the holder for an optional fusible thread. However, the holder can also be glued to the lamp base.In the example pictures a WS2812b 60LED /1m with a WLED controller was used. The WLED effects are displayed brilliantly.&nbsp;NEW: BambuLab Lamp LED socket : <a target="_blank" href="https://makerworld.com/en/models/45636#profileId-47362" rel="nofollow noopener">BambuLab Lamp LED socket by logwave - MakerWorld</a>&nbsp;------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;Passgenauer LED Halter für Standard LED Stripes für die Original LED Lampe von BambuLabModel: <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">LED Lamp 001 by Bambu Lab - MakerWorld</a>&nbsp;Durch den LED Halter können Standard LED Stripes für den Sockel der Original LED Lampe von BambuLab genutzt werden.Im Boden des Halters wurde ein Bohrung für ein optionales Schmelzgewinde hinzugefügt. Der Halter kann aber auch an den Lampenfuss geklebt werden. In den Beispielbildern wurde ein WS2812b 60LED /1m mit einem WLED Controller genutzt. Die WLED Effekte werden brillant dargestellt. &nbsp;NEU: BambuLab Lamp LED socket : <a target="_blank" href="https://makerworld.com/en/models/45636#profileId-47362" rel="nofollow noopener">BambuLab Lamp LED socket by logwave - MakerWorld</a>

BambuLab Lamp LED mount

Lampe

Reckit

01/03/2024 Added a merged accent version for AMS printing&nbsp;Added an accent profile with two more options for people who are having issues with fitting them to holder.&nbsp;The stand is designed to hold the phone with or without a case. Accents on the side are printed separately and fitted in after being printed&nbsp;No AMS is needed for dual-color print.&nbsp;Accents are a tight fit so position them into place and push down on a hard flat surface for a flush fit.&nbsp;Inspired by @libb_s - you should check out some of their models&nbsp;&nbsp;If you like this design I now have a MagSafe version and an Apple Watch Stand uploaded to Maker World<a target="_blank" href="https://makerworld.com/en/models/132925#profileId-144122" rel="nofollow noopener">https://makerworld.com/en/models/132925#profileId-144122</a>&nbsp;<figure class="image image_resized" style="width:55.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/614129/2024-01-10_66d2ad837bdf9.jpeg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/137254#profileId-149348" rel="nofollow noopener">https://makerworld.com/en/models/137254#profileId-149348</a>&nbsp;<figure class="image image_resized" style="width:54.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/614129/2024-01-13_085a75b85b1f6.jpeg"></figure>

Phone Stand (No AMS needed)

Dies & Das

DGs 3D-PRINT

-Ein Schaber zum Reinigen und Entfernen von Modellen vom Druckerbett-Einfach zu Drucken in zwei Farben mit nur einem Farbwechsel.&nbsp;