Snake River Prints

LeonDono

Hello there!&nbsp;Here&#39;s a plaque of the Achievement “Hell Dive” from HELLDIVERS 2 I named every piece of the .3mf so it&#39;s easy to change the filament color. The .3mf already has the colors for the plaque.It&#39;s ready to print!&nbsp;*Tested it in PLA with 20% infill and 3 walls.&nbsp;Achievement description: “Complete an Extreme difficulty mission or higher without anyone dying.”&nbsp;I&#39;ll be doing every achievement from the game in order (API order)&nbsp;API ID: 1

Helldivers 2 "Hell Dive" Achievement Plaque

Helldivers

YelTrik Designs - Click FOLLOW

If you've had issues with filament feeding and pulling back successfully through the AMS Filament Buffer during multiple changes, this AMS Connecting Rod is designed to help align the PTFE tube and should help reduce the likelihood of these issues. If you haven't had this issue, take my word for it, print this as a precaution. This is a two cent print where the big end connects to the barrel of the AMS Filament Buffer plug and the small end to the PTFE tube. <a target="_blank" href="https://makerworld.com/en/u/1072890529" rel="nofollow noopener">CLICK HERE TO CHECK OUT THESE OTHER PTFE ACCESSORIES</a>

AMS PTFE Connecting Rod 

AMS Parts

Teixi3D

After drawing Super Mario, some colleagues asked me for a similar one of Luigi, after some tests this has been one of the best results, but I don't think I have managed to match Mario's, but I still hope you like it.&nbsp;I invite my colleagues to make remixes with other colors, and I would appreciate it if you could send a photo of the results, some of you will surely get better results.&nbsp;I include original photo that I created, in case you want to experiment directly with HueForge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyLite Pro Metallic Blue Transmission Distance: 0.3 PLA PolyTerra Forest Green Transmission Distance: 0.5 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 PLA PolyLite Pro Cold White Transmission Distance: 0.5Swap Instructions: Start with Metallic Blue At layer #9 (0.8mm) swap to Forest Green At layer #16 (1.36mm) swap to Arctic Teal At layer #21 (1.76mm) swap to Cold White for the rest.

Luigi from Super Mario (HueForge)

Hueforge

KF Designs

This is a Nintendo Classic Logo Lightbox. !! Remove the purge line at the beginning of printing !! The profile works OK with my settings but you must check and dial in your Printer accordingly. there is a hole on the back side to hang the Lightbox and a hole on the side for a USB-C adaptor … If you don't want to use the USB adaptor i have also included a small cap with a 4mm hole just to fit your cable in and another cap without a hole if you want to use a battery pack in it. Enjoy ! USB-C Adaptor :<a target="_blank" href="https://s.click.aliexpress.com/e/_DBngla9" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DBngla9</a> LEDs : <a target="_blank" href="https://s.click.aliexpress.com/e/_DnlApXf" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DnlApXf</a>

Nintendo Classic Logo Lightbox 

Lightboxes

Powerpill.prints

<img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-18_5fb8e169839cd.png"> This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go! Most keychains take between 45 minutes to 1.5h to print!<h2>This Keychain pack has 50 items in it separated onto 36 different plates! Games included:</h2><h3>Metroid, Zelda I & II, Duck Hunt, Super Mario Brothers, Dr. Mario, Punch Out, Donkey Kong, Ice Hockey, Excitebike, Balloon Fight, Kid Icarus, and Ice Climber!</h3><h2>Check out My other Video Game Keychain Packs here:</h2><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_bf102988c5d4e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_af8e11b72f8b8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_d591f34521b71.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite! <img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_65642b6d44be1.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there's one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you'd like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_39c8a218834e3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-20_5772d38e54629.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn't think the increased print time was really worth the extra quality. It's definitely noticeable, but I didn't think the tradeoff was there. Feel free to experiment and try it yourself!<img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_e1de8136a8cba.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-20_652472aa40ac8.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you're not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-20_5bb325e63de11.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I'd love to make any adjustments necessary so they all print great! If there's any other packs or characters you want to see, leave a comment! Like this pack? Check out my other video game keychain packs here: <figure class="table" style="height:261.055px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-02-16_bee3dac9a4a4f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-01-29_ca2f6c28ed6ef.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-01-29_1f9887d1aa63b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568770/2024-01-29_c6b1251ef82d6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain & Wall Art Pack</a></td></tr></tbody></table></figure>

Helldivers

AMS Parts

Hueforge

Lightboxes

Keychains